Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

osx 10.10.2 crashing

I have just recently upgraded my MBP to OS X 10.10.2 and now the trash when set to empty will not be shrunk into the Dock nor will my MBP allow the Trash to pause or stop to complete some other taxing action which I require it to perform. Are there any things I can do to make OS X 10.10.2 pause or stop the Trash task without crashing it?

MacBook Pro, OS X Yosemite (10.10.2), Mid 2010 15"

Posted on Feb 1, 2015 11:48 AM

Reply
Question marked as Best reply

Posted on Feb 1, 2015 11:52 AM

You can't empty the Trash or move a file to the Trash

Visit The XLab FAQs and read the FAQ on solving Trash issues. You can also try using Trash It! 5.1 to fix the problem. Or you can try this:


Open the Terminal in the Utilities folder and paste the following at the prompt:


sudo rm -Rf ~/.Trash


Press RETURN. Enter your admin password when prompted. It will not echo to the screen. Press RETURN again.


(Should anyone tell you this is dangerous or unnecessary, please ignore the comment.)

Reinstalling OS X Without Erasing the Drive


Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.


Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.


When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.


Reinstall OS X: Select Reinstall OS X and click on the Continue button.


Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.


Also see:


Reinstall OS X Without Erasing the Drive


Choose the version you have installed now:


OS X Yosemite- Reinstall OS X


Note: You will need an active Internet connection. I suggest using Ethernet

if possible because it is three times faster than wireless.

2 replies
Question marked as Best reply

Feb 1, 2015 11:52 AM in response to rictoven

You can't empty the Trash or move a file to the Trash

Visit The XLab FAQs and read the FAQ on solving Trash issues. You can also try using Trash It! 5.1 to fix the problem. Or you can try this:


Open the Terminal in the Utilities folder and paste the following at the prompt:


sudo rm -Rf ~/.Trash


Press RETURN. Enter your admin password when prompted. It will not echo to the screen. Press RETURN again.


(Should anyone tell you this is dangerous or unnecessary, please ignore the comment.)

Reinstalling OS X Without Erasing the Drive


Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.


Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.


When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.


Reinstall OS X: Select Reinstall OS X and click on the Continue button.


Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.


Also see:


Reinstall OS X Without Erasing the Drive


Choose the version you have installed now:


OS X Yosemite- Reinstall OS X


Note: You will need an active Internet connection. I suggest using Ethernet

if possible because it is three times faster than wireless.

osx 10.10.2 crashing

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.