I updated software on old G4 and now it will not start or reboot from disks. It was all good until I updated software. Same model as Any ideas? Chris PS I h

I updated software on old G4 and now it will not start or reboot from disks. It was all good until I updated software.

Same model as <http://www.everymac.com/systems/apple/powermac_g4/specs/powermac_g4_867_dp_mdd.h tml>


Any ideas?


Chris


PS I have been through resetting PRAM etc


Thanking you.

Posted on Jun 16, 2015 2:48 AM

Reply
16 replies

Jun 16, 2015 11:03 AM in response to BDAqua

When I turn the machine on it chimes then starts with a grey screen and apple symbol. From there I get the spinning grey wheel and it hangs from then on. I left it for a hour to no avail. I tried inserting a variety of original OS disks, holding down the C key to see if I could boot from those and the result was the same. I suspect the operating system I updated too is not compatible with the older processors.

Jun 16, 2015 11:10 AM in response to chrisclose

Hmmmm, a G4 can run no higher than 10.5.8, how exactly did you install this newer OS?


Tough without the Install disc, but some things to try...


Does it boot to Single User Mode, CMD+s keys at bootup, if so try...


/sbin/fsck -fy


Repeat until it shows no errors fixed.


(Space between fsck AND -fy important).


http://www.westwind.com/reference/os-x/commandline/single-user.html


What happens if anything at all?

Jun 16, 2015 2:46 PM in response to BDAqua

The computer had been dormant for some time but when I restarted it, all was fine. It connected to the wifi and I received an update window which I proceeded to do. Thanks for the tip of starting in single user mode, however I had forgotten Applejack installed so when I hold Command S Applejack begins. I typed applejack AUTO restart and it ran through its series of fixes but on restarting I am back to the grey screen and wheel. I tried a few OS disks but am still getting no further than the grey screen.

Jun 18, 2015 2:13 AM in response to BDAqua

HI,


These are all the disks I have, some may have come from my Power Mac.


Grey Disc

OSX Install Disc 1 - Mac Os Version 10.4.10, AHT Version 3A133, 2Z691-6089-A

OSX Install Disc 2 - A 2Z691-6113-A

OSX Software Install and Restore Disc - Mac Os Version 10.2.3, Z691-4161-A


Silver Disc

Apple Hardware Test, Power Mac G4 SW Version 2 691-4165-A



Black OSX Panther Discs

Install Disc 1, Version 10.3, Upgrade Disc 2Z691-4633-A

Install Disc 2, Version 10.3, Upgrade Disc 2Z691-4586-A

Install Disc 3, Version 10.3,Upgrade Disc 2Z691-4587-A



Black OSX Tiger Discs

Install DVD, Version 10.4 Upgrade Disc 2Z691-5305-A



Leopard

Install DVD, Version 10.5.1 Upgrade Disc 2Z691-6178-A



Snow Leopard

Install DVD, Version 10.6.3, 2Z691-6634-A

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

I updated software on old G4 and now it will not start or reboot from disks. It was all good until I updated software. Same model as Any ideas? Chris PS I h

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.