Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Yosemite 10.10.1 will not boot regulary

Hello everybody

This is my first request here. I have big problems since I did the 10.10.1 update on my iMac with Yosemite.

The issue is, when I start the machine, it hangs with a gray screen on boot sequence, before the login window comes up. Only in save mode, I can get access to my PC. An other thing is also wrong. In iPhoto, I can't edit pictures by iPhoto. Only a black placeholder instead of the picture appears. With preview I can edit the pictures.

Prior to this issue I had a boot camp partition with Win 8.1 (32 bit) on the HDD. But Win 8.1 would also not boot any more. The Win HDD was grayed out on choosing window.

After that, I was trying several things, I read on the web, but nothing was helpful! I also did a clean installation with only one partition, but nothing changed. I also made a reset for PRAM and the SMC and did a single user start a.s.o., but, the same thing happened as before!

At this moment, I work in save mode with the time machine backup I restored with several restrictions of course. I know, many people has similar problems. I wonder, why Apple does nothing against it!

I'm very thankful, if anybody could give me an idea to resolve my problems! Thanks in advance!

Supportix says Merry Christmas to all!

iMac, OS X Yosemite (10.10.1), iMac late 2007 / 4 GB ram

Posted on Dec 24, 2014 8:29 AM

Reply
18 replies

Dec 24, 2014 1:31 PM in response to Supportix

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.

Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.

2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.

There are ways to back up a computer that isn't fully functional. Ask if you need guidance.

3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.

You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.

In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.

You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.

Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.

4. Here's a summary of what you need to do, if you choose to proceed:

☞ Copy a line of text in this window to the Clipboard.

☞ Paste into the window of another application.

☞ Wait for the test to run. It usually takes a few minutes.

☞ Paste the results, which will have been copied automatically, back into a reply on this page.

The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.

5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.

6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.

7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.

Triple-click anywhere in the line of text below on this page to select it:

PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Fonts 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/^\/[AD]|\/Contents\/.+\/Contents\//&&/\/(Lib|usr).+\/(.+\.framework|Contents|Info\.plist|Resources|Versions)$/ { n++;sub(/\/Info\.plist$/,"");sub(/\/(Content|Resource|Version)s(\/.+)?/,"");print|"sort|uniq";} END { if(n<1100) print "/System/";} ' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /^\/[AD]/d;p;' 's/Pr.+n //p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' ' { gsub(/[()"]/,"",$3);if(!$3) $3="N/A";print $3;} ' ' 1,/\(P/d;/e: Pe/{ n;s/^.+://;b0'$'\n'' };/^ +Man.+: ./{ s/ \(0x.+\)//;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n//;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );S1() { printf kMDItemContentTypeTree=com.apple.$1'|sort';};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1'" {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA\(|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 bundle`" "`S1 mach-o-dylib`" `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} "`S2 ${p[35]}`" );N1=${#c2[@]};for j in {0..10};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files I/O\ errors 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Stylesheet );N3=${#l[@]};for i in {0..3};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 5 69 1;D13 5 54 30 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 24 22 29;B7 12;B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;C3 29;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+10)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 58 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 58;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-

Copy the selected text to the Clipboard by pressing the key combination command-C.

8. Launch the built-in Terminal application in any of the following ways:

☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.

9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter

exec bash

and press return. Then paste the script again.

10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.

If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.

11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line

[Process completed]

to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.

12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.

At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.

If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.

13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.

14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.

______________________________________________________________

Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Dec 25, 2014 6:54 AM in response to Eric Root

Hi Eric


Thanks for replaying my request. Here are my answers:

1. No, I can't start normally and the login window does not appear!

The boot sequence is like this:

1. The start sound comes normally

2. A gray screen comes followed by the Apple logo

3. The progress bar comes out an stops about 1/4

4. The gray screen goes dark and reappears

5. After about 3 minutes, the mouse pointer comes out of the left upper edge and is movable.

6. So it stays for hours and nothing else goes on...

7. All steps for recovering the iPhoto library as proposed I did without any success at all! 😕

Dec 25, 2014 8:01 AM in response to Linc Davis

Hi Linc

Thanks for replaying my request.

At this moment, the diagnostic tool is running in terminal as proposed. I logged in as normal user. The problem is the same ether I log in as admin or as normal user.

I interrupted the Ethernet connection in advance to prevent any uncontrollable issues 😁. When the diagnosis is done, I would like to sea, what result is coming out. Then, I think I will post it to You.

Thanks a lot! CU later!

Supportix

Dec 25, 2014 9:54 AM in response to Supportix

Hi Linc

My terminal did the diagnosis job well and here is the result of it. I hope, there is something that can help to resolve the problem!

Certain things seams to be strange to me.

Many thanks for Your help in advance!

Supportix

-------------------------------------------------------------------------------- -------------------------------------------------------------------------------- ----------

Start time: 18:17:37 12/25/14


Model Identifier: iMac7,1

System Version: OS X 10.10.1 (14B25)

Kernel Version: Darwin 14.0.0

Boot Mode: Safe

Time since boot: 2:52


Admin access: No


Memory



BANK 0/DIMM0:


Size: 2 GB

Speed: 667 MHz

Status: OK

Manufacturer: 0x7F98000000000000


BANK 1/DIMM1:


Size: 2 GB

Speed: 667 MHz

Status: OK

Manufacturer: 0x7F98000000000000


SATA


WDC WD3200AAJS-40RYA0


USB


USB-PS/2 Optical Mouse (Logitech Inc.)


Bluetooth


(Unknown)


FileVault: FileVault master keychain appears to be installed


Diagnostic reports


2014-12-17 Spotlight crash

2014-12-18 fontd crash x5

2014-12-20 fontd crash x3

2014-12-21 fontd crash x3

2014-12-23 fontd crash

2014-12-24 fontd crash x2

2014-12-25 fontd crash


Startup items


/Library/StartupItems/HP IO/HP IO

/Library/StartupItems/HP IO/StartupParameters.plist

/Library/StartupItems/rEFItBlesser/rEFItBlesser

/Library/StartupItems/rEFItBlesser/StartupParameters.plist


Contents of /Library/LaunchAgents/com.babylon.activation.plist (checksum 2909025831)


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Label</key>

<string>com.babylon.activation</string>

<key>MachServices</key>

<dict>

<key>com.babylon.activation</key>

<true/>

</dict>

<key>OnDemand</key>

<true/>

<key>RunAtLoad</key>

<true/>

<key>Disabled</key>

<false/>

<key>ProgramArguments</key>

<array>

<string>/Library/Application Support/Babylon/Babylon Activation.app/Contents/MacOS/Babylon Activation</string>

</array>

</dict>

</plist>


Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 593500864)


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Label</key>

<string>com.oracle.java.Java-Updater</string>

<key>ProgramArguments</key>

<array>

<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>

<string>-bgcheck</string>

</array>

<key>StandardErrorPath</key>

<string>/dev/null</string>

<key>StandardOutPath</key>

<string>/dev/null</string>

<key>StartCalendarInterval</key>

<dict>

<key>Hour</key>

<integer>17</integer>

<key>Minute</key>

<integer>54</integer>

<key>Weekday</key>

<integer>1</integer>

</dict>

</dict>


...and 1 more line(s)


Contents of /Library/LaunchAgents/com.teamviewer.teamviewer.plist (checksum 1602219417)


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Label</key>

<string>com.teamviewer.teamviewer</string>

<key>LimitLoadToSessionType</key>

<string>Aqua</string>

<key>ProgramArguments</key>

<array>

<string>/Applications/TeamViewer.app/Contents/MacOS/TeamViewer</string>

<string>-RunAsAgent</string>

<string>YES</string>

</array>

<key>WorkingDirectory</key>

<string>/Applications/TeamViewer.app/Contents/MacOS/</string>

<key>RunAtLoad</key>

<true/>

<key>KeepAlive</key>

<true/>

<key>Disabled</key>

<true/>

</dict>

</plist>


Contents of /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist (checksum 115043234)


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Label</key>

<string>com.teamviewer.desktop</string>

<key>LimitLoadToSessionType</key>

<array>

<string>LoginWindow</string>

<string>Aqua</string>

</array>

<key>ProgramArguments</key>

<array>

<string>/Applications/TeamViewer.app/Contents/Resources/TeamViewer_Desktop</str ing>

<string>-RunAsAgent</string>

<string>YES</string>

<string>-Module</string>

<string>Full</string>

</array>

<key>WorkingDirectory</key>

<string>/Applications/TeamViewer.app/Contents/Resources/</string>

<key>RunAtLoad</key>

<true/>

<key>KeepAlive</key>

<true/>


...and 4 more line(s)


Contents of /Library/LaunchAgents/net.culater.SIMBL.Agent.plist (checksum 1107421619)


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Label</key>

<string>net.culater.SIMBL.Agent</string>

<key>Program</key>

<string>/Library/ScriptingAdditions/SIMBL.osax/Contents/Resources/SIMBL Agent.app/Contents/MacOS/SIMBL Agent</string>

<key>RunAtLoad</key>

<false/>

<key>LimitLoadToSessionType</key>

<string>Aqua</string>

<key>OnDemand</key>

<false/>

</dict>

</plist>


Contents of /Library/LaunchDaemons/com.bombich.ccc.plist (checksum 3730953884)


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Disabled</key>

<false/>

<key>Label</key>

<string>com.bombich.ccc</string>

<key>OnDemand</key>

<true/>

<key>ProgramArguments</key>

<array>

<string>/Library/PrivilegedHelperTools/com.bombich.ccc</string>

</array>

<key>ServiceIPC</key>

<true/>

<key>Sockets</key>

<dict>

<key>MasterSocket</key>

<dict>

<key>SockFamily</key>

<string>Unix</string>

<key>SockPathMode</key>

<integer>438</integer>

<key>SockPathName</key>


...and 7 more line(s)


Contents of /Library/LaunchDaemons/com.ciscosystems.ciscoconnectupgrade.daemon.plist (checksum 1119507122)


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Disabled</key>

<true/>

<key>Label</key>

<string>com.ciscosystems.ciscoconnectupgrade.daemon</string>

<key>ProgramArguments</key>

<array>

<string>/Library/PrivilegedHelperTools/com.ciscosystems.ciscoconnectupgrade.dae mon</string>

</array>

<key>ServiceIPC</key>

<true/>

<key>Sockets</key>

<dict>

<key>MasterSocket</key>

<dict>

<key>SockFamily</key>

<string>Unix</string>

<key>SockPathMode</key>

<integer>438</integer>

<key>SockPathName</key>

<string>/var/run/com.ciscosystems.ciscoconnectupgrade.daemon.socket</string>

<key>SockType</key>


...and 5 more line(s)


Contents of /Library/LaunchDaemons/com.freemacsoft.appcleanerd.plist (checksum 1431319842)


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Label</key>

<string>com.freemacsoft.appcleanerd</string>

<key>OnDemand</key>

<false/>

<key>ProgramArguments</key>

<array>

<string>/Library/PrivilegedHelperTools/com.freemacsoft.appcleanerd</string>

</array>

<key>RunAtLoad</key>

<true/>

</dict>

</plist>


Contents of /Library/LaunchDaemons/com.prosofteng.DriveGenius.locum.plist (checksum 757526819)


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>EnvironmentVariables</key>

<dict/>

<key>GroupName</key>

<string>wheel</string>

<key>KeepAlive</key>

<false/>

<key>Label</key>

<string>com.prosofteng.DriveGenius.locum</string>

<key>MachServices</key>

<dict>

<key>com.prosofteng.DriveGenius.locum</key>

<true/>

</dict>

<key>ProgramArguments</key>

<array>

<string>/Library/PrivilegedHelperTools/com.prosofteng.DriveGenius.locum</string >

</array>

<key>RunAtLoad</key>

<false/>

<key>UserName</key>

<string>root</string>


...and 2 more line(s)


Contents of /Library/LaunchDaemons/com.radiosilenceapp.nke.PrivateEye.plist (checksum 2406212582)


<plist version="1.0">

<dict>

<key>Label</key>

<string>com.radiosilenceapp.nke.PrivateEye</string>

<key>KeepAlive</key>

<false/>

<key>RunAtLoad</key>

<true/>

<key>UserName</key>

<string>root</string>

<key>ProgramArguments</key>

<array>

<string>/sbin/kextload</string>

<string>/Applications/Private Eye.app/Contents/Resources/Private Eye.kext</string>

</array>

<key>StandardErrorPath</key>

<string>/dev/null</string>

<key>StandardOutPath</key>

<string>/dev/null</string>

</dict>

</plist>


Contents of /Library/LaunchDaemons/com.skype.skypeinstaller.plist (checksum 483910120)


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Label</key>

<string>com.skype.skypeinstaller</string>

<key>Program</key>

<string>/Library/PrivilegedHelperTools/com.skype.skypeinstaller</string>

<key>ProgramArguments</key>

<array>

<string>/Library/PrivilegedHelperTools/com.skype.skypeinstaller</string>

</array>

<key>Sockets</key>

<dict>

<key>com.skype.skypeinstaller.socket</key>

<dict>

<key>SockFamily</key>

<string>Unix</string>

<key>SockPathMode</key>

<integer>438</integer>

<key>SockPathName</key>

<string>/var/run/com.skype.skypeinstaller.socket</string>

<key>SockType</key>

<string>Stream</string>

</dict>


...and 3 more line(s)


Contents of /Library/LaunchDaemons/com.teamviewer.teamviewer_service.plist (checksum 2586050363)


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Disabled</key>

<true/>

<key>Label</key>

<string>com.teamviewer.service</string>

<key>KeepAlive</key>

<true/>

<key>ProgramArguments</key>

<array>

<string>/Applications/TeamViewer.app/Contents/MacOS/TeamViewer_Service</string>

<string>-Module</string>

<string>Full</string>

</array>

<key>RunAtLoad</key>

<true/>

<key>WorkingDirectory</key>

<string>/Applications/TeamViewer.app/Contents/MacOS</string>

</dict>

</plist>


Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist (checksum 1189540302)


<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>Label</key>

<string>com.apple.FolderActions.folders</string>

<key>Program</key>

<string>/usr/bin/osascript</string>

<key>ProgramArguments</key>

<array>

<string>osascript</string>

<string>-e</string>

<string>tell application "Folder Actions Dispatcher" to tick</string>

</array>

<key>WatchPaths</key>

<array/>

</dict>

</plist>


Spotlight: Indexing and searching disabled


Bad plists


Library/Containers/de.onlymac.homakut/Data/Library/Application Support/Homoeopathie akut/Daten/Homakut_Druckeinstellungen_xml.plist

Library/Preferences/jp.sunskysoft.DMGConverter5.plist

Library/Preferences/ooVoo.plist


Firewall: On


User login items


Alfred 2

- /Applications/Alfred 2.app


Prefetching: Off


Widgets


Wetter

Computer Status

Screenshot Plus


Restricted files: 587


Lockfiles: 136


Elapsed time (s): 692

Dec 25, 2014 11:39 AM in response to Supportix

A

Uninstall SIMBL as follows. Back up all data before making any changes.

Triple-click anywhere in the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:

/Library

In the Finder, select

Go Go to Folder...

from the menu bar, paste into the box that opens by pressing command-V, then press return. A folder will open. From that folder, delete the items listed below (some may be absent.) You may be prompted for your administrator login password.

Application Support/SIMBL

InputManagers/SIMBL

LaunchAgents/net.culater.SIMBL.Agent.plist

LaunchAgents/net.infinite-labs.SIMBLEnablerForSandboxedApps.plist

ScriptingAdditions/SIMBL.osax

Log out and log back in.

Make sure you never reinstall SIMBL. It’s likely to come bundled with another third-party system modfication that depends on it. If you want trouble-free computing, avoid software that makes miraculous changes to other software, especially built-in applications. The only real exception to that rule is Safari extensions, which are mostly safe, and are easy to get rid of when they don’t work. SIMBL and its dependents are not Safari extensions.

B

The following third-party system modifications serve no real purpose and should be removed:

AppCleaner

DriveGenius

Private Eye

rEFIt

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.

Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.

I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.

Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.

Back up all data before making any changes.

You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.

If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.

Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software.

C

If you can't boot normally after taking all the other steps suggested in this comment, remove "Cisco Connect," or refer to the developer for support.

D

Some of your user files (not system files) have incorrect permissions or are locked. This procedure will unlock those files and reset their ownership, permissions, and access controls to the default. If you've intentionally set special values for those attributes, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it, but you do need to follow the instructions below.

Back up all data before proceeding.

Step 1

If you have more than one user, and the one in question is not an administrator, then go to Step 2.

Enter the following command in the Terminal window in the same way as before (triple-click, copy, and paste):

sudo find ~ $TMPDIR.. -exec chflags -h nouchg,nouappnd,noschg,nosappnd {} + -exec chown -h $UID {} + -exec chmod +rw {} + -exec chmod -h -N {} + -type d -exec chmod -h +x {} + 2>&-

You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.

The command may take several minutes to run, depending on how many files you have. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.

Step 2 (optional)

Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.

Start up in Recovery mode. When the OS X Utilities screen appears, select

Utilities Terminal

from the menu bar. A Terminal window will open. In that window, type this:

resetp

Press the tab key. The partial command you typed will automatically be completed to this:

resetpassword

Press return. A Reset Password window will open. You’re not going to reset a password.

Select your startup volume ("Macintosh HD," unless you gave it a different name) if not already selected.

Select your username from the menu labeled Select the user account if not already selected.

Under Reset Home Directory Permissions and ACLs, click the Reset button

Select

Restart

from the menu bar.

E

Run the following command in the same way as before. It moves to the Trash "semaphore" files that have not been cleaned up by the system and may be interfering with normal operation. The files are empty; they contain no data. There will be no output this time.

find L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.??????? -exec mv {} .Trash/ \;

Log out or restart the computer.

F

The background process that manages fonts is crashing excessively.

Back up all data before proceeding.

Launch the Font Book application and validate all fonts. You must select the fonts in order to validate them. See the built-in help and this support article for instructions. If Font Book finds any issues, resolve them.

Start up in safe mode to rebuild the font caches. Restart as usual and test.

Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t start in safe mode. In that case, ask for instructions.

If you still have problems, then from the Font Book menu bar, select

FileRestore Standard Fonts...

You'll be prompted to confirm, and then to enter your administrator login password.

Also note that if you deactivate or remove any built-in fonts, for instance by using a third-party font manager, the system may become unstable.

G

Spotlight indexing has been disabled on the startup volume. If you added the volume to the Privacy list in the Spotlight preference pane, you should remove it. Otherwise, ask for instructions.

Dec 26, 2014 10:53 AM in response to Linc Davis

Hi Linc

Many thanks for Your replay and Your engagement! I learned my lesson! In the future, I will really no more install some system extensions other those, which will have a uninstall option as well!

Now, I was thinking about all this proposed uninstall processes. Fact is, I never can be sure, to have all program details purged without any rest of them!

So, I decided to do a clean re-installation of Yosemite. After that, I would get back my data from the Time Machine backup I have.

I will wait for Your answer to do so. I hope, You can agree with my idea. Do You think, this could resolve all problems I have?

Sorry, my English is not good enough. Please excuse me!

Supportix

Dec 31, 2014 8:22 AM in response to Linc Davis

I did the test and here is the report:

Start time: 16:39:17 12/31/14


Model Identifier: iMac7,1

System Version: OS X 10.9.5 (13F34)

Kernel Version: Darwin 13.4.0

Boot Mode: Safe

Time since boot: 11 minutes


Admin access: No


Memory



BANK 0/DIMM0:


Size: 2 GB

Speed: 667 MHz

Status: OK

Manufacturer: 0x7F98000000000000


BANK 1/DIMM1:


Size: 2 GB

Speed: 667 MHz

Status: OK

Manufacturer: 0x7F98000000000000


SATA


WDC WD3200AAJS-40RYA0


USB


USB-PS/2 Optical Mouse (Logitech Inc.)


Diagnostic reports


2014-12-30 Mail crash

2014-12-30 Maps crash x3


Log


Dec 29 21:40:17 com.apple.PackageKit.InstallStatus: Throttling respawn: Will start in 10 seconds

Dec 29 22:42:25 com.apple.storeagent: Exit timeout elapsed (1 seconds). Killing


Agents


com.apple.AirPortBaseStationAgent


Spotlight: Indexing and searching disabled


Font issues: 11


Firewall: On


DNS: 157.161.9.7 (static)


Restricted files: 1


Elapsed time (s): 158

---------------------------------------------------------

I wonder, why exists a boot.ini file when I do a HDD repair! Is it normal or is there a bug maybe in the MBR? Here is the report about it:


Verifying and repairing partition map for “WDC WD3200AAJS-40RYA0 Media”Checking prerequisites

Checking the partition list

Adjusting partition map to fit whole disk as required

Checking for an EFI system partition

Checking the EFI system partition’s size

Checking the EFI system partition’s file system

Checking all HFS data partition loader spaces

Checking booter partitionsChecking booter partition disk0s3

Checking file systemChecking Journaled HFS Plus volume.

Checking extents overflow file.

Checking catalog file.

Checking multi-linked files.

Checking catalog hierarchy.

Checking extended attributes file.

Checking volume bitmap.

Checking volume information.

The volume Recovery HD appears to be OK.

Volume repair complete.

Updating boot support partitions for the volume as required.

Reviewing boot support loaders

Checking Core Storage Physical Volume partitions


Updating Windows boot.ini files as required


The partition map appears to be OK


Thanks for Your help!

Yosemite 10.10.1 will not boot regulary

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.