bkkrocks

Q: Compressing from 4.94 to 4.5 GB

I've just finished a small project and then sent it to Compressor (highest quality) and the resulting file is 4.94 GB.     (Apple Devices; best quality).     It's just a tad too big to burn to a standard DVD and I wonder if you have suggestions for compressing it just a bit more so that the resulting file will fit on a DVD.    When I tried Apple Devices; most compatible, the resulting file was around 2 GB.

 

I'd like to tweak it just a bit so that the project will be small enough to burn to a DVD.

 

Any suggestions for reducing the eventual file size just enough to fit on a DVD with the minimal amount of effect on the quality of the video?

 

Thank you.

iMac (27-inch, Late 2013)

Posted on Jul 27, 2015 5:08 PM

Close

Q: Compressing from 4.94 to 4.5 GB

  • All replies
  • Helpful answers

  • by Russ H,

    Russ H Russ H Jul 27, 2015 8:04 PM in response to bkkrocks
    Level 7 (21,905 points)
    Quicktime
    Jul 27, 2015 8:04 PM in response to bkkrocks

    The DVD standard is MPEG2 with a bit rate <9 Mbps. You should use the DVD preset for that. If it is under 2 hours, you shouldn't have any problems fitting it on  a single layer disk, Otherwise, use dual layer.

     

    Russ

  • by bkkrocks,

    bkkrocks bkkrocks Jul 27, 2015 10:52 PM in response to Russ H
    Level 1 (0 points)
    Jul 27, 2015 10:52 PM in response to Russ H

    Yes, I should have mentioned that I tried the DVD preset and it came out to something like 3.5 GB.    However, even though the file size is bigger than the 2 GB "most compatible" option, it appears to me that the 2 gig version looks a tad better.      I'm not sure if I'm hallucinating since I've been looking at my computer screen for so long   ;-)

     

    In an ideal world, I'd like the file to be just small enough, for example, by 1 MB so that it can look as good as possible and still fit on a standard DVD.

     

    Naive question: does having a layer of "video" underneath another layer of video create a larger file?     Since I've set the opacity of all video clips to 100%, my guess is that it should NOT result in a larger file (like a Photoshop file that has multiple layers but is flattened before saving as, say, a .png file.

     

    Thanks for your suggestion; I'll definitely consider going that route.

  • by Russ H,Helpful

    Russ H Russ H Jul 28, 2015 4:27 AM in response to bkkrocks
    Level 7 (21,905 points)
    Quicktime
    Jul 28, 2015 4:27 AM in response to bkkrocks

    bkkrocks wrote:

         I'm not sure if I'm hallucinating since I've been looking at my computer screen for so long   ;-)

     

    A computer display won' show it correctly, Evaluated it plays from a DVD player to a TV screen.

     

    bkkrocks wrote:

     

     

    In an ideal world, I'd like the file to be just small enough, for example, by 1 MB so that it can look as good as possible and still fit on a standard DVD.

    You can increase the bit rate and see whether you notice the difference – and (importantly) whether the DVD player plays it smoothly. The higher you go the more like;y it is you will run into playability issues. So probably don't go too far above 7 Mbps (if the length of your video allows even that high of a rate.)

     

     

     

    Naive question: does having a layer of "video" underneath another layer of video create a larger file?     Since I've set the opacity of all video clips to 100%, my guess is that it should NOT result in a larger file (like a Photoshop file that has multiple layers but is flattened before saving as, say, a .png file.

    Your assumption is correct; it won't increase size.

     

    Russ

  • by bkkrocks,

    bkkrocks bkkrocks Jul 28, 2015 3:23 PM in response to Russ H
    Level 1 (0 points)
    Jul 28, 2015 3:23 PM in response to Russ H

    Thanks for the help; I'll give it a try   :-)

  • by bkkrocks,

    bkkrocks bkkrocks Aug 1, 2015 1:12 AM in response to Russ H
    Level 1 (0 points)
    Aug 1, 2015 1:12 AM in response to Russ H

    For what it's worth, I didn't know how to modify the presets and that's basically what I finally decided to do.     One preset is referred to as best quality.    That is what I wanted: a video with the best quality possible.     However, the problem was that the resulting file was just a tad too big to burn to a standard DVD.     So after trying this and that, I went back and modified the bit rate.     As I played with the bit rate, Compressor would show me the approximate file size.     After trial and error, I was able to create an .m4v file that is just small enough to burn but as big as possible without being too big (4.53 GB).

     

    I don't know if anyone else will face a similar situation but that's what I did and I like the quality of the resulting file.      (Note that using the preset "most compatible", the file size was 2 GB.)

     

    I hope this thread will help someone in the future; perhaps his/her choice will be different but I hope he/she will be aware of the options available  :-)

  • by Russ H,

    Russ H Russ H Aug 1, 2015 7:27 AM in response to bkkrocks
    Level 7 (21,905 points)
    Quicktime
    Aug 1, 2015 7:27 AM in response to bkkrocks

    Glad you were able to get the outcome you wanted.

     

    Out of curiosity, how did you burn the DVD?

     

    Russ