Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Boot up is much slower after 10.10.3 update

I just purchased my 2015 Macbook Pro (all upgrades maxed out) just a couple months ago.


I loved that it booted up most instantly and was super fast. Now after the 10.10.3 update, The boot up takes a significant amount of time longer. Instead of boot up taking about 30 seconds, it now takes 2-3 minutes.


Yeah I know, 1st world problems. But that's quite a significant increase in time from an update.


Anyone else encountering similar issues?

MacBook Pro with Retina display, OS X Yosemite (10.10.3), Early 2015

Posted on Apr 12, 2015 11:32 AM

Reply
Question marked as Best reply

Posted on Apr 12, 2015 11:35 AM

Select Startup disk. http://support.apple.com/kb/HT1310


Reset PRAM. http://support.apple.com/kb/PH18761?viewlocale=en_US&locale=en_US


Start up in Safe Mode. http://support.apple.com/kb/PH18760

6 replies

Apr 12, 2015 11:36 AM in response to mugbear

Reinstalling OS X Without Erasing the Drive


Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.


Reinstalling OS X Without Erasing the Drive


Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.


When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.


Reinstall OS X: Select Reinstall OS X and click on the Continue button.


Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.


Alternatively, see:


Reinstall OS X Without Erasing the Drive


Choose the version you have installed now:


OS X Yosemite- Reinstall OS X

OS X Mavericks- Reinstall OS X

OS X Mountain Lion- Reinstall OS X

OS X Lion- Reinstall Mac OS X


Note: You will need an active Internet connection. I suggest using Ethernet

if possible because it is three times faster than wireless.

Apr 13, 2015 6:02 AM in response to mugbear

You do not need to reinstall the OS.

Use these steps to choose a startup disk with Startup Manager:

  1. Turn on or restart your Mac.
  2. Immediately press and hold the Option key. After a few seconds, the Startup Manager appears. If you don't see the volume you want to use, wait a few moments for Startup Manager to finish scanning connected drives.
  3. Use your mouse or trackpad, or left and right arrow keys to select the volume you want to use.
  4. Double-click or press the Return key to start up your Mac from the volume you selected.


After you are logged in, select the default startup disk from System Preferences - How to choose a startup disk on your Mac - Apple Support

Boot up is much slower after 10.10.3 update

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.