Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Keep getting "an unexpected error occurred" when Airport Utility tries to examine my A1264 N Airport Express. Using Airport Utility 6.3.6 and El Capitan.

Keep getting "an unexpected error occurred" when Airport Utility tries to examine my A1264 N Airport Express. Using Airport Utility 6.3.6 and El Capitan.

MacBook Pro with Retina display, OS X El Capitan (10.11)

Posted on Oct 5, 2015 1:35 PM

Reply
11 replies

Oct 5, 2015 1:40 PM in response to Townewolf

More confirmation that the bugs in Yosemite have continued with El Capitan.


On your Mac......


Open System Preferences (gear icon on the dock)

Open Network

Click on WiFi to highlight it

Click Advanced at the lower right of the window

Click the TCP/IP tab

Make sure that the setting for Configure iPv6 is set for Link Local Only

Click OK

Click Apply in the next window


Then, click Ethernet to highlight it in the same Network window above and repeat the same steps as above


Restart your Mac


Power off the AirPort Express

What a minute

Power the Express back up


Try AirPort Utility again and report on your results

Oct 5, 2015 2:00 PM in response to Townewolf

Power off the entire network......all devices.....in any order that you want

Wait a minute

Start the modem first and let it run 5 minutes

Then start the next device connected to the modem and let it run a full minute

Keep starting devices one at a time about a minute apart until the network is back up


If the Express appears, iPv6 needs to be set correctly on the Express as well.


If it doesn't, the Express will need to be reset back to default settings and then set up again.


Lots of issues like this over on the El Capitan support forum as well.

Oct 5, 2015 2:52 PM in response to Bob Timmons

Bob, it is definitely an El Capitan issue. I reset ALL network connections and items to "automatic" from "local-link only". I then grabbed my daughter's macbook air, which is still running Yosemite, and ran Airport Utility. It connected right up to the new Express and was I able to configure it from there. Once I did that, it appeared on the Airport Utility on my machine; on the network and ready to go.

Keep getting "an unexpected error occurred" when Airport Utility tries to examine my A1264 N Airport Express. Using Airport Utility 6.3.6 and El Capitan.

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.