Safari address bar typing lag / freeze

Click in the address bar to select whatever is in it, then delete. A magnifying-glass icon will appear at the left end of the bar. Click that, then select Clear Recent Searches from the menu that drops down.

Hi there is something wrong with the search bar in the Yosemite. the search bar won't let me even put where i live, it isn't reckonizing anything I type properly and asks me is it (spelt like) ?

This was working fine a couple of days ago but is not now. 😟 if i use the bing bar search or google it all works fine.

Yeah I know doesn’t solve it just asking if anyone elsa has problems and is there a cure . 🙂

Please read this whole message before doing anything.

This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.

Step 1

The purpose of this step is to determine whether the problem is localized to your user account.

Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”

While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.

Test while logged in as Guest. Same problem?

After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.

*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

Step 2

The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.

Please take this step regardless of the results of Step 1.

Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.

Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.

Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.

The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.

Test while in safe mode. Same problem?

After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Launch the Console application in any of the following ways:

☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad. Click Utilities, then Console in the icon grid.

The title of the Console window should be All Messages. If it isn't, select

SYSTEM LOG QUERIES ▹ All Messages

from the log list on the left. If you don't see that list, select

View ▹ Show Log List

from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.

The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.

Please don't indiscriminately dump thousands of lines from the log into this discussion.

Please don't post screenshots of log messages—post the text.

Some private information, such as your name, may appear in the log. Anonymize before posting.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.

Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.

2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.

There are ways to back up a computer that isn't fully functional. Ask if you need guidance.

3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.

You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.

In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.

You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.

Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.

4. Here's a summary of what you need to do, if you choose to proceed:

☞ Copy a line of text in this window to the Clipboard.

☞ Paste into the window of another application.

☞ Wait for the test to run. It usually takes a few minutes.

☞ Paste the results, which will have been copied automatically, back into a reply on this page.

The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.

5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.

6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.

7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.

Triple-click anywhere in the line of text below on this page to select it:

PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { split("'"${p[41]}"'",b);for(i in b) print b[i]".plist";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' /:/d;/\./p;' '/\.appex\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:|suhel| VALI|ver-r|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" 'L*/P*/com.ap*.p*.ext*.*.*t -exec '"${c1[14]}"' :displayOrder" {} \;' 'L*/{Con*/*/Data/L*/,}Pref* -type f -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors appexes Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 4 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-

Copy the selected text to the Clipboard by pressing the key combination command-C.

8. Launch the built-in Terminal application in any of the following ways:

☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.

Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.

9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter

exec bash

and press return. Then paste the script again.

10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.

If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.

11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line

[Process completed]

to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.

12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.

At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.

If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.

13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.

14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.

______________________________________________________________

Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Hi,

I have the exact problem and it appears only on my admin account, its not there in the guest account.

Hi,

You said:

4. Here's a summary of what you need to do, if you choose to proceed:

☞ Copy a line of text in this window to the Clipboard.

Which line I have to copy?

And when you said (in this window), which window did you mean?

And which other application do I have to paste the copied line in?

Please help

Fahad

Start time: 20:45:23 04/15/16

Model Identifier: MacBookPro10,2

System Version: OS X 10.11.4 (15E65)

Kernel Version: Darwin 15.4.0

System Integrity Protection: Enabled

Time since boot: 20 minutes

SATA

OWC Aura

USB

Elements 10A8 (Western Digital Technologies, Inc.)

Diagnostic reports

2016-04-15 VLC crash

Log

Apr 15 19:43:03 AssertMacros: tmpData (value: 0x0), file: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

Apr 15 19:43:03 IO80211ControllerMonitor::configureSubscriptions() failed to add subscriptionIO80211Controller::start _controller is 0x83bb7ff4eb5cb1f7, provider is 0x83bb7ff42c164ef7

Apr 15 19:43:03 init: error getting PHY_MODE; using MODE_UNKNOWN

Apr 15 19:43:03 000001.621702 PRT3@14200000: AppleUSB20XHCIPort::resetAndCreateDevice: failed to create device, disabling port

Apr 15 19:43:05 USBF: 4.607 IOUSBHIDDriver(IOUSBHIDDriver)::RearmInterruptRead returning error 0xe00002d8 (device is not ready), not issuing any reads to device

Apr 15 19:43:14 **** [IOBluetoothHostControllerUSBTransport][InterruptReadHandler] -- Received kIOReturnNotResponding error - retrying: 1

Apr 15 19:44:26 **** [IOBluetoothHostControllerUSBTransport][InterruptReadHandler] -- Received kIOReturnNotResponding error - retrying: 1

Apr 15 19:48:08 Process launchd [1] disabling system-wide I/O Throttling

Apr 15 19:48:08 Process launchd [1] disabling system-wide CPU Throttling

Apr 15 19:48:46 AssertMacros: tmpData (value: 0x0), file: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

Apr 15 19:48:46 IO80211ControllerMonitor::configureSubscriptions() failed to add subscriptionIO80211Controller::start _controller is 0xb9426d5c0a8014fd, provider is 0xb9426d5b4b2041fd

Apr 15 19:48:46 init: error getting PHY_MODE; using MODE_UNKNOWN

Apr 15 19:48:46 000001.605304 PRT3@14200000: AppleUSB20XHCIPort::resetAndCreateDevice: failed to create device, disabling port

Apr 15 19:48:48 USBF: 4.614 IOUSBHIDDriver(IOUSBHIDDriver)::RearmInterruptRead returning error 0xe00002d8 (device is not ready), not issuing any reads to device

Apr 15 19:48:59 **** [IOBluetoothHostControllerUSBTransport][InterruptReadHandler] -- Received kIOReturnNotResponding error - retrying: 1

Apr 15 19:52:40 **** [IOBluetoothHostControllerUSBTransport][InterruptReadHandler] -- Received kIOReturnNotResponding error - retrying: 1

Apr 15 20:25:23 AssertMacros: tmpData (value: 0x0), file: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785

Apr 15 20:25:23 IO80211ControllerMonitor::configureSubscriptions() failed to add subscriptionIO80211Controller::start _controller is 0x751d3191d0c9590b, provider is 0x751d3191120a460b

Apr 15 20:25:23 jnl: b(1, 2): replay_journal: from: 45856768 to: 52689408 (joffset 0x15e0000)

Apr 15 20:25:23 init: error getting PHY_MODE; using MODE_UNKNOWN

Apr 15 20:25:23 000001.738502 PRT3@14200000: AppleUSB20XHCIPort::resetAndCreateDevice: failed to create device, disabling port

Apr 15 20:25:23 jnl: b(1, 2): journal replay done.

Apr 15 20:25:24 USBF: 5.117 IOUSBHIDDriver(IOUSBHIDDriver)::RearmInterruptRead returning error 0xe00002d8 (device is not ready), not issuing any reads to device

Apr 15 20:25:38 **** [IOBluetoothHostControllerUSBTransport][InterruptReadHandler] -- Received kIOReturnNotResponding error - retrying: 1

Apr 15 20:25:41 **** [IOBluetoothHostControllerUSBTransport][InterruptReadHandler] -- Received kIOReturnNotResponding error - retrying: 1

Activity

Net: 1984 in, 46 out (KiB/s)

kexts

com.paragon-software.filesystems.ntfs (187.1.14) UUID

org.binaervarianz.driver.insomnia (1.6.0) UUID

Daemons

com.oracle.java.Helper-Tool

com.paragon.NTFS.launch

com.adobe.fpsaud

Agents

com.paragon-software.NTFS.fsnotifyagent

com.vimov.weatherhd.mac.menulauncher

com.bittorrent.uTorrent

com.oracle.java.Java-Updater

com.paragon.updater

com.apple.AirPortBaseStationAgent

Bundles

/Library/Extensions/SteerMouse.kext

- jp.plentycom.driver.SteerMouse

/Library/Extensions/ufsd_NTFS.kext

- com.paragon-software.filesystems.ntfs

/Library/Internet Plug-Ins/Flash Player.plugin

- N/A

/Library/Internet Plug-Ins/JavaAppletPlugin.plugin

- com.oracle.java.JavaAppletPlugin

/Library/PreferencePanes/Flash Player.prefPane

- com.adobe.flashplayerpreferences

/Library/PreferencePanes/JavaControlPanel.prefPane

- com.oracle.java.JavaControlPanel

/Library/PreferencePanes/ParagonNTFS.prefPane

- com.paragon-software.NTFS.prefpane

/Library/PreferencePanes/SteerMouse.prefPane

- jp.plentycom.prefpane.SteerMouse

Contents of /etc/hosts (checksum 3164423663)

127.0.0.1 localhost

255.255.255.255 broadcasthost

::1 localhost

Contents of /etc/pf.conf (checksum 2891177609)

scrub-anchor "com.apple/*"

nat-anchor "com.apple/*"

rdr-anchor "com.apple/*"

dummynet-anchor "com.apple/*"

anchor "com.apple/*"

load anchor "com.apple" from "/etc/pf.anchors/com.apple"

Contents of /etc/syslog.conf (checksum 2399118465)

install.* @127.0.0.1:32376

Contents of /etc/pam.d/authorization (checksum 1288902703)

auth optional pam_krb5.so use_first_pass use_kcminit

auth optional pam_ntlm.so use_first_pass

auth required pam_opendirectory.so use_first_pass nullok

account required pam_opendirectory.so

Contents of /etc/pam.d/checkpw (checksum 2672765862)

auth required pam_opendirectory.so use_first_pass nullok

account required pam_opendirectory.so no_check_home no_check_shell

Contents of /etc/pam.d/chkpasswd (checksum 335781771)

auth required pam_opendirectory.so

account required pam_opendirectory.so

password required pam_permit.so

session required pam_permit.so

Contents of /etc/pam.d/cups (checksum 2842188894)

auth required pam_opendirectory.so

account required pam_permit.so

password required pam_deny.so

session required pam_permit.so

Contents of /etc/pam.d/ftpd (checksum 2001169128)

auth required pam_opendirectory.so

account required pam_permit.so

password required pam_deny.so

session required pam_permit.so

Contents of /etc/pam.d/login (checksum 1242678644)

auth optional pam_krb5.so use_kcminit

auth optional pam_ntlm.so try_first_pass

auth optional pam_mount.so try_first_pass

auth required pam_opendirectory.so try_first_pass

account required pam_nologin.so

account required pam_opendirectory.so

password required pam_opendirectory.so

session required pam_launchd.so

session required pam_uwtmp.so

session optional pam_mount.so

Contents of /etc/pam.d/login.term (checksum 3930746290)

account required pam_nologin.so

account required pam_opendirectory.so

session required pam_uwtmp.so

Contents of /etc/pam.d/other (checksum 2748091512)

auth required pam_deny.so

account required pam_deny.so

password required pam_deny.so

session required pam_deny.so

Contents of /etc/pam.d/passwd (checksum 1026516346)

auth required pam_permit.so

account required pam_opendirectory.so

password required pam_opendirectory.so

session required pam_permit.so

Contents of /etc/pam.d/rshd (checksum 1553764881)

auth required pam_permit.so

account required pam_nologin.so

account required pam_opendirectory.so

session required pam_launchd.so

Contents of /etc/pam.d/screensaver (checksum 3141704602)

auth optional pam_krb5.so use_first_pass use_kcminit

auth required pam_opendirectory.so use_first_pass nullok

account required pam_opendirectory.so

account sufficient pam_self.so

account required pam_group.so no_warn group=admin,wheel fail_safe

account required pam_group.so no_warn deny group=admin,wheel ruser fail_safe

Contents of /etc/pam.d/smbd (checksum 2516643123)

account required pam_sacl.so sacl_service=smb allow_trustacct

session required pam_permit.so

Contents of /etc/pam.d/sshd (checksum 2989478361)

auth optional pam_krb5.so use_kcminit

auth optional pam_ntlm.so try_first_pass

auth optional pam_mount.so try_first_pass

auth required pam_opendirectory.so try_first_pass

account required pam_nologin.so

account required pam_sacl.so sacl_service=ssh

account required pam_opendirectory.so

password required pam_opendirectory.so

session required pam_launchd.so

session optional pam_mount.so

Contents of /etc/pam.d/su (checksum 2045483434)

auth sufficient pam_rootok.so

auth required pam_opendirectory.so

account required pam_group.so no_warn group=admin,wheel ruser root_only fail_safe

account required pam_opendirectory.so no_check_shell

password required pam_opendirectory.so

session required pam_launchd.so

Contents of /etc/pam.d/sudo (checksum 3515993703)

auth required pam_opendirectory.so

account required pam_permit.so

password required pam_deny.so

session required pam_permit.so

Contents of /etc/periodic/daily/110.clean-tmps (checksum 4099837049)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

case "$daily_clean_tmps_enable" in

[Yy][Ee][Ss])

if [ -z "$daily_clean_tmps_days" ]

then

echo '$daily_clean_tmps_enable is set but' \

'$daily_clean_tmps_days is not'

rc=2

else

echo ""

echo "Removing old temporary files:"

set -f noglob

args="-atime +$daily_clean_tmps_days -mtime +$daily_clean_tmps_days"

args="${args} -ctime +$daily_clean_tmps_days"

dargs="-empty -mtime +$daily_clean_tmps_days"

dargs="${dargs} ! -name .vfs_rsrc_streams_*"

[ -n "$daily_clean_tmps_ignore" ] && {

args="$args "`echo " ${daily_clean_tmps_ignore% }" |

sed 's/[ ][ ]*/ ! -name /g'`

dargs="$dargs "`echo " ${daily_clean_tmps_ignore% }" |

sed 's/[ ][ ]*/ ! -name /g'`

...and 21 more line(s)

Contents of /etc/periodic/daily/130.clean-msgs (checksum 4292599426)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

case "$daily_clean_msgs_enable" in

[Yy][Ee][Ss])

if [ ! -d /var/msgs ]

then

echo '$daily_clean_msgs_enable is set but /var/msgs' \

"doesn't exist"

rc=2

else

echo ""

echo "Cleaning out old system announcements:"

[ -n "$daily_clean_msgs_days" ] &&

arg=-${daily_clean_msgs_days#-} || arg=

msgs -c $arg && rc=0 || rc=3

fi;;

*) rc=0;;

esac

exit $rc

Contents of /etc/periodic/daily/140.clean-rwho (checksum 659374794)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

case "$daily_clean_rwho_enable" in

[Yy][Ee][Ss])

if [ -z "$daily_clean_rwho_days" ]

then

echo '$daily_clean_rwho_enable is enabled but' \

'$daily_clean_rwho_days is not set'

rc=2

elif [ ! -d /var/rwho ]

then

echo '$daily_clean_rwho_enable is enabled but /var/rwho' \

"doesn't exist"

rc=2

else

echo ""

echo "Removing stale files from /var/rwho:"

case "$daily_clean_rwho_verbose" in

[Yy][Ee][Ss])

print=-print;;

*)

print=;;

...and 14 more line(s)

Contents of /etc/periodic/daily/199.clean-fax (checksum 1104983357)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

if [ -d /var/spool/fax ]; then

echo ""

echo "Removing scratch fax files"

cd /var/spool/fax && \

find . -type f -name '[0-9]*.[0-9][0-9][0-9]' -mtime +7 -delete >/dev/null 2>&1;

fi

Contents of /etc/periodic/daily/310.accounting (checksum 3208203734)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

case "$daily_accounting_enable" in

[Yy][Ee][Ss])

if [ ! -f /var/account/acct ]

then

echo '$daily_accounting_enable is set but /var/account/acct' \

"doesn't exist"

rc=2

elif [ -z "$daily_accounting_save" ]

then

echo '$daily_accounting_enable is set but ' \

'$daily_accounting_save is not'

rc=2

else

echo ""

echo "Rotating accounting logs and gathering statistics:"

cd /var/account

rc=0

n=$daily_accounting_save

rm -f acct.$n.gz acct.$n || rc=3

m=$n

...and 18 more line(s)

Contents of /etc/periodic/daily/400.status-disks (checksum 1480768650)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

case "$daily_status_disks_enable" in

[Yy][Ee][Ss])

echo ""

echo "Disk status:"

df $daily_status_disks_df_flags && rc=1 || rc=3

;;

*) rc=0;;

esac

exit $rc

Contents of /etc/periodic/daily/420.status-network (checksum 2730873650)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

case "$daily_status_network_enable" in

[Yy][Ee][Ss])

echo ""

echo "Network interface status:"

case "$daily_status_network_usedns" in

[Yy][Ee][Ss])

netstat -i && rc=0 || rc=3;;

*)

netstat -in && rc=0 || rc=3;;

esac;;

*) rc=0;;

esac

exit $rc

Contents of /etc/periodic/daily/430.status-rwho (checksum 3455351261)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

case "$daily_status_rwho_enable" in

[Yy][Ee][Ss])

rwho=$(echo /var/rwho/*)

if [ -f "${rwho%% *}" ]

then

echo ""

echo "Local network system status:"

prog=ruptime

else

echo ""

echo "Local system status:"

prog=uptime

fi

rc=$($prog | tee /dev/stderr | wc -l)

if [ $? -eq 0 ]

then

[ $rc -gt 1 ] && rc=1

else

rc=3

fi;;

...and 3 more line(s)

Contents of /etc/periodic/daily/999.local (checksum 2319755381)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

rc=0

for script in $daily_local

do

echo ''

case "$script" in

/*)

if [ -f "$script" ]

then

echo "Running $script:"

sh $script || rc=3

else

echo "$script: No such file"

[ $rc -lt 2 ] && rc=2

fi;;

*)

echo "$script: Not an absolute path"

[ $rc -lt 2 ] && rc=2;;

esac

done

exit $rc

Contents of /etc/periodic/monthly/199.rotate-fax (checksum 3437454680)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

echo ""

printf %s "Rotating fax log files:"

cd /var/log/fax

for i in *.log; do

if [ -f "${i}" ]; then

echo -n " $i"

if [ -x /usr/bin/gzip ]; then gzext=".gz"; else gzext=""; fi

if [ -f "${i}.3${gzext}" ]; then mv -f "${i}.3${gzext}" "${i}.4${gzext}"; fi

if [ -f "${i}.2${gzext}" ]; then mv -f "${i}.2${gzext}" "${i}.3${gzext}"; fi

if [ -f "${i}.1${gzext}" ]; then mv -f "${i}.1${gzext}" "${i}.2${gzext}"; fi

if [ -f "${i}.0${gzext}" ]; then mv -f "${i}.0${gzext}" "${i}.1${gzext}"; fi

if [ -f "${i}" ]; then mv -f "${i}" "${i}.0" && if [ -x /usr/bin/gzip ]; then gzip -9 "${i}.0"; fi; fi

touch "${i}" && chmod 640 "${i}" && chown root:admin "${i}"

fi

done

echo ""

Contents of /etc/periodic/monthly/200.accounting (checksum 3541581936)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

oldmask=$(umask)

umask 066

case "$monthly_accounting_enable" in

[Yy][Ee][Ss])

W=/var/log/wtmp

rc=0

remove=NO

if [ $rc -eq 0 ]

then

echo ""

echo "Doing login accounting:"

rc=$(ac -p | sort -nr -k 2 | tee /dev/stderr | wc -l)

[ $rc -gt 0 ] && rc=1

fi

[ $remove = YES ] && rm -f $W.0;;

*) rc=0;;

esac

umask $oldmask

exit $rc

Contents of /etc/periodic/monthly/999.local (checksum 2355967272)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

rc=0

for script in $monthly_local

do

echo ''

case "$script" in

/*)

if [ -f "$script" ]

then

echo "Running $script:"

sh $script || rc=3

else

echo "$script: No such file"

[ $rc -lt 2 ] && rc=2

fi;;

*)

echo "$script: Not an absolute path"

[ $rc -lt 2 ] && rc=2;;

esac

done

exit $rc

Contents of /etc/periodic/weekly/320.whatis (checksum 922328658)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

case "$weekly_whatis_enable" in

[Yy][Ee][Ss])

echo ""

echo "Rebuilding whatis database:"

MANPATH=`/usr/bin/manpath -q`

if [ $? = 0 ]

then

if [ -z "${MANPATH}" ]

then

echo "manpath failed to find any manpage directories"

rc=3

else

rc=0

/usr/libexec/makewhatis.local "${MANPATH}" || rc=3

if [ X"${man_locales}" != X ]

then

for i in ${man_locales}

do

LC_ALL=$i /usr/libexec/makewhatis.local -a \

-L "${MANPATH}" || rc=3

...and 9 more line(s)

Contents of /etc/periodic/weekly/999.local (checksum 3078968429)

if [ -r /etc/defaults/periodic.conf ]

then

. /etc/defaults/periodic.conf

source_periodic_confs

fi

rc=0

for script in $weekly_local

do

echo ''

case "$script" in

/*)

if [ -f "$script" ]

then

echo "Running $script:"

sh $script || rc=3

else

echo "$script: No such file"

[ $rc -lt 2 ] && rc=2

fi;;

*)

echo "$script: Not an absolute path"

[ $rc -lt 2 ] && rc=2;;

esac

done

exit $rc

Contents of /Library/Preferences/com.apple.security.appsandbox.plist (checksum 2599182411)

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>UnrestrictSpotlightContainerScope</key>

<true/>

</dict>

</plist>

Contents of /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (checksum 1199119104)

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Kernel Flags</key>

<string></string>

</dict>

</plist>

User login items

SteerMouse Manager

- /Applications/Utilities/SteerMouse.app/Contents/MacOS/SteerMouse Manager.app

Convert It

- /Applications/Convert It.app

SleepLess

- /Applications/SleepLess.app

smcFanControl

- /Applications/smcFanControl.app

BetterTouchTool

- /Applications/BetterTouchTool.app

Restricted files: 8

Elapsed time (s): 115