Magic Mouse 2 driver

You can use https://github.com/timsutton/brigadier to download BC drivers. I used Model Identifier iMac 17,1 (Retina iMac 5K 2015) to download

<ProductManufacturer>Apple Inc.</ProductManufacturer>

<ProductVersion>6.0.6237</ProductVersion>

<ProductCode>{FCFFE6B6-BAE8-490E-88D0-097A9DA1C43D}</ProductCode>

This has the TrackPadPro installer executable.

Thanks for your reply.

I did install that and other 6.0 drivers, but Bluetooth is not detecting Magic Trackpad 2.

It says it's 'ready to pair', but once I start pairing it the error message comes shortly right after as per attached.

I already hooked up Magic Trackpad 1 and Magic Mouse 1 fine but not Magic Trackpad 2 (I don't have Magic Mouse 2).

What could be the reason?

Thanks.

When I download the BC package manually for a 2015 iMac 5K, I get

./brigadier -m iMac17,1 -o Bootcamp-iMac17.1

Using Mac model: iMac17,1.

Model supported in package distribution file at http://swcdn.apple.com/content/downloads/08/53/031-13951/0azyj3l0sl4tkq4p874eibr rbokomwt6qw/031-13951.English.dist.

Distribution 031-13951 supports the following models: iMac16,1, iMac16,2, iMac17,1.

Making directory Bootcamp-iMac17.1/BootCamp-031-13951..

Fetching Boot Camp product at URL http://swcdn.apple.com/content/downloads/08/53/031-13951/0azyj3l0sl4tkq4p874eibr rbokomwt6qw/BootCampESD.pkg.

100.0% 673644544 / 673639138 bytes

Expanding flat package...

Extracting Payload...

Extracted to Bootcamp-iMac17.1/BootCamp-031-13951/WindowsSupport.dmg.

Done.

Which model of iMac 5k do you have - Identify the model of your iMac - Apple Support ?

It is a Python script, run from the Terminal. Use the link to download it. You can run it as follows using OSX Terminal.

MyName-rmbp:brigadier-master MyName$ ./brigadier -h

Usage: brigadier [options]

Options:

-h, --help show this help message and exit

-m MODEL, --model=MODEL

System model identifier to use (otherwise this

machine's model is used). This can be specified

multiple times to download multiple models in a single

run.

-i, --install After the installer is downloaded, perform the install

automatically. Can be used on Windows only.

-o OUTPUT_DIR, --output-dir=OUTPUT_DIR

Base path where the installer files will be extracted

into a folder named after the product, ie.

'BootCamp-041-1234'. Uses the current directory if

this option is omitted.

-k, --keep-files Keep the files that were downloaded/extracted. Useful

only with the '--install' option on Windows.

-p PRODUCT_ID, --product-id=PRODUCT_ID

Specify an exact product ID to download (ie.

'031-0787'), currently useful only for cases where a

model has multiple BootCamp ESDs available and is not

downloading the desired version according to the post

date.

MyName-rMBP:brigadier-master MyName$ ./brigadier -m MacBook8,1 -o Bootcamp-MacBook8,1

Output directory Bootcamp-MacBook8,1 that was specified doesn't exist!

MyName-rMBP:brigadier-master MyName$ mkdir Bootcamp-MacBook8.1

MyName-rMBP:brigadier-master MyName$ ./brigadier -m MacBook8,1 -o Bootcamp-MacBook8.1

Using Mac model: MacBook8,1.

Model supported in package distribution file at http://swcdn.apple.com/content/downloads/28/26/031-24514/qx7ph7k6mewtcf4eyhxmiil gc7r2ikjgud/031-24514.English.dist.

Distribution 031-24514 supports the following models: MacBook8,1, MacBookAir5,1, MacBookAir5,2, MacBookAir6,1, MacBookAir6,2, MacBookAir7,1, MacBookAir7,2, MacBookPro9,1, MacBookPro9,2, MacBookPro11,1, MacBookPro11,2, MacBookPro11,3, MacBookPro11,4, MacBookPro11,5, MacBookPro12,1, MacPro6,1, Macmini6,1, Macmini6,2, Macmini7,1, iMac13,1, iMac13,2, iMac13,3, iMac14,1, iMac14,2, iMac14,3, iMac14,4, iMac15,1.

Making directory Bootcamp-MacBook8.1/BootCamp-031-24514..

Fetching Boot Camp product at URL http://swcdn.apple.com/content/downloads/28/26/031-24514/qx7ph7k6mewtcf4eyhxmiil gc7r2ikjgud/BootCampESD.pkg.

100.0% 1633591296 / 1633586781 bytes

Expanding flat package...

Extracting Payload...

Extracted to Bootcamp-MacBook8.1/BootCamp-031-24514/WindowsSupport.dmg.

Done.

MyName-rMBP:brigadier-master MyName$ cd Bootcamp-MacBook8.1/

MyName-rMBP:Bootcamp-MacBook8.1 MyName$ ls -lt

total 0

drwxr-xr-x 3 MyName staff 102 Aug 13 11:57 BootCamp-031-24514

MyName-rMBP:Bootcamp-MacBook8.1 MyName$ cd BootCamp-031-24514/

MyName-rMBP:BootCamp-031-24514 MyName$ ls -lt

total 3188544

-rw-r--r-- 1 MyName staff 1632530665 Aug 12 00:59 WindowsSupport.dmg

MyName-rMBP:BootCamp-031-24514 MyName$ pwd

/Users/MyName/Documents/brigadier-master/Bootcamp-MacBook8.1/BootCamp-031-24514

MyName-rMBP:BootCamp-031-24514 MyName$ ls

WindowsSupport.dmg

MyName-rMBP:BootCamp-031-24514 MyName$ openssl md5 WindowsSupport.dmg

MD5(WindowsSupport.dmg)= a3d3e4f4a950fe6b47c4cb55f7cd7e02

Can you download BC6 drivers using BC Assistant and run the setup.exe in Bootcamp folder? It will repair other drivers as well as the Mouse 2 driver. BT settings for the MM vs MM2 should also be checked.

Had the same problem.

What I did was: logon to OSX, go to finder. There's the extra installation drive that Bootcamp has made (OSXRESERVED or something like that).

When you browse that drive there's a bootcamp folder that contains around 10 executables. One of them is AppleWirelessMouse64.exe

I could not figure out how to copy this file to an external disk, so I ended up sharing it to myself through email ><

Anyways, once you install that in Windows 10 you immediately see a mouse icon overlay on screen and your scrolling works!

Did get a message after installing, but I just clocked: this software is working OK (or something to that effect).

sent you a message on FB (probably in your "other" folder) with a link to the drivers.

OSX Reserved is used for temporary staging of files by BCA in preparation of an EFI installation of Windows. It is the equivalent of the $WinPEDriver$ and Bootcamp folder (with setup.exe) on 2012-2014 USB Installers.

I Know, but it seems there are different versions of the driver. I tried a few versions before I managed to get the one I sent you from the OS X disk.

And I am talking about the Magic Mouse 2, just got the new iMac myself, and got scrolling to work With Windows 10.

can you check your inbox on Facebook?

i Sent you a link to the drivers I uploaded yesterday 🙂

may have ended up in your "other" inbox.

edit:

Hi, saw your post on Apple communities about the mouse driver problem.Added them here:

https://www.wetransfer.com/downloads/06b24516019762980b4f158c40eacea220151016204 502/bbff709fef899659c754a708c18a1b6f20151016204502/a67f4a

This is from a new version of BC6 packages.

<ProductManufacturer>Apple Inc.</ProductManufacturer>

<ProductVersion>6.0.6237</ProductVersion>

<ProductCode>{FCFFE6B6-BAE8-490E-88D0-097A9DA1C43D}</ProductCode>

dated 12 Oct 2015.

When I use Boot Camp Assistant on iMac 5K ( late 2014, i7, ElCapitan 10.11) for downloading newest Boot Camp drivers, it downloads older version 6133 wit non working Magic Mouse 2 driver instead of version 6237. I don't understand it.

Thank you, Matthijst, that did it!

At first it didn't work. So what I did was I went into device manager, uninstalled "Apple Broadcom Built-in Bluetooth," chose the option to delete the drivers. I then went into the original bootcamp $WinPEDriver$ folder and reinstalled the AppleBluetoothBroadcom64 application. Once that reloaded, it rediscovered my mouse and it started working.

I get the same problem with a MacBook Pro 13 Early 2013 running OS X 10.10.5 - do you need to be running 10.11.1 in order to download the latest BootCamp image? So to download version 6.0.6237 vs 6.0.6133 which is what I am getting?

@Loner T how would you recommend that I get the latest drivers which will hopefully work on my Win10 (build 10586.14) PC? I've tried the BootCamp 6.0.6133 version of AppleWirelessMouse64.exe and that doesn't seem to give me scrolling..