ICanHazG3

Q: Hard Drive Replacement G5 "Error Loading Operating System"

Hello,

I recently acquired an iMac G5

I get a DOS-like screen saying "Error Loading Operating System"

I just replaced the hard disk, It wouldn't boot from a CD/DVD before or after the replacement

Before I replaced the hard drive I got a blank grey screen, nothing else (even after pressing Opt, C, etc.)

Now I have the same problem but after ≈5min the screen goes to a DOS-like screen saying "Error Loading Operating System" in a Raster font on a black background

 

I already checked the logic board including capacitors and other peripherals

 

I Have no way of getting the Model#

Screen Size 17"

RAM 2GB

SuperDrive

Original Disk 160GB

iSight

 

Thanks Ahead, Tyler

iMac, G5

Posted on Oct 2, 2015 5:39 PM

Close

Q: Hard Drive Replacement G5 "Error Loading Operating System"

  • All replies
  • Helpful answers

  • by a brody,Apple recommended

    a brody a brody Oct 18, 2015 2:12 PM in response to ICanHazG3
    Level 9 (66,781 points)
    Classic Mac OS
    Oct 18, 2015 2:12 PM in response to ICanHazG3

    The model# is not important.  The EMC# off the foot will tell us what you have:

     

    Is my iMac an iMac PPC or Intel?

     

    Assuming you are correct and it is a PPC G5, you'll need to format the hard drive Apple Partition Map.  The GUID, and FAT32, and NTFS formats most commonly found on new hard drives will not work with PPC Macs.  This article explains more in depth about formatting:

     

    https://discussions.apple.com/docs/DOC-3003

     

    Furthermore, do not post the serial number here, but use it to identify your Mac further:

     

    https://discussions.apple.com/docs/DOC-6413

     

    Note the dates at the end to determine which retail releases you can use, 10.3, 10.3.2, 10.3.5, 10.4, 10.4.3, 10.4.6, 10.5.

    If you got the original discs, that will help, as that's the only way to load Classic on your Mac.