Apple watch wont turn on
I tried to unpair my watch with my old broken phone by reseting to factory settings. During this process I have no idea what I did but now it wont turn on. Anyone have any ideas?
Apple Watch, iOS 9.2.1
I tried to unpair my watch with my old broken phone by reseting to factory settings. During this process I have no idea what I did but now it wont turn on. Anyone have any ideas?
Apple Watch, iOS 9.2.1
Hi Chazz
Try charging your watch (allow up to 2.5 hours for a full charge):
If it does not turn on after that, try force restarting it:
If it still does not turn on, contact Apple Support (mail-in service may be available) or make a Genius Bar reservation with a view to having your watch serviced under warranty:
Hi
Ive had the same problem - thought it was charging until it went dead. However I found that by plugging the charging cable into another usb socket the current wasn't getting through. I plugged the cable into a usb plug and then into the mains and hey presto ..... its charging again 🙂
Which kind of makes life difficult at night if I want to charge all my appliances and have a bedside light available - a usb hub isn't always going to work. Technology eh!
Hope this helps some of you before you go rebooting, resetting or posting back you're watches.................
apologies for the sp - should be "your"!
Hello
In my case , my appel watch is new
When i´m going tu turn on for 1st time , never turn on
The watch show de icon red off no batery
When I charge , the watch show de icon green only por 1 seg , like the wathc is charging
I charge all nigth , but de result is de same.
When i´m going tu turn on for 1st time , never turn on.The watch show de icon red off no batery
Anyone have any ideas?
Thanks
Hi - when charging your watch, check that:
All plastic wrap has been removed from both ends and both sides of the charging cable (check closely on the head of the charger).
Some watch docks, stands, cases or protectors might hinder this.
Under normal operation, charging should only take up to around 2.5 hours for a full charge.
More information:
Check your battery and charge your Apple Watch - Apple Support
The first screen indicates that charging has started. It is then normal for the screen to sleep (go black) whilst charging continues. You can tap on the screen at any time to temporarily wake the screen and check the charging status.
The second screen (with the red charging icon) indicates that the watch battery is still very low and needs to be charged.
If you have followed all of the steps in my previous reply and have left the watch charging for longer than 2-3 hours, try force restarting your watch: press and hold both the side button and Digital Crown for around 10 seconds, until you see the Apple logo.
If the issue persists, contact Apple Support (mail-in service may be available) or make a Genius Bar reservation with a view to having your watch and power accessories checked under warranty:
Apple watch wont turn on