Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Problem with Apple HDD, cant be checked or repaired

Hey!

I just have a problem with my Mac:

When I run the hard disc programm it says, Apple HDD it cant be checked or repaired. Problem with the partition which may disturb the booting.


There was a trouble with the Macintosh HD (Invalid amount of blocks), which I could solve by using the repair in the recovery modus.

Macintosh HD is fine now, after I repaired it in the recovery modus. There was a problem with Apache Open Office, which I just had deleated

before running the hard disc programm.

So Macintosh seems to be fine now.

Apple HDD is fine in the recovery modus. But: still not fine in the "normal modus". There it still says: Apple HDD cant be checked or repaired.

Problem with the partition which may disturb the booting.


So, after the repair of Macintosh HD, when I saw that Apple HDD cant still be repaired, I used Time Machine

to restore the system to an earlier point, where I know, the Mac was fine. Didnt help.


Then I wanted to make a new installation of Mac OS X


Since then I cannot get back into the recovery modus:

Everytime I press CMD+R while booting, a turning Globus appears instead of the Apple and only offers me to make a full recovery via Internet.

And it was fine before using Time Machine....?


The Mac seems to work fine. I can boot and work with it.

Do I have a problem now? Or is it ok?

I hope my translation is understandable....Thanks very much for any help!!!!


My Mac:

Mac OS X Lion 10.7.5 (11G63)

2.3 GHz Intel Core i7

4 GB 1600 MHz DDR3

Macintosh HD


in German, this is the protocoll before the repair of Macintosh HDD:



2015-11-25 18:22:45 +0100: Volume „Macintosh HD“ überprüfen

2015-11-25 18:22:45 +0100: Überprüfung wird gestartet:

2015-11-25 18:22:48 +0100: Speichersystem prüfen2015-11-25 18:22:48 +0100: Volume wird überprüft.

2015-11-25 18:22:48 +0100: disk0s2: Suchen nach Volume Headers

2015-11-25 18:22:48 +0100: disk0s2: Suchen nach Disk Labels

2015-11-25 18:22:48 +0100: Logische Volumegruppe 7EB5558E-D7DA-4BFF-B60C-13DDF4B12B49 umfasst 1 Gerät

2015-11-25 18:22:48 +0100: Logische Volumegruppe besitzt ein 16 MB Metadaten-Volume mit double Redundanz

2015-11-25 18:22:48 +0100: Suche nach gültigen Checkpoint in Metadaten starten

2015-11-25 18:22:48 +0100: Segment Headers laden und überprüfen

2015-11-25 18:22:49 +0100: Checkpoint Payload laden und überprüfen

2015-11-25 18:22:49 +0100: Transaction Segment laden und überprüfen

2015-11-25 18:22:49 +0100: Transaction Segment laden und überprüfen

2015-11-25 18:22:49 +0100: 1 neueste Non-Checkpoint-Transaktionen integrieren

2015-11-25 18:22:49 +0100: Virtual Address Table laden und überprüfen

2015-11-25 18:22:49 +0100: Segment Usage Table laden und überprüfen

2015-11-25 18:22:49 +0100: Metadata Superblock laden und überprüfen

2015-11-25 18:22:49 +0100: Logical Volumes B-Trees laden und überprüfen

2015-11-25 18:22:49 +0100: Logische Volumegruppe enthält 1 logische Volumes

2015-11-25 18:22:49 +0100: BB652547-397C-429E-8D71-28DA475C0A17 laden und überprüfen

2015-11-25 18:22:49 +0100: 858C2726-662D-4693-BD54-C29A358D402A laden und überprüfen

2015-11-25 18:22:49 +0100: Freespace Summary laden und überprüfen

2015-11-25 18:22:49 +0100: Block Accounting laden und überprüfen

2015-11-25 18:22:49 +0100: Segment Cleaning laden und überprüfen

2015-11-25 18:22:49 +0100: Neuester Wiederaufsetzpunkt für Transaktion ist gültig

2015-11-25 18:22:49 +0100: Das Volume „7EB5558E-D7DA-4BFF-B60C-13DDF4B12B49“ ist anscheinend in Ordnung.

2015-11-25 18:22:50 +0100: Dateisystem prüfen2015-11-25 18:22:51 +0100: Live-Verifizierung durchführen.

2015-11-25 18:22:51 +0100: HFS+ Volume (Journaled) überprüfen.

2015-11-25 18:22:51 +0100: Zusatzdatei für Dateiaufbau wird überprüft.

2015-11-25 18:22:51 +0100: Katalog wird überprüft.

2015-11-25 18:24:13 +0100: Falsche Blockanzahl für die Datei „Apache_OpenOffice_4.1.2_MacOS_x86-64_install_de.dmg“

2015-11-25 18:24:13 +0100: („9272“ sollte anstelle von „48113“ stehen)

2015-11-25 18:24:13 +0100: Multi-Link-Dateien werden überprüft.

2015-11-25 18:24:13 +0100: Kataloghierarchie wird überprüft.

2015-11-25 18:24:13 +0100: Datei für erweiterte Attribute wird überprüft.

2015-11-25 18:24:13 +0100: Volume-Bitmap wird überprüft.

2015-11-25 18:24:13 +0100: Volume-Bitmap muss aufgrund verwaister Blöcke geringfügig repariert werden

2015-11-25 18:24:13 +0100: Informationen des Volumes werden überprüft.

2015-11-25 18:24:13 +0100: Ungültige Anzahl freier Blöcke

2015-11-25 18:24:13 +0100: („48770865“ sollte anstelle von „48732024“ stehen)

2015-11-25 18:24:13 +0100: Das Volume „Macintosh HD“ ist beschädigt und muss repariert werden.

2015-11-25 18:24:13 +0100: Fehler: Dieses Volume muss unter Verwendung der Wiederherstellungspartition (Recovery HD) repariert werden. Starten Sie den Computer neu und halten Sie die Befehlstaste und die Taste „R“ gedrückt, bis das Apple-Logo angezeigt wird. Wählen Sie im Fenster „Mac OS X Dienstprogramme“ die Option „Festplatten-Dienstprogramm“. 2015-11-25 18:24:13 +0100:

2015-11-25 18:24:13 +0100: Das Festplatten-Dienstprogramm hat die Überprüfung von „Macintosh HD“ gestoppt: Dieses Volume muss unter Verwendung der Wiederherstellungspartition (Recovery HD) repariert werden. Starten Sie den Computer neu und halten Sie die Befehlstaste und die Taste „R“ gedrückt, bis das Apple-Logo angezeigt wird. Wählen Sie im Fenster „Mac OS X Dienstprogramme“ die Option „Festplatten-Dienstprogramm“.

2015-11-25 18:24:13 +0100:


**********

2015-11-25 18:38:03 +0100: Festplatten-Dienstprogramm wurde gestartet.


2015-11-25 18:38:18 +0100: Partitionstabelle für „APPLE HDD HTS547550A9E384 Media“ überprüfen

2015-11-25 18:38:18 +0100: Überprüfung wird gestartet:

2015-11-25 18:38:18 +0100: Voraussetzungen überprüfen

2015-11-25 18:38:19 +0100: Die Partitionsliste überprüfen

2015-11-25 18:38:19 +0100: Nach einer EFI-Systempartition suchen

2015-11-25 18:38:19 +0100: Die Größe der EFI-Systempartition überprüfen

2015-11-25 18:38:19 +0100: Das Dateisystem der EFI-Systempartition überprüfen

2015-11-25 18:38:27 +0100: Alle Loader-Speicherplätze von HFS-Datenpartitionen überprüfen

2015-11-25 18:38:27 +0100: Partitionen des physischen Core-Speicher-Volume überprüfen

2015-11-25 18:38:42 +0100: Speichersystem prüfen

2015-11-25 18:38:42 +0100: Bei der Partitionstabelle sind Probleme aufgetreten, die den Startvorgang möglicherweise verhindern.

2015-11-25 18:38:42 +0100: Fehler: Das Überprüfen oder Reparieren des Speichersystems ist fehlgeschlagen.2015-11-25 18:38:42 +0100:

2015-11-25 18:38:42 +0100: : Das Überprüfen oder Reparieren des Speichersystems ist fehlgeschlagen.

2015-11-25 18:38:42 +0100:

Mac Pro, Mac OS X (10.7.5)

Posted on Nov 26, 2015 10:26 AM

Reply
2 replies

Nov 27, 2015 10:34 AM in response to a brody

Hey a brody

Thanks for your reply. I do have a back up. I will try out Alsoft. Hope thats not too complicated as Im not a crack...

But isnt it strange that the Apple HDD seems to be fine when I check it in the recovery modus?

And I also dont get why - now - I cant get into the recovery modus anymore. No matter what shortcuts I press while booting, the only thing which appears is the globus.

Problem with Apple HDD, cant be checked or repaired

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.