Previous 1 2 Next 29 Replies Latest reply: Oct 2, 2006 1:06 PM by induhvidual Go to original post
  • Arcana_J Level 1 Level 1 (0 points)
    *slaps forehead*

    Yes, it worked. I can't believe it was that simple! Why would the settings have changed? I know I didn't change them manually before now.
  • Arcana_J Level 1 Level 1 (0 points)
    Oops, I forgot to mark "answered".
  • Nathan C Level 5 Level 5 (6,260 points)
    Some settings may, not always, but may revert when a new version of the software is installed.
  • Arcana_J Level 1 Level 1 (0 points)
    Ah, thanks Nathan!
  • fshea Level 1 Level 1 (0 points)
    I've got the same problem.
    My CD's burned great in 6 and will not burn in 7.0 or 7.018

    I'm getting tired of wasting coasters that are getting expensive
  • Nathan C Level 5 Level 5 (6,260 points)
    fshea,

    Your issue is a bit different. I have applied to you in the thread where you posted your CD/DVD diagnostics.
  • ganny76 Level 1 Level 1 (0 points)
    I am having a similiar problem. My itunes stopped reading my burner information. When I try to burn it says "Disc burner or software not found". Everything was fine and then all of the sudden it stopped. Any ideas? I tried re-installing, but that did nothing. I ran the diagnostics and this is what it says:

    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Inc. Dell DM051
    iTunes 7.0.1.8
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.0),


    IDE\DiskST380819AS_____________________________8.04___
    Could not open CD handler, 5. Problem with installation of drive in Windows or drive contains copy protected CD.
    USBSTOR\DiskOTi____Flash_Disk_____2.00
    Could not open CD handler, 5. Problem with installation of drive in Windows or drive contains copy protected CD.
    IDE\CdRomTSSTcorpCD-RW___TS-H292B_______________DE03___, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomTSSTcorpDVD-ROM_TS-H352C_______________DE02___, Bus Type ATA, Bus Address [0,0]
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.

    Current user is not an administrator.

    Failed while scanning for CD / DVD drives, error 2510.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.

    D: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.

    Failed while scanning for CD / DVD drives, error 2510.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.

    E: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.


    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive E: TSSTcorp CD-RW TS-H292B on -128(0xffffff80) media at speed 0X.
    Please help!
  • sc420 Level 1 Level 1 (0 points)
    yeah im havin the same thing happen now too heres what diagnostics says on my machine..

    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Dimension 8100
    iTunes 7.0.1.8
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    UpperFilters: GEARAspiWDM (2.0.6.0),
    Video Driver: NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)\GeForce2 MX/MX 400


    IDE\DiskST380011A______________________________3.16___
    Could not open CD handler, 5. Problem with installation of drive in Windows or drive contains copy protected CD.
    IDE\CdRomSAMSUNGCD-ROM_SC-148C__________________C002___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSONYCD-RW__CRX160E_____________________1.0g___, Bus Type ATA, Bus Address [1,0]
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.

    Current user is not an administrator.

    Failed while scanning for CD / DVD drives, error 2510.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.

    D: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.

    Failed while scanning for CD / DVD drives, error 2510.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.

    E: Unsupported CD or DVD drive.
    Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.


    The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive E: SONY CD-RW CRX160E on CDR media at speed 12X.
  • gnomesiii Level 1 Level 1 (0 points)
    starts burning then stops...
    any assistance ould be greatly appreciated, thanks

    Bobby W


    Microsoft Windows Vista Professional Service Pack 0, v.3 (Build 5728)
    Hewlett-Packard Pavilion zd7000 (PF163U#ABA))
    iTunes 7.0.1.8
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    UpperFilters: GEARAspiWDM (2.0.6.0),


    IDE\DiskIC25N080ATMR04-0______________________MO4OAD5A
    Could not open CD handler, 5. Problem with installation of drive in Windows or drive contains copy protected CD.
    IDE\CdRomHL-DT-STDVD+RW_GCA-4040N_______________1.19___, Bus Type ATA, Bus Address [0,0]
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.

    Current user is not an administrator.

    D: HL-DT-ST DVD+RW GCA-4040N, Rev 1.19
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 24.
    The drive CDRW speeds are: 24 0.
    The drive DVDR speeds are: 24.
    The drive DVDRW speeds are: 24.

    Force Optical Power Calibration before burn is turned on in the preferences.

    The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive D: HL-DT-ST DVD+RW GCA-4040N on CDRW media at speed 10X.


    HP Laptop, 3.2ghz, Win Vista   Other OS   Love itunes,ipod,airtunes (Major Audiophile)
  • Nathan C Level 5 Level 5 (6,260 points)
    ganny76, sc420, and gnomesiii,

    Could you try under and admin user?
  • gnomesiii Level 1 Level 1 (0 points)
    i am the administrator, but it comes up as i am not
  • gnomesiii Level 1 Level 1 (0 points)
    in win vista i must turn off the user account control (uac)
    and i must also not record faster than 8x

    my cd drivers are not quite yet optimized for windows vista

    have trouble seeing audio cd's
  • gnomesiii Level 1 Level 1 (0 points)
    i have the burner working now, but need to keep it set at 8x, but the quality of the cd seems to be degrading as the disc progresses. the last 4 or 5 tracks on the burned cd wont play well in the car cd, but play well on the pc

    any thoughts would be appreciated
    ty

    BW
  • BradWW Level 1 Level 1 (0 points)
    Nathan C,

    I am having the same problem on WinXP Pro running iTunes 7.0.1. I get the error "Disc burner or software not found..." When I give myself administrator privileges I can then burn. Worked fine with iTunes 6.

    7.0.1 is much better than 7.0.0 (which was a DISASTER on my computer), but I am still having some audio breakup when I scroll with the mouse wheel. This seems to happen also or mainly when I scroll in another program (like Firefox) when iTunes is playing. One time it was distorted and breaking so bad, I had to pause and then play again for the music to even be listenable.

    Apple has some work to do before iTunes 7 is back to the quality level of iTunes 6. I hope the problems mentioned above will be fixed in 7.0.2.

    Brad


    AMD Athlon   Windows XP Pro  
  • induhvidual Level 1 Level 1 (0 points)
    I keep having the same problem. Error 4261. These are my diagnostics:

    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    ECS M810D
    iTunes 7.0.1.8
    CD Driver 2.0.6.0
    CD Driver DLL 2.0.6.0
    LowerFilters: PxHelp20 (2.0.0.0),
    UpperFilters: GEARAspiWDM (2.0.6.0),
    Video Driver: SiS 650651_M650740\SiS Compatible VGA


    IDE\DiskMaxtor90845D4_________________________GAS54112, Bus Type ATA, Bus Address [1,0]
    IDE\DiskWDCWD1600JB-00GVC0____________________08.02D08, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomOPTORITEDVD_RW_DD0405__________________140I___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSAMSUNGDVD-ROM_SD-816B_________________H000___, Bus Type ATA, Bus Address [1,0]
    SCSI\CdRomMV3235ZATY240N_________1.0, Bus Type SCSI, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.

    Current user is an administrator.

    E: OPTORITE DVD RW DD0405, Rev 140I
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4 8 16 24 32 40.
    The drive CDRW speeds are: 4.
    The drive DVDR speeds are: 4.
    The drive DVDRW speeds are: 4.

    F: SAMSUNG DVD-ROM SD-816B, Rev H000
    Data or MP3 CD in drive.
    Found 1 songs on CD, playing time 72:58 on CDROM media.
    Track 1, start time 00:02:00
    Get drive speed succeeded.

    G: MV3235Z ATY240N, Rev 1.0
    Data or MP3 CD in drive.
    Found 1 songs on CD, playing time 55:32 on CDROM media.
    Track 1, start time 00:02:00
    Get drive speed succeeded.

    Writing CD text is turned on in the preferences. If you're having problems burning CDs, try turning this preference off.
    Force Optical Power Calibration before burn is turned on in the preferences.

    The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive E: OPTORITE DVD RW DD0405 on CDR media at speed 16X.
Previous 1 2 Next