Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Not turning on

Everything was working fine , suddenly it turned off and when I press the power button its not working ,infact nothing is working except the charger.I tried resetting the smc also it didn't work .plz help

MacBook Air, OS X Mavericks (10.9.1), Nothing works except charger

Posted on Nov 18, 2015 6:35 AM

Reply
1 reply

Nov 19, 2015 12:34 PM in response to Rajeshfrombellary

Howdy Rajesh,


It sounds like your computer isn't turning on at all, not even after resetting the SMC. From what you describe it's seeming like you may need service for your product, but before you do that, I would recommend you take a look at the following article about that kind of an issue:


If your Mac won‘t turn on

https://support.apple.com/en-us/HT204267

Rule out display issues

First, rule out the display as the source of the issue. To be sure you're not having a display issue, press your computer's power button. If your computer has power but doesn't have any video:

  • You may hear a startup chime.
  • You may hear fan or drive noise.
  • You may see a light from the Sleep LED (if your Mac has one).
  • Pressing the Caps Lock key on the keyboard causes it to light.

If any of these things happen, see Troubleshooting: My computer has no video. Otherwise, continue with this article.

Power issues

After ruling out display issues, and if your computer won't turn on, try each of these steps.

  1. Verify that you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
  2. If the wall outlet is working and you continue to have no power, try another power cord or adapter if available. If it works, you might need a replacement cord or adapter. If you're using a Mac notebook, see Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    If you're using a Mac notebook, leave the power adapter connected long enough to provide an adequate charge to the battery.
  3. Disconnect all accessories that are plugged in to your computer. This includes things like printers, USB hubs, or mobile devices.
  4. Hold down the power button for ten seconds. Then, press the power button again to see if the computer turns on.
  5. Reset the SMC.
  6. If you recently installed memory or a drive in your Mac, make sure it's compatible, supported, and installed correctly. If possible, reinstall the original memory or drive to see if the issue persists.
  7. If your Mac still won't start up after you've tried each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar (available in some countries only).
    Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).


Thank you for using Apple Support Communities.

Not turning on

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.