correct power tap for evga gtx980 ti
Hi all,
I bought an EVGA GTX980 TI for my late 2010 Macpro. I am using all four sata ports. Will there be enough watts on the optical drive rail?
PowerMac, Mac OS X (10.5.5)
Hi all,
I bought an EVGA GTX980 TI for my late 2010 Macpro. I am using all four sata ports. Will there be enough watts on the optical drive rail?
PowerMac, Mac OS X (10.5.5)
You do know there are connectors for two six-pin aux connectors inside the Mac chassis, right?
What does this new beast want for power inputs? two sixes? one eight?
It has not arrived yet but I believe it has one six and one 8 Molex inputs. It is an EVGA reference board. Are those pins you are talking about the ones that route through the motherboard? I have heard horror stores where people have tried those and fried the whole board. The card pulls 298 watts maxed out which is just under the 300 watts available through the board.
The card will work fine with the power supply in the Mac Pro.
You will need to install drivers for the card
http://www.macvidcards.com/store/p49/Nvidia_GTX_980_Ti_6_GB.html
you will also need a 6 pin to 8 pin power cable
http://www.ebay.com/itm/16AWG-Mac-Pro-Mini-6-pin-to-8pin-PCIe-Video-Card-Power-C able-37CM/301935770341?_trksid=p2141725.…
in addition to a 6-pin to 6 pin cable
http://www.ebay.com/itm/Mini-6-pin-to-6-pin-PCI-e-PCIe-Power-Cable-for-Apple-Mac -Pro-Video-Card-/151450438011
correct power tap for evga gtx980 ti