Hi,
I have the AKITIO THUNDER 2 QUAD , with currenlty 2 x 2TB SATA drives installed.
Both these drives are for video storage, so there is no OS installed on them.
I have an IMAC 27" 12,2 model ( which only has thunderbolt 1)
In My Imac I have 2 OPERATING SYSTEMS ( each a partition ) from a single 1TB Internal sata drive.
One partition is 10.6.8 (Snow Leopard), and The external Akitio Thunder 2 Quad drive always shows/mounts in this - so this is good.
BUT..
When I boot into the other Partition (which is 10.7.5 Lion - Just Installed and is a clean install) The drives don't show up or mount!
They also don't show up in DISK UTILITY!
But I can see them (sort of) in the system profile and CONNECTED!
Can you please let me know how I can RELIABLY have my AKITO THUNDER 2 QUAD mount in Lion 10.7.5
In my 10.6.8 System this is what I see in the SYSTEM PROFILE for Thunderbolt..
iMac:
Vendor Name: Apple, Inc.
Device Name: iMac
UID: 0x0001000A19EC0AC0
Firmware Version: 25.1
Port:
Status: No devices connected
Link Status: 7
Port Micro Firmware Version: 2.1.1
Port:
Status: Connected
Link Status: 2
Port Micro Firmware Version: 2.1.1
Cable Micro Firmware Version: Near: 1.0.16
AKiTiO Thunder 2 Quad:
Vendor Name: inXtron
Device Name: AKiTiO Thunder 2 Quad
Vendor ID: 0x41
Device ID: 0x237
Device Revision: 0x1
UID: 0x0041023714A024D0
Firmware Version: 24.1
Port:
Status: Connected
Link Status: 2
Port:
Status: No devices connected
Link Status: 7
In My 10.7.5 System Profile this is all I see..
iMac:
Vendor Name: Apple, Inc.
Device Name: iMac
UID: 0x0001000A19EC0AC0
Firmware Version: 25.1
Port:
Status: No devices connected
Link Status: 7
Port Micro Firmware Version: 2.1.1
Port:
Status: Connected
Link Status: 2
Port Micro Firmware Version: 2.1.1
Cable Micro Firmware Version: Near: 1.0.16
Thanks
Dave M
