Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

grafiprints Author

Level 1

0 points

Booting only in safe boot

Hello to everyone.

I have two imac's 27 at work, one of them has some problems. It had the smc ic changed and rewriten.

When i boot normally it give's the white screen with cursor. For now i can only work in safe boot.

I tried repairing the disk permissions, changed the drive's between imac's, reinstalled yosemite 2 times.

I cannot run AHT but tried ADS (even in loop) and the only error it showed was: SMC I/O FAILED (i've tried some 3rd party temperature control/check - it showed some glitches for 1 core of procesor, odt temperature and gpu proximity - a value of 128-129 degrees .... the rest are just normal)

Is there any bypass, or something to boot normally ?

Thanks in advance

I've copied a recent log from normal booting procedure:

29/05/15 19:47:09,000 bootlog[0]: BOOT_TIME 1432918029 0

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.AccountPolicyHelper" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.authd" sharing output destination "/var/log/asl" with ASL Module "com.apple.asl".

Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".

Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.authd" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.awdd" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.callhistory.asl.conf" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.cloudd" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.clouddocs" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.commerce.asl" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.CoreDuetAdmissionControl" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.eventmonitor" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.family.asl" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.ical" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.icloud.FindMyDevice" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.install" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.iokit.power" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.mail" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.MessageTracer" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.networking.symptoms" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.networking.symptoms" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.performance" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.secinitd" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.securityd" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.securityd" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.securityd" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.securityd" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.securityd" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.securityd" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 syslogd[17]: Configuration Notice:

ASL Module "com.apple.securityd" claims selected messages.

Those messages may not appear in standard system log files or in the ASL database.

29/05/15 19:47:29,000 kernel[0]: Longterm timer threshold: 1000 ms

29/05/15 19:47:29,000 kernel[0]: Darwin Kernel Version 14.1.0: Mon Dec 22 23:10:38 PST 2014; root:xnu-2782.10.72~2/RELEASE_X86_64

29/05/15 19:47:29,000 kernel[0]: vm_page_bootstrap: 893837 free pages and 146547 wired pages

29/05/15 19:47:29,000 kernel[0]: kext submap [0xffffff7f80a00000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000a00000]

29/05/15 19:47:29,000 kernel[0]: zone leak detection enabled

29/05/15 19:47:29,000 kernel[0]: "vm_compressor_mode" is 4

29/05/15 19:47:29,000 kernel[0]: multiq scheduler config: deep-drain 0, urgent first 1, depth limit 4, band limit 127, sanity check 0

29/05/15 19:47:29,000 kernel[0]: standard timeslicing quantum is 10000 us

29/05/15 19:47:29,000 kernel[0]: standard background quantum is 2500 us

29/05/15 19:47:29,000 kernel[0]: mig_table_max_displ = 13

29/05/15 19:47:29,000 kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled

29/05/15 19:47:29,000 kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled

29/05/15 19:47:29,000 kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled

29/05/15 19:47:29,000 kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled

29/05/15 19:47:29,000 kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=0 Disabled

29/05/15 19:47:29,000 kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=0 Disabled

29/05/15 19:47:29,000 kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=0 Disabled

29/05/15 19:47:29,000 kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=0 Disabled

29/05/15 19:47:29,000 kernel[0]: calling mpo_policy_init for TMSafetyNet

29/05/15 19:47:29,000 kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)

29/05/15 19:47:29,000 kernel[0]: calling mpo_policy_init for AMFI

29/05/15 19:47:29,000 kernel[0]: Security policy loaded: Apple Mobile File Integrity (AMFI)

29/05/15 19:47:29,000 kernel[0]: calling mpo_policy_init for Sandbox

29/05/15 19:47:29,000 kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)

29/05/15 19:47:29,000 kernel[0]: calling mpo_policy_init for Quarantine

29/05/15 19:47:29,000 kernel[0]: Security policy loaded: Quarantine policy (Quarantine)

29/05/15 19:47:29,000 kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993

29/05/15 19:47:29,000 kernel[0]: The Regents of the University of California. All rights reserved.

29/05/15 19:47:29,000 kernel[0]: MAC Framework successfully initialized

29/05/15 19:47:29,000 kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers

29/05/15 19:47:29,000 kernel[0]: AppleKeyStore starting (BUILT: Dec 22 2014 23:20:35)

29/05/15 19:47:29,000 kernel[0]: IOAPIC: Version 0x20 Vectors 64:87

29/05/15 19:47:29,000 kernel[0]: ACPI: sleep states S3 S4 S5

29/05/15 19:47:29,000 kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 1144

29/05/15 19:47:29,000 kernel[0]: AppleIntelCPUPowerManagement: (built 23:20:47 Dec 22 2014) initialization complete

29/05/15 19:47:29,000 kernel[0]: pci (build 23:16:47 Dec 22 2014), flags 0xe3000, pfm64 (36 cpu) 0xf80000000, 0x80000000

29/05/15 19:47:29,000 kernel[0]: [ PCI configuration begin ]

29/05/15 19:47:29,000 kernel[0]: [ PCI configuration end, bridges 1, devices 15 ]

29/05/15 19:47:29,000 kernel[0]: [ PCI configuration begin ]

29/05/15 19:47:29,000 kernel[0]: console relocated to 0xf80010000

29/05/15 19:47:29,000 kernel[0]: [ PCI configuration end, bridges 8, devices 35 ]

29/05/15 19:47:29,000 kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size

29/05/15 19:47:29,000 kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]

29/05/15 19:47:29,000 kernel[0]: rooting via boot-uuid from /chosen: B811F21F-89C1-37D9-8D21-0C2BB1DE8231

29/05/15 19:47:21,764 com.apple.xpc.launchd[1]: (com.apple.alf) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:29,000 kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>

29/05/15 19:47:29,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start

29/05/15 19:47:29,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start

29/05/15 19:47:29,000 kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded

29/05/15 19:47:29,000 kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded

29/05/15 19:47:29,000 kernel[0]: AppleIntelCPUPowerManagementClient: ready

29/05/15 19:47:29,000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID d8a25efffeedeca8; max speed s800.

29/05/15 19:47:29,000 kernel[0]: USBMSC Identifier (non-unique): 000000009833 0x5ac 0x8403 0x9833, 2

29/05/15 19:47:29,000 kernel[0]: USBMSC Identifier (non-unique): AA00000000015552 0x90c 0x1000 0x1100, 2

29/05/15 19:47:29,000 kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK1060GSC Media/IOGUIDPartitionScheme/osx@2

29/05/15 19:47:29,000 kernel[0]: BSD root: disk0s2, major 1, minor 3

29/05/15 19:47:29,000 kernel[0]: hfs: mounted osx on device root_device

29/05/15 19:47:29,000 kernel[0]: VM Swap Subsystem is ON

29/05/15 19:47:29,000 kernel[0]: ath_get_caps[4044] rx chainmask mismatch actual 3 sc_chainmak 0

29/05/15 19:47:29,000 kernel[0]: 2.984043: ath_get_caps[4019] tx chainmask mismatch actual 3 sc_chainmak 0

29/05/15 19:47:29,000 kernel[0]: 2.988159: Atheros: mac 128.2 phy 13.0 radio 12.0

29/05/15 19:47:29,000 kernel[0]: 2.988168: Use hw queue 0 for WME_AC_BE traffic

29/05/15 19:47:29,000 kernel[0]: 2.988174: Use hw queue 1 for WME_AC_BK traffic

29/05/15 19:47:29,000 kernel[0]: 2.988180: Use hw queue 2 for WME_AC_VI traffic

29/05/15 19:47:29,000 kernel[0]: 2.988186: Use hw queue 3 for WME_AC_VO traffic

29/05/15 19:47:29,000 kernel[0]: 2.988192: Use hw queue 8 for CAB traffic

29/05/15 19:47:29,000 kernel[0]: 2.988198: Use hw queue 9 for beacons

29/05/15 19:47:29,000 kernel[0]: 2.988279: wlan_vap_create : enter. devhandle=0x86c71718, opmode=IEEE80211_M_STA, flags=0x1

29/05/15 19:47:29,000 kernel[0]: 2.988316: wlan_vap_create : exit. devhandle=0x86c71718, opmode=IEEE80211_M_STA, flags=0x1.

29/05/15 19:47:29,000 kernel[0]: bpfAttach len 88 dlt 127

29/05/15 19:47:29,000 kernel[0]: bpfAttach len 124 dlt 192

29/05/15 19:47:29,000 kernel[0]: bpfAttach len 24 dlt 105

29/05/15 19:47:29,000 kernel[0]: 2.988357: ATH tunables:

29/05/15 19:47:29,000 kernel[0]: 2.988360: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]

29/05/15 19:47:21,765 com.apple.xpc.launchd[1]: (com.apple.audio.coreaudiod) Unknown key for array: seatbelt-profiles

29/05/15 19:47:21,765 com.apple.xpc.launchd[1]: (com.apple.auditd) The TimeOut key is no longer respected. It never did anything anyway.

29/05/15 19:47:28,837 hidd[68]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins

29/05/15 19:47:28,839 hidd[68]: ____IOHIDSessionScheduleAsync_block_invoke: thread_id=0x107e81000

29/05/15 19:47:28,839 hidd[68]: HID Session async scheduling initiated.

29/05/15 19:47:28,839 hidd[68]: HID Session async root queue running at priority 63 and schedule 2.

29/05/15 19:47:28,839 hidd[68]: HID Session async scheduling complete.

29/05/15 19:47:28,839 hidd[68]: Successfully opened the IOHIDSession

29/05/15 19:47:28,926 com.apple.SecurityServer[52]: Session 100000 created

29/05/15 19:47:21,765 com.apple.xpc.launchd[1]: (com.apple.autofsd) This service is defined to be constantly running and is inherently inefficient.

29/05/15 19:47:21,765 com.apple.xpc.launchd[1]: (com.apple.backupd-status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:21,765 com.apple.xpc.launchd[1]: (com.apple.backupd.status.xpc) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:21,766 com.apple.xpc.launchd[1]: (com.apple.bsd.dirhelper) The TimeOut key is no longer respected. It never did anything anyway.

29/05/15 19:47:21,766 com.apple.xpc.launchd[1]: (com.apple.cmio.IIDCVideoAssistant) ThrottleInterval set to zero. You're not that important. Ignoring.

29/05/15 19:47:21,766 com.apple.xpc.launchd[1]: (com.apple.cmio.AVCAssistant) ThrottleInterval set to zero. You're not that important. Ignoring.

29/05/15 19:47:21,766 com.apple.xpc.launchd[1]: (com.apple.cmio.VDCAssistant) ThrottleInterval set to zero. You're not that important. Ignoring.

29/05/15 19:47:21,766 com.apple.xpc.launchd[1]: (com.apple.configd) This service is defined to be constantly running and is inherently inefficient.

29/05/15 19:47:21,766 com.apple.xpc.launchd[1]: (com.apple.coreduetd) This service is defined to be constantly running and is inherently inefficient.

29/05/15 19:47:21,766 com.apple.xpc.launchd[1]: (com.apple.CoreRAID) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:21,766 com.apple.xpc.launchd[1]: (com.apple.CoreRAID) The ServiceIPC key is no longer respected. Please remove it.

29/05/15 19:47:21,767 com.apple.xpc.launchd[1]: (com.apple.coreservicesd) The HopefullyExitsLast key is no longer respected. Please remove it.

29/05/15 19:47:28,840 iconservicesagent[37]: iconservicesagent launched.

29/05/15 19:47:29,087 iconservicesagent[37]: Starting service with cache path: /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/com.apple.iconservices

29/05/15 19:47:30,263 watchdogd[30]: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

29/05/15 19:47:30,263 watchdogd[30]: [watchdog_daemon] @( wd_daemon_init) - could not initialize the hardware watchdog

29/05/15 19:47:30,263 watchdogd[30]: [watchdog_daemon] @( main) - cannot initialize the watchdog service

29/05/15 19:47:30,266 com.apple.xpc.launchd[1]: (com.apple.watchdogd) Service only ran for 8 seconds. Pushing respawn out by 2 seconds.

29/05/15 19:47:30,000 kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification

29/05/15 19:47:30,000 kernel[0]: IO80211Interface::efiNVRAMPublished():

29/05/15 19:47:30,000 kernel[0]: bpfAttach len 64 dlt 12

29/05/15 19:47:31,168 iconservicesd[36]: iconservicesd launched.

29/05/15 19:47:31,169 iconservicesd[36]: Cache path: /Library/Caches/com.apple.iconservices.store

29/05/15 19:47:31,172 com.apple.xpc.launchd[1]: (com.apple.DataDetectorsDynamicData) The JoinExistingSession key is only available to Application services.

29/05/15 19:47:31,179 com.apple.xpc.launchd[1]: (com.apple.FileSyncAgent.PHD.isRunning) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:31,179 com.apple.usbmuxd[51]: usbmuxd-344.5 on Dec 5 2014 at 17:02:22, running 64 bit

29/05/15 19:47:31,180 com.apple.xpc.launchd[1]: (com.apple.mbloginhelper.user) This key does not do anything: OnDemand

29/05/15 19:47:31,180 com.apple.xpc.launchd[1]: (com.apple.mbpluginhost.user) This key does not do anything: OnDemand

29/05/15 19:47:31,183 com.apple.xpc.launchd[1]: (com.apple.secd) This key does not do anything: OnDemand

29/05/15 19:47:31,183 com.apple.xpc.launchd[1]: (com.apple.secd) The ServiceIPC key is no longer respected. Please remove it.

29/05/15 19:47:31,184 com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand

29/05/15 19:47:31,185 com.apple.xpc.launchd[1]: (com.apple.TrustEvaluationAgent) This key does not do anything: OnDemand

29/05/15 19:47:31,223 opendirectoryd[45]: BUG in libdispatch: 14C109 - 2004 - 0x5

29/05/15 19:47:31,000 kernel[0]: bpfAttach len 124 dlt 192

29/05/15 19:47:31,000 kernel[0]: bpfAttach len 88 dlt 127

29/05/15 19:47:31,000 kernel[0]: bpfAttach len 24 dlt 105

29/05/15 19:47:31,000 kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).

29/05/15 19:47:31,000 kernel[0]: en0: channel changed to 1

29/05/15 19:47:31,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed

29/05/15 19:47:31,308 configd[25]: preference: no sharing preferences

29/05/15 19:47:32,000 kernel[0]: IOGraphics flags 0x43

29/05/15 19:47:32,000 kernel[0]: IOBluetoothUSBDFU::probe

29/05/15 19:47:32,000 kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8215 FirmwareVersion - 0x0208

29/05/15 19:47:32,000 kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x8000 ****

29/05/15 19:47:32,000 kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed (matched on Device) -- 0x8000 ****

29/05/15 19:47:32,000 kernel[0]: [IOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x8000

29/05/15 19:47:32,000 kernel[0]: [IOBluetoothHCIController][start] -- completed

29/05/15 19:47:32,000 kernel[0]: ** Device in slot: SLOT--1 **

29/05/15 19:47:32,000 kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService

29/05/15 19:47:32,000 kernel[0]: **** [IOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0x8b80 -- 0xc000 -- 0x8000 ****

29/05/15 19:47:32,321 watchdogd[113]: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

29/05/15 19:47:32,322 watchdogd[113]: [watchdog_daemon] @( wd_daemon_init) - could not initialize the hardware watchdog

29/05/15 19:47:32,322 watchdogd[113]: [watchdog_daemon] @( main) - cannot initialize the watchdog service

29/05/15 19:47:32,323 com.apple.xpc.launchd[1]: (com.apple.watchdogd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.

29/05/15 19:47:32,000 kernel[0]: Previous shutdown cause: 3

29/05/15 19:47:32,000 kernel[0]: DSMOS has arrived

29/05/15 19:47:32,969 configd[25]: dhcp_arp_router: en0 SSID unavailable

29/05/15 19:47:32,970 configd[25]: setting hostname to "Romans-iMac.local"

29/05/15 19:47:32,974 configd[25]: network changed.

29/05/15 19:47:34,980 com.apple.SecurityServer[52]: Entering service

29/05/15 19:47:35,157 loginwindow[64]: Login Window Application Started

29/05/15 19:47:35,210 digest-service[111]: label: default

29/05/15 19:47:35,210 digest-service[111]: dbname: od:/Local/Default

29/05/15 19:47:35,210 digest-service[111]: mkey_file: /var/db/krb5kdc/m-key

29/05/15 19:47:35,210 digest-service[111]: acl_file: /var/db/krb5kdc/kadmind.acl

29/05/15 19:47:35,226 UserEventAgent[16]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin

29/05/15 19:47:35,233 UserEventAgent[16]: Captive: CNPluginHandler en0: Inactive

29/05/15 19:47:35,251 com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.domain.system) Service "com.apple.ManagedClient.startup" tried to hijack endpoint "com.apple.ManagedClient.agent" from owner: com.apple.ManagedClient

29/05/15 19:47:35,262 thermald[22]: Waiting for OSTT support notification

29/05/15 19:47:35,265 WindowServer[118]: Server is starting up

29/05/15 19:47:35,400 locationd[54]: Logging binary sensor data to /var/folders/zz/zyxvpxvq6csfxvn_n00000sm00006d/C/locationdSensors.bin

29/05/15 19:47:35,403 locationd[54]: NBB-Could not get UDID for stable refill timing, falling back on random

29/05/15 19:47:35,412 locationd[54]: Location icon should now be in state 'Inactive'

29/05/15 19:47:35,583 secinitd[120]: UID[0]: cache loaded: /System/Library/Caches/com.apple.app-sandbox-cache.plist

29/05/15 19:47:35,584 secinitd[120]: ctkd[119]: unable to get root path for bundle of main executable: /System/Library/Frameworks/CryptoTokenKit.framework/ctkd

29/05/15 19:47:35,592 com.apple.xpc.launchd[1]: (com.apple.appkit.xpc.sandboxedServiceRunner) The JoinExistingSession key is only available to Application services.

29/05/15 19:47:35,633 digest-service[111]: digest-request: uid=0

29/05/15 19:47:35,000 kernel[0]: AtherosNewma40P2PInterface::init name <p2p0> role 1

29/05/15 19:47:35,000 kernel[0]: AtherosNewma40P2PInterface::init <p2p> role 1

29/05/15 19:47:35,676 airportd[29]: airportdProcessDLILEvent: en0 attached (up)

29/05/15 19:47:35,000 kernel[0]: 27.840516: performCountryCodeOperation: Not connected, scan in progress[0]

29/05/15 19:47:35,000 kernel[0]: en0: channel changed to 1

29/05/15 19:47:35,000 kernel[0]: 27.841155: setWOW_PARAMETERS:wowevents = 2(1)

29/05/15 19:47:36,301 digest-service[111]: digest-request: netr probe 0

29/05/15 19:47:36,301 digest-service[111]: digest-request: init request

29/05/15 19:47:36,308 digest-service[111]: digest-request: init return domain: BUILTIN server: ROMANS-IMAC indomain was: <NULL>

29/05/15 19:47:36,491 com.apple.xpc.launchd[1]: (com.apple.lakitu) The JoinExistingSession key is only available to Application services.

29/05/15 19:47:36,492 com.apple.xpc.launchd[1]: (com.apple.accounts.dom) The _DirtyJetsamMemoryLimit key is not available on this platform.

29/05/15 19:47:36,492 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.

29/05/15 19:47:36,584 mdmclient[40]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'

29/05/15 19:47:36,602 UserEventAgent[16]: nsurlsessiond_events plugin: adding token 1 for client softwareupdate_download_service

29/05/15 19:47:36,781 networkd[138]: networkd-411.1 pid 138

29/05/15 19:47:36,793 apsd[49]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)

29/05/15 19:47:36,905 systemkeychain[140]: done file: /var/run/systemkeychaincheck.done

29/05/15 19:47:37,070 discoveryd[48]: Basic Sockets GetProcessNameFromSocket() failed errno[57] err[-1]

29/05/15 19:47:37,070 discoveryd[48]: Basic Sockets Unknown(-1), errno 0 UDS FD=3

29/05/15 19:47:37,070 discoveryd[48]: Basic Sockets UDS FD=3 ERROR: failed to get effective user ID, errno 0

29/05/15 19:47:37,070 discoveryd[48]: Basic SleepProxy BSP Server Disabled. Metric = 3373

29/05/15 19:47:37,074 discoveryd[48]: AwdlD2d AwdlD2dInitialize: Initialized

29/05/15 19:47:37,076 discoveryd[48]: D2D_IPC: Loaded

29/05/15 19:47:37,083 discoveryd[48]: Basic WABServer NetResolverEvent no resolvers, resetting domains

29/05/15 19:47:37,083 discoveryd[48]: Basic DNSResolver etc/hosts file changed: Event 0x7f9550d059a0 Flushed /etc/hosts cache

29/05/15 19:47:37,083 discoveryd[48]: Basic RemoteControl com.apple.discoveryd Starting XPC Server

29/05/15 19:47:37,084 discoveryd[48]: Basic SleepProxy Could not get the primary interface

29/05/15 19:47:37,084 discoveryd[48]: Basic RemoteControl com.apple.discoveryd.dnsproxy Starting XPC Server

29/05/15 19:47:37,085 discoveryd[48]: Basic SleepProxy Sleep Proxy Server is not enabled

29/05/15 19:47:37,094 discoveryd_helper[153]: Basic RemoteControl com.apple.discoveryd_helper Starting XPC Server

29/05/15 19:47:37,094 discoveryd_helper[153]: Detailed RemoteControl com.apple.discoveryd_helper XPC connection 0x7f9df0500950: start (pid=48, <unknown> not root)

29/05/15 19:47:37,096 configd[25]: network changed.

29/05/15 19:47:37,000 kernel[0]: en0: 802.11d country code set to 'RO '.

29/05/15 19:47:37,000 kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140

29/05/15 19:47:37,000 kernel[0]: en0: BSSID changed to 10:fe:ed:66:cd:90

29/05/15 19:47:37,000 kernel[0]: en0: channel changed to 6

29/05/15 19:47:37,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed

29/05/15 19:47:37,000 kernel[0]: AirPort: Link Up on en0

29/05/15 19:47:37,000 kernel[0]: 29.425756: apple80211Request[10514] Unsupported ioctl 181

29/05/15 19:47:37,000 kernel[0]: 29.425768: apple80211Request[10514] Unsupported ioctl 181

29/05/15 19:47:37,000 kernel[0]: en0: BSSID changed to 10:fe:ed:66:cd:90

29/05/15 19:47:37,000 kernel[0]: en0: channel changed to 6

29/05/15 19:47:37,000 kernel[0]: en0::IO80211Interface::postMessage bssid changed

29/05/15 19:47:37,000 kernel[0]: AirPort: RSN handshake complete on en0

29/05/15 19:47:37,679 mdmclient[40]: ApplePushService: Timed out making blocking call, failed to perform call via XPC connection to 'com.apple.apsd'

29/05/15 19:47:38,202 apsd[49]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name

29/05/15 19:47:38,203 apsd[49]: Attempt to set push wake topics without dark wake enabled: ()

29/05/15 19:47:38,204 apsd[49]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name

29/05/15 19:47:38,204 apsd[49]: <APSConnectionServer: 0x7fa8c07292a0> Invalid mach port - Cleaning up this named port's topics. com.apple.askpermission.aps

29/05/15 19:47:38,622 mds[32]: (FMW.Normal:1402) FMW 0 0

29/05/15 19:47:40,456 stackshot[62]: Timed out waiting for IOKit to finish matching.

29/05/15 19:47:42,007 configd[25]: network changed: DNS* Proxy

29/05/15 19:47:42,008 discoveryd[48]: Basic SleepProxy Could not get the primary interface

29/05/15 19:47:42,011 UserEventAgent[16]: Captive: [CNInfoNetworkActive:1709] en0: SSID 'dan wireless' making interface primary (protected network)

29/05/15 19:47:42,011 UserEventAgent[16]: Captive: CNPluginHandler en0: Evaluating

29/05/15 19:47:42,016 UserEventAgent[16]: Captive: en0: Probing 'dan wireless'

29/05/15 19:47:42,245 blued[57]: Logging disabled

29/05/15 19:47:43,610 configd[25]: network changed: v4(en0!:192.168.0.103) DNS+ Proxy+ SMB

29/05/15 19:47:44,774 UserEventAgent[16]: Captive: CNPluginHandler en0: Authenticated

29/05/15 19:47:46,827 com.apple.xpc.launchd[1]: (com.apple.appkit.xpc.sandboxedServiceRunner) The JoinExistingSession key is only available to Application services.

29/05/15 19:47:46,827 com.apple.xpc.launchd[1]: (com.apple.DataDetectorsDynamicData) The JoinExistingSession key is only available to Application services.

29/05/15 19:47:46,830 com.apple.xpc.launchd[1]: (com.apple.FileSyncAgent.PHD.isRunning) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:46,831 com.apple.xpc.launchd[1]: (com.apple.mbloginhelper.user) This key does not do anything: OnDemand

29/05/15 19:47:46,831 com.apple.xpc.launchd[1]: (com.apple.mbpluginhost.user) This key does not do anything: OnDemand

29/05/15 19:47:46,833 com.apple.xpc.launchd[1]: (com.apple.secd) This key does not do anything: OnDemand

29/05/15 19:47:46,833 com.apple.xpc.launchd[1]: (com.apple.secd) The ServiceIPC key is no longer respected. Please remove it.

29/05/15 19:47:46,834 com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand

29/05/15 19:47:46,834 com.apple.xpc.launchd[1]: (com.apple.TrustEvaluationAgent) This key does not do anything: OnDemand

29/05/15 19:47:46,849 apsd[49]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)

29/05/15 19:47:47,200 sntp[158]: time set +0.288072 s

29/05/15 19:47:47,000 kernel[0]: BUG in process suhelperd[160]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)

29/05/15 19:47:49,933 lsregister[136]: LaunchServices: Begin database seeding

29/05/15 19:47:49,933 lsregister[136]: LaunchServices: Completed database seeding

29/05/15 19:47:50,000 kernel[0]: en0: BSSID changed to 10:fe:ed:66:cd:90

29/05/15 19:47:50,000 kernel[0]: en0: channel changed to 6

29/05/15 19:47:50,323 WindowServer[118]: Session 257 retained (2 references)

29/05/15 19:47:50,323 WindowServer[118]: Session 257 released (1 references)

29/05/15 19:47:50,345 WindowServer[118]: Session 257 retained (2 references)

29/05/15 19:47:50,347 WindowServer[118]: init_page_flip: page flip mode is on

29/05/15 19:47:51,644 WindowServer[118]: Found 26 modes for display 0x00000000 [26, 0]

29/05/15 19:47:51,666 WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]

29/05/15 19:47:51,668 WindowServer[118]: mux_initialize: Couldn't find any matches

29/05/15 19:47:51,709 WindowServer[118]: Found 26 modes for display 0x00000000 [26, 0]

29/05/15 19:47:51,713 WindowServer[118]: Found 1 modes for display 0x00000000 [1, 0]

29/05/15 19:47:51,737 WindowServer[118]: WSMachineUsesNewStyleMirroring: false

29/05/15 19:47:51,738 WindowServer[118]: Display 0x04272d40: GL mask 0x1; bounds (0, 0)[2560 x 1440], 26 modes available

Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cb5, S/N 0, Unit 0, Rotation 0

UUID 0x7eaceae36e58dbb8a1463bb9034010b9

29/05/15 19:47:51,738 WindowServer[118]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available

off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0

UUID 0xffffffffffffffffffffffffffffffff

29/05/15 19:47:51,739 WindowServer[118]: Set a breakpoint at CGSLogError to catch errors as they are logged.

29/05/15 19:47:51,739 WindowServer[118]: WSSetWindowTransform: Singular matrix

29/05/15 19:47:51,741 WindowServer[118]: Display 0x04272d40: GL mask 0x1; bounds (0, 0)[2560 x 1440], 26 modes available

Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9cb5, S/N 0, Unit 0, Rotation 0

UUID 0x7eaceae36e58dbb8a1463bb9034010b9

29/05/15 19:47:51,741 WindowServer[118]: Display 0x003f003d: GL mask 0x2; bounds (3584, 0)[1 x 1], 1 modes available

off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0

UUID 0xffffffffffffffffffffffffffffffff

29/05/15 19:47:51,742 WindowServer[118]: CGXPerformInitialDisplayConfiguration

29/05/15 19:47:51,742 WindowServer[118]: Display 0x04272d40: Unit 0; Vendor 0x610 Model 0x9cb5 S/N 0 Dimensions 23.50 x 13.23; online enabled built-in, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1

29/05/15 19:47:51,742 WindowServer[118]: Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1

29/05/15 19:47:51,875 com.apple.xpc.launchd[1]: (com.apple.FileSyncAgent.PHD.isRunning) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:51,875 com.apple.xpc.launchd[1]: (com.apple.mbloginhelper.user) This key does not do anything: OnDemand

29/05/15 19:47:51,876 com.apple.xpc.launchd[1]: (com.apple.mbpluginhost.user) This key does not do anything: OnDemand

29/05/15 19:47:51,878 com.apple.xpc.launchd[1]: (com.apple.secd) This key does not do anything: OnDemand

29/05/15 19:47:51,878 com.apple.xpc.launchd[1]: (com.apple.secd) The ServiceIPC key is no longer respected. Please remove it.

29/05/15 19:47:51,878 com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand

29/05/15 19:47:51,879 com.apple.xpc.launchd[1]: (com.apple.TrustEvaluationAgent) This key does not do anything: OnDemand

29/05/15 19:47:52,029 WindowServer[118]: GLCompositor: GL renderer id 0x01021a07, GL mask 0x00000003, accelerator 0x0000369b, unit 0, caps QEX|MIPMAP, vram 512 MB

29/05/15 19:47:52,029 WindowServer[118]: GLCompositor: GL renderer id 0x01021a07, GL mask 0x00000003, texture max 8192, viewport max {8192, 8192}, extensions NPOT|GLSL|FLOAT

29/05/15 19:47:52,029 WindowServer[118]: GLCompositor enabled for tile size [256 x 256]

29/05/15 19:47:52,029 WindowServer[118]: CGXGLInitMipMap: mip map mode is on

29/05/15 19:47:52,117 WindowServer[118]: CGXSetDisplayColorProfileAndTransfer: Display 0x04272d40: Unit 0; ColorProfile { 1920528485 }; TransferTable (256, 3)

29/05/15 19:47:52,166 com.apple.AmbientDisplayAgent[166]: AmbientDisplayAgent started

29/05/15 19:47:52,170 com.apple.AmbientDisplayAgent[166]: AMBD initializing devices

29/05/15 19:47:52,177 com.apple.AmbientDisplayAgent[166]: AMBD Agent: xpc connection became invalid during event handler

29/05/15 19:47:52,182 com.apple.xpc.launchd[1]: (com.apple.AssistiveControl.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:52,182 com.apple.xpc.launchd[1]: (com.apple.btsa) This key does not do anything: OnDemand

29/05/15 19:47:52,183 com.apple.xpc.launchd[1]: (com.apple.coreservices.lsactivity) Unknown key for Boolean: DrainMessagesAfterFailedInit

29/05/15 19:47:52,184 com.apple.xpc.launchd[1]: (com.apple.helpd) This key does not do anything: OnDemand

29/05/15 19:47:52,186 com.apple.xpc.launchd[1]: (com.apple.noticeboard.agent) This key does not do anything: OnDemand

29/05/15 19:47:52,188 com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand

29/05/15 19:47:52,189 com.apple.xpc.launchd[1]: (com.apple.inputswitcher.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:52,189 com.apple.xpc.launchd[1]: (com.apple.universalaccessd.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:52,189 com.apple.xpc.launchd[1]: (com.apple.universalaccesscontrol.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:52,189 com.apple.xpc.launchd[1]: (com.apple.UserEventAgent-LoginWindow) This service is defined to be constantly running and is inherently inefficient.

29/05/15 19:47:52,190 com.apple.xpc.launchd[1]: (com.apple.VoiceOver.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:52,191 com.apple.xpc.launchd[1]: (com.apple.ZoomWindow.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:52,330 com.apple.SecurityServer[52]: Session 100006 created

29/05/15 19:47:52,349 WindowServer[118]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fb552714b00) - enabling OpenGL

29/05/15 19:47:52,371 ntpd[130]: peer time.apple.com. @ 17.253.64.243

29/05/15 19:47:52,397 askpermissiond[167]: objc[167]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.

29/05/15 19:47:52,425 UserEventAgent[172]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin

29/05/15 19:47:52,440 UserEventAgent[172]: user agent networkd: built Nov 19 2014 21:39:47

29/05/15 19:47:52,456 askpermissiond[167]: StoreTransport: Resetting APS Connection using environment name production

29/05/15 19:47:52,461 apsd[49]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name

29/05/15 19:47:52,711 loginwindow[64]: The current system was not found in the list of machines requiring a switch to a black background

29/05/15 19:47:52,736 WiFiAgent[173]: securityd_message_with_reply_sync Failed to talk to secd after 4 attempts.

29/05/15 19:47:52,738 com.apple.xpc.launchd[1]: (com.apple.DataDetectorsDynamicData) The JoinExistingSession key is only available to Application services.

29/05/15 19:47:52,739 com.apple.xpc.launchd[1]: (com.apple.appkit.xpc.sandboxedServiceRunner) The JoinExistingSession key is only available to Application services.

29/05/15 19:47:56,863 com.apple.xpc.launchd[1]: (com.apple.FileSyncAgent.PHD.isRunning) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:47:56,864 com.apple.xpc.launchd[1]: (com.apple.mbloginhelper.user) This key does not do anything: OnDemand

29/05/15 19:47:56,864 com.apple.xpc.launchd[1]: (com.apple.mbpluginhost.user) This key does not do anything: OnDemand

29/05/15 19:47:56,867 com.apple.xpc.launchd[1]: (com.apple.secd) This key does not do anything: OnDemand

29/05/15 19:47:56,867 com.apple.xpc.launchd[1]: (com.apple.secd) The ServiceIPC key is no longer respected. Please remove it.

29/05/15 19:47:56,867 com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand

29/05/15 19:47:56,868 com.apple.xpc.launchd[1]: (com.apple.TrustEvaluationAgent) This key does not do anything: OnDemand

29/05/15 19:48:53,000 kernel[0]: considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild

29/05/15 19:49:00,842 warmd[31]: [warmctl_evt_timer_bc_activation_timeout:285] BC activation bcstop timer fired!

29/05/15 19:49:13,513 com.apple.kextcache[178]: Created prelinked kernel copy "/System/Library/PrelinkedKernels/prelinkedkernel"

29/05/15 19:49:13,513 com.apple.kextcache[178]: Created prelinked kernel "/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache"

29/05/15 19:49:13,513 com.apple.kextcache[178]: Created prelinked kernel using "/System/Library/Kernels/kernel"

29/05/15 19:49:15,346 mds[32]: (DiskStore.Error:1417) Unexpected file dev:738197506 storeDev:16777219 mode:416d hint:399536 oid:399536 ino:5 fsEvents:0 /home -- /home

29/05/15 19:49:15,346 mds[32]: (DiskStore.Error:1417) Unexpected file dev:738197505 storeDev:16777219 mode:416d hint:399535 oid:399535 ino:3 fsEvents:0 /net -- /net

29/05/15 19:49:17,234 com.apple.xpc.launchd[1]: (com.apple.FileSyncAgent.PHD.isRunning) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.

29/05/15 19:49:17,235 com.apple.xpc.launchd[1]: (com.apple.mbloginhelper.user) This key does not do anything: OnDemand

29/05/15 19:49:17,235 com.apple.xpc.launchd[1]: (com.apple.mbpluginhost.user) This key does not do anything: OnDemand

29/05/15 19:49:17,237 com.apple.xpc.launchd[1]: (com.apple.secd) This key does not do anything: OnDemand

29/05/15 19:49:17,237 com.apple.xpc.launchd[1]: (com.apple.secd) The ServiceIPC key is no longer respected. Please remove it.

29/05/15 19:49:17,238 com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand

29/05/15 19:49:17,239 com.apple.xpc.launchd[1]: (com.apple.TrustEvaluationAgent) This key does not do anything: OnDemand

29/05/15 19:49:19,466 lsregister[185]: LaunchServices: Begin database seeding

29/05/15 19:49:19,466 lsregister[185]: LaunchServices: Completed database seeding

29/05/15 19:49:29,018 com.apple.SecurityServer[52]: Session 100008 created

29/05/15 19:49:35,902 com.apple.SecurityServer[52]: Session 100009 created

29/05/15 19:50:21,000 bootlog[0]: BOOT_TIME 1432918221 0

Posted on May 29, 2015 10:44 AM

Reply

Best reply

Level 10

209,547 points

Posted on May 29, 2015 1:27 PM

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.

The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.

Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.

2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.

There are ways to back up a computer that isn't fully functional. Ask if you need guidance.

3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.

You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.

In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.

You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.

Another indication that the test is safe can be found in this thread, and this one, for example, where the comment in which I suggested it was recommended by one of the Apple Community Specialists, as explained here.

Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.

4. Here's a general summary of what you need to do, if you choose to proceed:

☞ Copy a particular line of text to the Clipboard.

☞ Paste into the window of another application.

☞ Wait for the test to run. It usually takes a few minutes.

☞ Paste the results, which will have been copied automatically, back into a reply on this page.

These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.

5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.

You may have started up in safe mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.

6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.

7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.

If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.

8. Launch the built-in Terminal application in any of the following ways:

☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.

9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter

exec bash

and press return. Then paste the script again.

10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.

If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.

11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:

[Process started]

Part 1 of 8 done at … sec
…
Part 8 of 8 done at … sec

The test results are on the Clipboard.

Please close this window.

[Process completed]

The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.

Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.

12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.

At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.

If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.

13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.

14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.

______________________________________________________________

Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

View in context

5 replies

Best reply

Level 10

209,547 points

May 29, 2015 1:27 PM in response to grafiprints

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.

The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.

Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.

2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.

There are ways to back up a computer that isn't fully functional. Ask if you need guidance.

3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.

You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.

In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.

You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.

Another indication that the test is safe can be found in this thread, and this one, for example, where the comment in which I suggested it was recommended by one of the Apple Community Specialists, as explained here.

Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.

4. Here's a general summary of what you need to do, if you choose to proceed:

☞ Copy a particular line of text to the Clipboard.

☞ Paste into the window of another application.

☞ Wait for the test to run. It usually takes a few minutes.

☞ Paste the results, which will have been copied automatically, back into a reply on this page.

These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.

5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.

You may have started up in safe mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.

6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.

7. Load this linked web page (on the website "Pastebin.") The title of the page is "Diagnostic Test." Below the title is a text box headed by three small icons. The one on the right represents a clipboard. Click that icon to select the text, then copy it to the Clipboard on your computer by pressing the key combination command-C.

If the text doesn't highlight when you click the icon, select it by triple-clicking anywhere inside the box. Don't select the whole page, just the text in the box.

8. Launch the built-in Terminal application in any of the following ways:

☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.

9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter

exec bash

and press return. Then paste the script again.

10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.

If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.

11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:

[Process started]

Part 1 of 8 done at … sec
…
Part 8 of 8 done at … sec

The test results are on the Clipboard.

Please close this window.

[Process completed]

The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.

Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.

12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.

At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.

If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.

13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.

14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.

______________________________________________________________

Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the referenced "Diagnostic Test"), I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Reply

grafiprints Author

Level 1

0 points

May 30, 2015 1:53 PM in response to Linc Davis

Hello, thanks for the quick reply and help.

Here is my results:

1 Start time: 23:44:49 05/30/15

2

3 Revision: 1320

4

5 Model Identifier: iMac11,3

6 System Version: OS X 10.10.2 (14C109)

7 Kernel Version: Darwin 14.1.0

8 Boot Mode: Safe

9 Time since boot: 14 minutes

10

11 UID: 501

12

13 SerialATA

14

15 TOSHIBA MK1060GSC

16

17 Bluetooth

18

19 Apple Magic Mouse

20

21 CPU usage (%)

22

23 WindowServer (UID 0): 53.4

24

25 Energy (lifetime)

26

27 WindowServer (UID 88): 59.20

28 Terminal (UID 501): 24.92

29 bash (UID 501): 20.61

30 com.apple.WebKit.WebContent (UID 501): 14.90

31

32 Spotlight: Indexing and searching disabled

33

34 Diagnostic reports

35

36 2015-05-29 Kernel panic

37 2015-05-29 fontd crash x4

38

39 HID errors: 1

40

41 Kernel log

42

43 May 29 18:54:24 considerRebuildOfPrelinkedKernel com.apple.kext.triggers triggered rebuild

44 May 29 19:15:08 AppleKeyStore: operation failed (pid: 289 sel: 15 ret: e00002ce)

45 May 29 19:30:58 considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild

46 May 29 19:48:53 considerRebuildOfPrelinkedKernel com.apple.kext.OSvKernDSPLib triggered rebuild

47 May 30 23:34:35 considerRebuildOfPrelinkedKernel com.apple.driver.IOBluetoothHIDDriver triggered rebuild

48 May 30 23:34:35 [IOBluetoothHIDDriver][getDevicePropertiesWL] Error retrieving device name

49 May 30 23:34:35 [IOBluetoothHIDDriver][getDevicePropertiesWL] Error retrieving device HID Descriptor.

50

51 System log

52

53 May 30 23:45:03 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

54 May 30 23:45:03 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not initialize the hardware watchdog

55 May 30 23:45:03 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

56 May 30 23:45:07 lockstat: Invalid connection: com.apple.coresymbolicationd

57 May 30 23:45:16 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

58 May 30 23:45:16 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not initialize the hardware watchdog

59 May 30 23:45:16 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

60 May 30 23:45:24 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

61 May 30 23:45:24 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not initialize the hardware watchdog

62 May 30 23:45:24 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

63 May 30 23:45:36 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

64 May 30 23:45:36 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not initialize the hardware watchdog

65 May 30 23:45:36 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

66 May 30 23:45:45 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

67 May 30 23:45:45 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not initialize the hardware watchdog

68 May 30 23:45:45 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

69 May 30 23:45:55 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

70 May 30 23:45:55 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not initialize the hardware watchdog

71 May 30 23:45:55 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

72 May 30 23:46:05 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

73 May 30 23:46:05 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not initialize the hardware watchdog

74 May 30 23:46:05 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

75 May 30 23:46:15 watchdogd: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)

76 May 30 23:46:15 watchdogd: [watchdog_daemon] @( wd_daemon_init) - could not initialize the hardware watchdog

77 May 30 23:46:15 watchdogd: [watchdog_daemon] @( main) - cannot initialize the watchdog service

78

79 launchd log

80

81 May 29 18:58:54 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.

82 May 29 18:59:07 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.

83 May 29 18:59:09 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.

84 May 29 19:14:07 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.

85 May 29 19:15:09 com.apple.iCloudHelper: GUI session does not exist for service to join. It will be spawned without access to the GUI.

86 May 29 19:15:14 com.apple.internetaccounts: GUI session does not exist for service to join. It will be spawned without access to the GUI.

87 May 29 20:24:19 com.apple.xpc.launchd.user.501.100004.Aqua: Could not read path: path = //com.apple.ManagedClientAgent.enrollagent, error = 2: No such file or directory

88

89 Console log

90

91 May 29 19:36:56 fontd: Failed to compile sql statement (77), "SELECT font_table.font_column, name_table.name_column FROM name_table, font_table WHERE font_table.font_column == name_table.font_column AND name_table.order_column == 0 AND (font_table.flags_column & 67) == 64;"

92 May 29 19:36:56 fontd: Failed to compile sql statement (78), "SELECT font_table.font_column, font_table.path_column, font_table.fragment_column FROM font_table WHERE (font_table.flags_column & 67) == 64;"

93 May 29 19:36:56 fontd: Failed to compile sql statement (79), "SELECT * FROM loc_names_table ORDER BY font_column;"

94 May 29 19:36:56 fontd: Failed to compile sql statement (82), "INSERT INTO version_table VALUES( ?, ? );"

95 May 29 19:36:56 fontd: Failed to compile sql statement (83), "INSERT OR ABORT INTO font_table VALUES( NULL, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ? );"

96 May 29 19:36:56 fontd: Failed to compile sql statement (84), "INSERT OR ABORT INTO dir_table VALUES( NULL, ?, ?, ?, ?, ? );"

97 May 29 19:36:56 fontd: Failed to compile sql statement (85), "INSERT OR ABORT INTO bookmarks_table VALUES( NULL, ?, ?, ? );"

98 May 29 19:36:56 fontd: Failed to compile sql statement (86), "DELETE FROM font_table WHERE font_column == ?;"

99 May 29 19:36:56 fontd: Failed to compile sql statement (87), "DELETE FROM dir_table WHERE dir_column == ?;"

100 May 29 19:36:56 fontd: Failed to compile sql statement (88), "UPDATE OR ABORT font_table SET flags_column == ( flags_column & ?) | ? WHERE font_column == ?;"

101 May 29 19:36:56 fontd: Failed to compile sql statement (89), "UPDATE OR ABORT dir_table SET flags_column == ( flags_column & ?) | ? WHERE dir_column == ?;"

102 May 29 19:36:56 fontd: Failed to compile sql statement (90), "INSERT INTO name_table VALUES( ?, ?, ? );"

103 May 29 19:36:56 fontd: Failed to compile sql statement (91), "INSERT INTO family_table VALUES( ?, ?, ? );"

104 May 29 19:36:56 fontd: Failed to compile sql statement (92), "INSERT INTO subfamily_table VALUES( ?, ?, ? );"

105 May 29 19:36:56 fontd: Failed to compile sql statement (93), "INSERT INTO fullname_table VALUES( ?, ?, ? );"

106 May 29 19:36:56 fontd: Failed to compile sql statement (94), "INSERT OR REPLACE INTO traits_table VALUES( ?, ?, ?, ?, ? );"

107 May 29 19:36:56 fontd: Failed to compile sql statement (95), "INSERT INTO loc_names_table VALUES( ?, ?, ?, ?, ?, ?, ?, ?, ? );"

108 May 29 19:36:56 fontd: Failed to compile sql statement (96), "INSERT OR REPLACE INTO charset_table VALUES( NULL, ? );"

109 May 29 19:36:56 fontd: Failed to compile sql statement (97), "INSERT INTO unicoderanges_table VALUES( ?, ?, ?, ?, ? );"

110 May 29 19:36:56 fontd: Failed to compile sql statement (98), "INSERT INTO language_table VALUES( ?, ?, ? );"

111 May 29 19:36:56 fontd: Failed to compile sql statement (99), "INSERT INTO varaxis_table VALUES( ?, ?, ?, ?, ?, ?, ? );"

112 May 29 19:36:56 fontd: Failed to compile sql statement (100), "INSERT INTO varinstance_table VALUES( ?, ?, ? );"

113 May 29 19:36:56 fontd: Failed to compile sql statement (101), "INSERT OR REPLACE INTO lwfn_table VALUES( ?, ? );"

114 May 29 19:36:56 fontd: Failed to create font store at path /var/folders/8r/yg00pm5d0zg0crl3gm0rmqw00000gn/C/com.apple.FontRegistry/fontreg istry.user, trying alternative

115 May 29 19:36:56 fontd: Failed to finalize sql statement (1)

116

117 System services loaded

118

119 com.apple.ucupdate.plist

120 - status: 1

121 com.apple.watchdogd

122

123 iCloud errors

124

125 bird 2

126 mbpluginhost 1

127

128 Continuity errors

129

130 sharingd 16

131

132 Restricted files: 2

133

134 Contents of Library/LaunchAgents/com.apple.macbuddy.icloudsetup.user.plist

135 - mod date: Jan 23 00:54:59 2015

136 - size (B): 582

137 - checksum: 2983863815

138

139 <?xml version="1.0" encoding="UTF-8"?>

140 <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

141 <plist version="1.0">

142 <dict>

143 <key>Label</key>

144 <string>com.apple.macbuddy.icloudsetup.user</string>

145 <key>LaunchOnlyOnce</key>

146 <true/>

147 <key>RunAtLoad</key>

148 <true/>

149 <key>ProgramArguments</key>

150 <array>

151 <string>/System/Library/CoreServices/Setup Assistant.app/Contents/Resources/mbicloudsetup</string>

152 <string>com.apple.macbuddy.icloudsetup.user</string>

153 </array>

154 <key>ProcessType</key>

155 <string>Adaptive</string>

156 </dict>

157 </plist>

158

159 Elapsed time (sec): 464

Reply

grafiprints Author

Level 1

0 points

May 30, 2015 3:25 PM in response to Linc Davis

Did another test after some verifying and repairing the permissions : http://pastebin.com/g3ytpFqQ

Thanks again

Reply

Level 10

209,547 points

May 31, 2015 3:49 PM in response to grafiprints

There is nothing in the configuration that would prevent booting. If you have reset the SMC and the PRAM, and reinstalled OS X, without effect, then you're dealing with a hardware fault.

Reply

grafiprints Author

Level 1

0 points

Jun 6, 2015 5:24 AM in response to Linc Davis

Hello, thanks for the help.

I've temporary deleted the kext's that wasn't necessary for safe boot (watched console), it booted normally and after that i've put back one kext by one until it crashed ... I've left with ATIRadeonX2000.kext, when i try to put it back the normal boot freezes. Now i have a working imac but no QE/CI. I had no errors from ADS under gpu test, all i can see wrong it's that the GPU die temp it's not showing under istats. Is there something to do with this kext or the GPU is dying?

Reply

Booting only in safe boot

Welcome to Apple Support Community

A forum where Apple customers help each other with their products. Get started with your Apple ID.

Learn more Sign up