Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Why does Time Machine not work over wifi but only via ethernet cable ?

Hi everyone,


It's been some time I have this problem now.


The first time I backed up my mac within Time Capsule with time machine, I chose to use the ethernet cable because the gigabit connection is much faster than the wifi for the first back up, but now, any time I want to update this back up, I need to connect the cable, cause "Time Machine can not connect to the Drive I picked" over wifi.


This is so annoying. Does anyone have a similar issue ?

Any solution ?


When I got this "error" I can use Utility Airport and get full access to the drive, even in finder. The only thing that doesn't work is TimeMachine connecting to the drive, even if it is detected by TimeMachine itself.


Thanks.


Riccardo

MacBook Pro (13-inch Mid 2010), OS X Yosemite (10.10), 500 GB HD

Posted on Apr 22, 2015 5:00 AM

Reply
Question marked as Best reply

Posted on Apr 22, 2015 8:01 AM

Typical Yosemite.


I suggest a full reconfigure of the TC.


Follow this list..


No files are deleted on the TC doing this although you might have to repoint your laptop to the backup.


Note.. even if TM does connect it will say it is going to do a new backup.. it is only when it starts that it discovers the backup exists and increments it.



Start from a factory reset. No files are lost on the hard disk doing this.

Factory reset universal

Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.

N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.


Setup the TC again.


Then redo the setup from the computer with Yosemite.

1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.

eg TCgen5 for basestation and and TCwifi wireless name.



If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.


2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.


3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.

Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.


4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.


5. Mount the TC disk in the computer manually.


In Finder, Go, Connect to server from the top menu,

Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).


You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.

However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.


6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.





There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.

You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.


Tell us how you go.



Someone posted a solution.. See this thread.


Macbook can't find Time Capsule anymore


Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.



Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.


http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

2 replies
Question marked as Best reply

Apr 22, 2015 8:01 AM in response to riiiic

Typical Yosemite.


I suggest a full reconfigure of the TC.


Follow this list..


No files are deleted on the TC doing this although you might have to repoint your laptop to the backup.


Note.. even if TM does connect it will say it is going to do a new backup.. it is only when it starts that it discovers the backup exists and increments it.



Start from a factory reset. No files are lost on the hard disk doing this.

Factory reset universal

Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.

N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.


Setup the TC again.


Then redo the setup from the computer with Yosemite.

1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.

eg TCgen5 for basestation and and TCwifi wireless name.



If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.


2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.


3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.

Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.


4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.


5. Mount the TC disk in the computer manually.


In Finder, Go, Connect to server from the top menu,

Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).


You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.

However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.


6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.





There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.

You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.


Tell us how you go.



Someone posted a solution.. See this thread.


Macbook can't find Time Capsule anymore


Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.



Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.


http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Apr 22, 2015 8:04 AM in response to LaPastenague

Actually, just a simple re-boot of the TC worked.

This was the second time I have to deal with this (every OS update I suppose though).

Last time I got to wait another 30 hours for backing all up....


By the way everything is fine now. I mean TC operating during sleeping and recharge time was nice!

Now it has been restored :-)

Why does Time Machine not work over wifi but only via ethernet cable ?

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.