SMC, Power Button, Sensor failure

I got this 13" mid 2009 MBP that has a number of issues.

I can only get it to power up by holding down the Power button for around 5 seconds. wait for the SIL to start flashing. release the power button. And then it powers up. Runs super slow in OSX. Hibernate does not work. would not wake up. And more recently the Wifi card does not show up any more.

As i played around with it trying to reset the SMC & PRAM. i once got it into a state where it booted with Fans on full throttle. The battery would not show in OSX and Sleep/Wake still not working. BUT: It was running quick. REAL quick. I shut it down and it powered up with just a single press of the power button.

It was still running on battery. just not showing it in the status bar. so i was quite happy. i guess i could have slowed down the fans with SMCfanControl.

Unfortunately i decided to reset the SMC again and i could not bring it back to the other state ever since. Any idea what combination i must have hit to get it there?

i ran ASD OS 3S132 and here is the LOG :

[12/31/00 16:57:29] * TESTING STARTED - LOOP 1 *

[12/31/00 16:57:29] Current (IC0C) - CPU 0 Core - Load Side current (test #1) - Sensor Reads Within Operating Range

[16:57:29] - Check to ensure that sensor reads within operating range.

[16:57:29] Test Passed

[12/31/00 16:57:29] Current (IC0R) - CPU 0 High Side (test #1) - Sensor Reads Within Operating Range

[16:57:29] - Check to ensure that sensor reads within operating range.

[16:57:29] ERROR -- 2 [Sensor reading above alarm point] -- (6.59) TEST FAILED

[12/31/00 16:57:29] Current (ID0R) - DC In Rail 0 (test #1) - Sensor Reads Within Operating Range

[16:57:29] - Check to ensure that sensor reads within operating range.

[16:57:29] Test Passed

[12/31/00 16:57:29] Current (IN0C) - MCH core current 0 - Supply input (test #1) - Sensor Reads Within Operating Range

[16:57:29] - Check to ensure that sensor reads within operating range.

[16:57:29] Test Passed

[12/31/00 16:57:29] Current (IN1C) - MCH core current 1 (test #1) - Sensor Reads Within Operating Range

[16:57:30] - Check to ensure that sensor reads within operating range.

[16:57:30] ERROR -- 2 [Sensor reading above alarm point] -- (10.95) TEST FAILED

[12/31/00 16:57:30] Current (IP0R) - Battery - BMON Eng current - PBUS 0 Rail (test #1) - Sensor Reads Within Operating Range

[16:57:30] - Check to ensure that sensor reads within operating range.

[16:57:30] ERROR -- 2 [Sensor reading above alarm point] -- (10.30) TEST FAILED

[12/31/00 16:57:30] Temp (TB0T) - Battery Thermal Diode 0 temperature (test #1) - Sensor Reads Within Operating Range

[16:57:30] - Check to ensure that sensor reads within operating range.

[16:57:30] Test Passed

[12/31/00 16:57:30] Temp (TB1T) - Battery Thermal Diode 1 temperature (test #1) - Sensor Reads Within Operating Range

[16:57:30] - Check to ensure that sensor reads within operating range.

[16:57:30] Test Passed

[12/31/00 16:57:30] Temp (TB2T) - Battery Thermal Diode 2 temperature (test #1) - Sensor Reads Within Operating Range

[16:57:30] - Check to ensure that sensor reads within operating range.

[16:57:31] Test Passed

[12/31/00 16:57:31] Temp (TB3T) - Battery temperature (test #1) - Sensor Reads Within Operating Range

[16:57:31] - Check to ensure that sensor reads within operating range.

[16:57:31] Test Passed

[12/31/00 16:57:31] Temp (TC0D) - CPU 0 Die Temp (test #1) - Sensor Reads Within Operating Range

[16:57:31] - Check to ensure that sensor reads within operating range.

[16:57:31] Test Passed

[12/31/00 16:57:31] Temp (TC0P) - CPU proximity temperature (test #1) - Sensor Reads Within Operating Range

[16:57:31] - Check to ensure that sensor reads within operating range.

[16:57:31] Test Passed

[12/31/00 16:57:31] Temp (TN0D) - CPU Vcore voltage (test #1) - Sensor Reads Within Operating Range

[16:57:31] - Check to ensure that sensor reads within operating range.

[16:57:32] Test Passed

[12/31/00 16:57:32] Temp (TN0P) - MCP Proximity (test #1) - Sensor Reads Within Operating Range

[16:57:32] - Check to ensure that sensor reads within operating range.

[16:57:32] Test Passed

[12/31/00 16:57:32] Temp (Th1H) - Fin Stack (test #1) - Sensor Reads Within Operating Range

[16:57:32] - Check to ensure that sensor reads within operating range.

[16:57:32] Test Passed

[12/31/00 16:57:32] Temp (Ts0P) - Palm Rest Temp (test #1) - Sensor Reads Within Operating Range

[16:57:32] - Check to ensure that sensor reads within operating range.

[16:57:32] Test Passed

[12/31/00 16:57:32] Voltage (VC0C) - CPU 0 core voltage (test #1) - Sensor Reads Within Operating Range

[16:57:32] - Check to ensure that sensor reads within operating range.

[16:57:33] ERROR -- 2 [Sensor reading above alarm point] -- (3.30) TEST FAILED

[12/31/00 16:57:33] Voltage (VN0C) - MCH core voltage 0 (test #1) - Sensor Reads Within Operating Range

[16:57:33] - Check to ensure that sensor reads within operating range.

[16:57:33] ERROR -- 2 [Sensor reading above alarm point] -- (3.30) TEST FAILED

[12/31/00 16:57:33] Voltage (VP0R) - P-Bus voltage (test #1) - Sensor Reads Within Operating Range

[16:57:33] - Check to ensure that sensor reads within operating range.

[16:57:33] ERROR -- 3 [Sensor reading below low point] -- (3.75) TEST FAILED

[12/31/00 16:57:33] * 6 TEST(S) FAILED (Loop 1) [Elapsed time = 00:00:04] *

[12/31/00 16:57:33] * TESTING STARTED - LOOP 2 *

[12/31/00 16:57:33] Current (IC0C) - CPU 0 Core - Load Side current (test #1) - Sensor Reads Within Operating Range

[16:57:33] - Check to ensure that sensor reads within operating range.

[16:57:33] Test Passed

[12/31/00 16:57:33] Current (IC0R) - CPU 0 High Side (test #1) - Sensor Reads Within Operating Range

[16:57:33] - Check to ensure that sensor reads within operating range.

[16:57:34] ERROR -- 2 [Sensor reading above alarm point] -- (6.59) TEST FAILED

[12/31/00 16:57:34] Current (ID0R) - DC In Rail 0 (test #1) - Sensor Reads Within Operating Range

[16:57:34] - Check to ensure that sensor reads within operating range.

[16:57:34] Test Passed

[12/31/00 16:57:34] Current (IN0C) - MCH core current 0 - Supply input (test #1) - Sensor Reads Within Operating Range

[16:57:34] - Check to ensure that sensor reads within operating range.

[16:57:34] Test Passed

[12/31/00 16:57:34] Current (IN1C) - MCH core current 1 (test #1) - Sensor Reads Within Operating Range

[16:57:34] - Check to ensure that sensor reads within operating range.

[16:57:34] ERROR -- 2 [Sensor reading above alarm point] -- (10.95) TEST FAILED

[12/31/00 16:57:34] Current (IP0R) - Battery - BMON Eng current - PBUS 0 Rail (test #1) - Sensor Reads Within Operating Range

[16:57:34] - Check to ensure that sensor reads within operating range.

[16:57:34] ERROR -- 2 [Sensor reading above alarm point] -- (10.30) TEST FAILED

[12/31/00 16:57:35] Temp (TB0T) - Battery Thermal Diode 0 temperature (test #1) - Sensor Reads Within Operating Range

[16:57:35] - Check to ensure that sensor reads within operating range.

[16:57:35] Test Passed

[12/31/00 16:57:35] Temp (TB1T) - Battery Thermal Diode 1 temperature (test #1) - Sensor Reads Within Operating Range

[16:57:35] - Check to ensure that sensor reads within operating range.

[16:57:35] Test Passed

[12/31/00 16:57:35] Temp (TB2T) - Battery Thermal Diode 2 temperature (test #1) - Sensor Reads Within Operating Range

[16:57:35] - Check to ensure that sensor reads within operating range.

[16:57:35] Test Passed

[12/31/00 16:57:35] Temp (TB3T) - Battery temperature (test #1) - Sensor Reads Within Operating Range

[16:57:35] - Check to ensure that sensor reads within operating range.

[16:57:35] Test Passed

[12/31/00 16:57:35] Temp (TC0D) - CPU 0 Die Temp (test #1) - Sensor Reads Within Operating Range

[16:57:35] - Check to ensure that sensor reads within operating range.

[16:57:36] Test Passed

[12/31/00 16:57:36] Temp (TC0P) - CPU proximity temperature (test #1) - Sensor Reads Within Operating Range

[16:57:36] - Check to ensure that sensor reads within operating range.

[16:57:36] Test Passed

[12/31/00 16:57:36] Temp (TN0D) - CPU Vcore voltage (test #1) - Sensor Reads Within Operating Range

[16:57:36] - Check to ensure that sensor reads within operating range.

[16:57:36] Test Passed

[12/31/00 16:57:36] Temp (TN0P) - MCP Proximity (test #1) - Sensor Reads Within Operating Range

[16:57:36] - Check to ensure that sensor reads within operating range.

[16:57:36] Test Passed

[12/31/00 16:57:36] Temp (Th1H) - Fin Stack (test #1) - Sensor Reads Within Operating Range

[16:57:36] - Check to ensure that sensor reads within operating range.

[16:57:36] Test Passed

[12/31/00 16:57:36] Temp (Ts0P) - Palm Rest Temp (test #1) - Sensor Reads Within Operating Range

[16:57:36] - Check to ensure that sensor reads within operating range.

[16:57:37] Test Passed

[12/31/00 16:57:37] Voltage (VC0C) - CPU 0 core voltage (test #1) - Sensor Reads Within Operating Range

[16:57:37] - Check to ensure that sensor reads within operating range.

[16:57:37] ERROR -- 2 [Sensor reading above alarm point] -- (3.30) TEST FAILED

[12/31/00 16:57:37] Voltage (VN0C) - MCH core voltage 0 (test #1) - Sensor Reads Within Operating Range

[16:57:37] - Check to ensure that sensor reads within operating range.

[16:57:37] ERROR -- 2 [Sensor reading above alarm point] -- (3.30) TEST FAILED

[12/31/00 16:57:37] Voltage (VP0R) - P-Bus voltage (test #1) - Sensor Reads Within Operating Range

[16:57:37] - Check to ensure that sensor reads within operating range.

[16:57:37] ERROR -- 3 [Sensor reading below low point] -- (3.75) TEST FAILED

[12/31/00 16:57:37] * 12 TEST(S) FAILED (Loop 2) [Elapsed time = 00:00:08] *

[16:57:37]* 12 TEST(S) FAILED * [Elapsed time = 00:00:08]

Any ideas, or recommendations. highly appreciated!

Thanks