Q: mid 2010 macbook pro doesn't sleep and screen keeps flickering
-
-
May 17, 2016 12:58 PMby Linc Davis,When you see the flickering, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any one of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES â–¹ All Messages
from the log list on the left. If you don't see that list, select
View â–¹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.
If you have an account on Pastebin, please don't select Private from the Paste Exposure menu on the page, because then no one but you will be able to see it.
-
May 17, 2016 1:28 PMby pvirus86,this is the lines of code which u asked for.
this is when i logged into the system for the first time.
2016-05-17 4:07:59.641 PM com.apple.xpc.launchd[1]: (com.teamviewer.desktop) This service is defined to be constantly running and is inherently inefficient.
2016-05-17 4:07:59.641 PM com.apple.xpc.launchd[1]: (org.macosforge.xquartz.startx) The ServiceIPC key is no longer respected. Please remove it.
2016-05-17 4:07:59.670 PM otherbsd[383]: Failed to bootstrap agent: path = /Users/P-VIRUS/Library/LaunchAgents/jp.co.canon.Inkjet_Extended_Survey_Agent.pl ist, error = 119: Service is disabled
2016-05-17 4:07:59.704 PM distnoted[384]: # distnote server agent absolute time: 288.237416301 civil time: Tue May 17 16:07:59 2016 pid: 384 uid: 501 root: no
2016-05-17 4:07:59.746 PM lsd[386]: LaunchServices: Scheme mapping file does not exist, creating file.
2016-05-17 4:07:59.951 PM lsd[386]: LaunchServices: Could not store lsd-identifiers file at /private/var/db/lsd/com.apple.lsdschemes.plist
2016-05-17 4:08:00.052 PM lsd[386]: LaunchServices: Could not store lsd-identifiers file at /private/var/db/lsd/com.apple.lsdschemes.plist
2016-05-17 4:08:00.069 PM lsd[386]: LaunchServices: Could not store lsd-identifiers file at /private/var/db/lsd/com.apple.lsdschemes.plist
2016-05-17 4:08:00.126 PM lsd[386]: LaunchServices: Could not store lsd-identifiers file at /private/var/db/lsd/com.apple.lsdschemes.plist
2016-05-17 4:08:00.127 PM com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.user.domain.501.100005.Aqua) Could not import service from caller: caller = otherbsd.383, service = jp.co.canon.ij.scanutility2.CIJSUAgent, error = 119: Service is disabled
2016-05-17 4:08:00.127 PM otherbsd[383]: Could not submit LoginItem job jp.co.canon.ij.scanutility2.CIJSUAgent: 119: Service is disabled
2016-05-17 4:08:00.131 PM com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.user.domain.501.100005.Aqua) Could not import service from caller: caller = otherbsd.383, service = com.theweathernetwork.weathereyewrapper, error = 119: Service is disabled
2016-05-17 4:08:00.131 PM otherbsd[383]: Could not submit LoginItem job com.theweathernetwork.weathereyewrapper: 119: Service is disabled
2016-05-17 4:08:00.131 PM com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.user.domain.501.100005.Aqua) Could not import service from caller: caller = otherbsd.383, service = com.getdropbox.dropbox.loginhelper, error = 119: Service is disabled
2016-05-17 4:08:00.132 PM otherbsd[383]: Could not submit LoginItem job com.getdropbox.dropbox.loginhelper: 119: Service is disabled
2016-05-17 4:08:00.260 PM sharingd[394]: 16:08:00.258 : Starting Up...
2016-05-17 4:08:00.328 PM sharingd[394]: 16:08:00.327 : Device Capabilities (Handoff:NO, Instant Hotspot:NO, AirDrop:NO, Legacy AirDrop:YES, Remote Disc:NO)
2016-05-17 4:08:00.481 PM com.apple.xpc.launchd[1]: (com.apple.appkit.xpc.sandboxedServiceRunner) The JoinExistingSession key is only available to Application services.
2016-05-17 4:08:00.519 PM UserEventAgent[382]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
2016-05-17 4:08:00.621 PM UserEventAgent[382]: user agent networkd: built Feb 9 2016 17:07:31
2016-05-17 4:08:00.714 PM UserEventAgent[382]: received an unknown event from daemon
2016-05-17 4:08:01.177 PM com.apple.CDScheduler[382]: Initial power state set to Battery Power
2016-05-17 4:08:01.000 PM kernel[0]: ignored is_io_service_close(0x1000003ce,IOHIDParamUserClient)
2016-05-17 4:08:01.438 PM WindowServer[210]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -login
2016-05-17 4:08:01.440 PM WindowServer[210]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -AMBDprefs
2016-05-17 4:08:01.590 PM DMProxy[405]: AMBD Services: _CFXPCCreateXPCObjectFromCFObject failed!!
2016-05-17 4:08:01.706 PM WindowServer[210]: CGXSetDisplayColorProfileAndTransfer: Display 0x5b81c5c0: Unit 0; ColorProfile { 61094055 }; TransferFormula (1.000000, 1.000000, 1.000000)
2016-05-17 4:08:02.270 PM secinitd[410]: UID[501]: cache loaded: /System/Library/Caches/com.apple.app-sandbox-cache.plist
2016-05-17 4:08:02.277 PM com.apple.SecurityServer[87]: Session 100008 created
2016-05-17 4:08:03.265 PM WindowServer[210]: disable_update_timeout: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
2016-05-17 4:08:04.689 PM SystemUIServer[389]: [BluetoothHIDDeviceController] EventServiceConnectedCallback
2016-05-17 4:08:04.689 PM SystemUIServer[389]: [BluetoothHIDDeviceController] EventServiceDisconnectedCallback
2016-05-17 4:08:04.734 PM iconservicesagent[417]: iconservicesagent launched.
2016-05-17 4:08:04.746 PM iconservicesagent[417]: Starting service with cache path: /var/folders/kk/qnswg6mn7t95nmhtxss6sdnm0000gn/C/com.apple.iconservices
2016-05-17 4:08:04.764 PM WindowServer[210]: common_reenable_update: UI updates were finally reenabled by application "SystemUIServer" after 3.13 seconds [0.32fps] (server forcibly re-enabled them after 1.63 seconds [1.00fps])
2016-05-17 4:08:04.870 PM Finder[390]: assertion failed: 15E65: libxpc.dylib + 78986 [2CC7CF36-66D4-301B-A6D8-EBAE7405B008]: 0x89
2016-05-17 4:08:04.935 PM Spotlight[407]: spot: agent checkin
2016-05-17 4:08:05.257 PM PowerChime[441]: objc[441]: Class BUIPowerSource is implemented in both /System/Library/PrivateFrameworks/BatteryUIKit.framework/Versions/A/BatteryUIKi t and /System/Library/CoreServices/PowerChime.app/Contents/MacOS/PowerChime. One of the two will be used. Which one is undefined.
2016-05-17 4:08:05.273 PM com.apple.xpc.launchd[1]: (org.gpgtools.gpgmail.enable-bundles[426]) Could not find and/or execute program specified by service: 2: No such file or directory: /Library/Application Support/GPGTools/uuid-patcher
2016-05-17 4:08:05.273 PM com.apple.xpc.launchd[1]: (org.gpgtools.gpgmail.enable-bundles[426]) Service setup event to handle failure and will not launch until it fires.
2016-05-17 4:08:05.273 PM com.apple.xpc.launchd[1]: (com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae[421]) Could not find and/or execute program specified by service: 2: No such file or directory: /Applications/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper
2016-05-17 4:08:05.273 PM com.apple.xpc.launchd[1]: (com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae[421]) Service setup event to handle failure and will not launch until it fires.
2016-05-17 4:08:05.512 PM xpcproxy[452]: CFPreferences could not connect to its daemon.
Preferences using the connection 0x0 will be volatile and will not be persisted to disk.
2016-05-17 4:08:05.638 PM apsd[84]: Attempt to set push wake topics without dark wake enabled: ()
2016-05-17 4:08:05.646 PM apsd[84]: Attempt to set push wake topics without dark wake enabled: ()
2016-05-17 4:08:05.653 PM apsd[84]: Attempt to set push wake topics without dark wake enabled: ()
2016-05-17 4:08:05.659 PM apsd[84]: Attempt to set push wake topics without dark wake enabled: ()
2016-05-17 4:08:05.661 PM apsd[84]: Attempt to set push wake topics without dark wake enabled: ()
2016-05-17 4:08:05.663 PM apsd[84]: Attempt to set push wake topics without dark wake enabled: ()
2016-05-17 4:08:05.667 PM apsd[84]: Attempt to set push wake topics without dark wake enabled: ()
2016-05-17 4:08:05.670 PM apsd[84]: Attempt to set push wake topics without dark wake enabled: ()
2016-05-17 4:08:05.714 PM PowerChime[441]: PowerChime: chime enabled by hardware: 0
2016-05-17 4:08:05.714 PM PowerChime[441]: PowerChime disabled - ChimeOnNoHardware default: 0
2016-05-17 4:08:05.827 PM com.apple.xpc.launchd[1]: (com.apple.FileSyncAgent.PHD.isRunning) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
2016-05-17 4:08:05.858 PM com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand
2016-05-17 4:08:05.860 PM com.apple.xpc.launchd[1]: (com.apple.trustd.agent) This key does not do anything: OnDemand
2016-05-17 4:08:05.861 PM com.apple.xpc.launchd[1]: (com.apple.trustd.agent) The ServiceIPC key is no longer respected. Please remove it.
2016-05-17 4:08:05.861 PM com.apple.xpc.launchd[1]: (com.apple.TrustEvaluationAgent) This key does not do anything: OnDemand
2016-05-17 4:08:05.871 PM com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.domain.user.55) Caller specified a plist with bad ownership/permissions: path = /Library/LaunchAgents/com.canon.MFManager.plist, caller = appleeventsd.55
2016-05-17 4:08:05.882 PM com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.domain.user.55) Failed to bootstrap path: path = /Library/LaunchAgents/com.canon.MFManager.plist, error = 122: Path had bad ownership/permissions
2016-05-17 4:08:06.063 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[455]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
2016-05-17 4:08:06.090 PM apsd[84]: Attempt to set push wake topics without dark wake enabled: ()
2016-05-17 4:08:06.207 PM AntivirusforMac[398]: /Library/Preferences/com.bitdefender.antivirusformac.plist
2016-05-17 4:08:06.462 PM AntivirusforMac[398]: Failed to connect (oButtonsView) outlet from (BDMainController) to (NSView): missing setter or instance variable
2016-05-17 4:08:06.463 PM AntivirusforMac[398]: Could not connect action, target class BDMainController does not respond to -QuickScan:
2016-05-17 4:08:06.463 PM AntivirusforMac[398]: Could not connect action, target class BDMainController does not respond to -BDButtonMainAv5:
2016-05-17 4:08:06.463 PM AntivirusforMac[398]: Could not connect action, target class BDMainController does not respond to -TriggerIPM:
2016-05-17 4:08:06.473 PM logind[102]: -[SessionManager getClient:withRole:inAuditSession:]:241: ERROR: No session dictionary for audit session 100008
2016-05-17 4:08:06.473 PM logind[102]: _SMGetSessionAgent:73: ERROR: __SMGetClientForAuditSessionAgent failed 2
2016-05-17 4:08:06.474 PM IMDPersistenceAgent[466]: SACShieldWindowShowing:925: ERROR: NULL response
2016-05-17 4:08:06.567 PM apsd[84]: Attempt to set push wake topics without dark wake enabled: ()
2016-05-17 4:08:06.937 PM Spotlight[407]: applications query - started
2016-05-17 4:08:07.124 PM cloudpaird[445]: DEBUG cloudpaird: system does not support Continuity
2016-05-17 4:08:07.533 PM MRT[454]: Agent finished.
i just went to the launchpad and clicked on others folder and it took time to open as it was loading in slow motion...
2016-05-17 4:22:52.857 PM com.apple.lakitu[546]: Checking iCDP status for DSID 405900614 (checkWithServer=0)
2016-05-17 4:22:52.993 PM cdpd[628]: Saw change in network reachability (isReachable=2)
2016-05-17 4:22:52.994 PM cdpd[628]: Received new connection <NSXPCConnection: 0x7fda82c2c820> connection from pid 546, checking entitlements...
2016-05-17 4:22:52.995 PM cdpd[628]: Unknown client type with bundleID 'com.apple.lakitu'
2016-05-17 4:22:52.995 PM cdpd[628]: Accepting new connection <NSXPCConnection: 0x7fda82c2c820> connection from pid 546 with entitlements mask 3
2016-05-17 4:22:53.041 PM cdpd[628]: KeychainGetICDPStatus: keychain: -25300
2016-05-17 4:22:53.041 PM cdpd[628]: KeychainGetICDPStatus: status: off
2016-05-17 4:22:53.042 PM com.apple.lakitu[546]: iCDP status for DSID 405900614 is DISABLED
2016-05-17 4:22:53.119 PM usernoted[397]: Connection does not have the proper entitlement (com.apple.private.notificationcenter-system) to connect to the system notification center. All communication will be denied. center com.apple.followup.notification
2016-05-17 4:22:54.166 PM Console[631]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
2016-05-17 4:22:55.126 PM accountsd[411]: AIDA Notification plugin running
2016-05-17 4:22:55.725 PM com.apple.AddressBook.InternetAccountsBridge[634]: Checking iCDP status for DSID 405900614 (checkWithServer=0)
2016-05-17 4:22:55.725 PM com.apple.AddressBook.InternetAccountsBridge[634]: Checking iCDP status for DSID 405900614 (checkWithServer=0)
2016-05-17 4:22:55.725 PM com.apple.AddressBook.InternetAccountsBridge[634]: Daemon connection invalidated!
2016-05-17 4:22:55.726 PM com.apple.AddressBook.InternetAccountsBridge[634]: Daemon connection invalidated!
2016-05-17 4:22:55.726 PM com.apple.AddressBook.InternetAccountsBridge[634]: XPC Error while checking if iCDP is enabled for DSID 405900614: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service named com.apple.cdp.daemon was invalidated." UserInfo={NSDebugDescription=The connection to service named com.apple.cdp.daemon was invalidated.}
2016-05-17 4:22:55.726 PM com.apple.AddressBook.InternetAccountsBridge[634]: XPC Error while checking if iCDP is enabled for DSID 405900614: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service named com.apple.cdp.daemon was invalidated." UserInfo={NSDebugDescription=The connection to service named com.apple.cdp.daemon was invalidated.}
2016-05-17 4:22:56.807 PM syncdefaultsd[632]: accountsd has been removed from syncing apps.
2016-05-17 4:22:56.892 PM sandboxd[145]: ([634]) com.apple.Addres(634) deny mach-lookup com.apple.cdp.daemon
2016-05-17 4:22:56.965 PM sandboxd[145]: ([634]) com.apple.Addres(634) deny mach-lookup com.apple.cdp.daemon
2016-05-17 4:22:57.658 PM accountsd[411]: AIDA Notification plugin running
2016-05-17 4:22:57.780 PM com.apple.AddressBook.InternetAccountsBridge[634]: Checking iCDP status for DSID 405900614 (checkWithServer=0)
2016-05-17 4:22:57.785 PM com.apple.AddressBook.InternetAccountsBridge[634]: Daemon connection invalidated!
2016-05-17 4:22:57.786 PM com.apple.AddressBook.InternetAccountsBridge[634]: XPC Error while checking if iCDP is enabled for DSID 405900614: Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service named com.apple.cdp.daemon was invalidated." UserInfo={NSDebugDescription=The connection to service named com.apple.cdp.daemon was invalidated.}
2016-05-17 4:22:59.112 PM sandboxd[145]: ([634]) com.apple.Addres(634) deny mach-lookup com.apple.cdp.daemon
-
May 17, 2016 1:37 PMby Linc Davis,Please remove "BitDefender Antivirus" by following the instructions on this page. I can't vouch for the effectiveness of those instructions. If they don't work, refer to the developer for more information.
Back up all data before making any changes. Never install any "anti-virus" or "anti-malware" software again.
-
May 17, 2016 6:31 PMby Linc Davis,1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.8 ("Mountain Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, please back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone who understands the code can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website many times over a period of years. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a general summary of what you need to do, if you choose to proceed:
☞ Copy the text of a particular web page (not this one) to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is intermittently slow, run the test during a slowdown.
You may have started up in safe mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual before running it. If you can only test in safe mode, do that.
6. If you have more than one user, and only one user is affected by the problem,, and the affected user is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. Load this linked web page (on the website "Pastebin.") Press the key combination command-A to select all the text, then copy it to the Clipboard by pressing command-C.
8. Launch the built-in Terminal application in any one of the following ways:
☞ Enter the first few letters of its name ("Terminal") into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If the test is taking much longer than usual to run because the computer is very slow, you might be prompted for your password a second time. The authorization that you grant by entering it expires automatically after five minutes.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
Test startedPart 1 of 4 done at: … sec
…
Part 4 of 4 done at: … secThe test results are on the Clipboard.
Please close this window.The intervals between parts won't be exactly equal, but they give a rough indication of progress.
Wait for the final message "Please close this window" to appear—again, usually within a few minutes. If you don't see that message within about 30 minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step. You'll have incomplete results, but still something.
In order to get results, the test must either be allowed to complete or else manually stopped as above. If you close the Terminal window while the test is still running, the partial results won't be saved.
11. When the test is complete, or if you stopped it manually, quit Terminal. The results will have been saved to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "close this window" message. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the software that runs this website. Please post the test results on Pastebin, then post a link here to the page you created.
If you have an account on Pastebin, please don't select Private from the Paste Exposure menu on the page, because then no one but you will be able to see it.
13. When you're done with the test, it's gone. There is nothing to uninstall or clean up.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
15. The linked UNIX shell script bears a notice of copyright. Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.
-
May 18, 2016 10:58 AMby pvirus86,Start time: 13:52:03 05/18/16
Model Identifier: MacBookPro7,1
System Version: OS X 10.11.4 (15E65)
Kernel Version: Darwin 15.4.0
System Integrity Protection: Enabled
Time since boot: 8 minutes
Memory
BANK 0/DIMM0:
Size: 8 GB
Speed: 1067 MHz
Status: OK
Manufacturer: 0x029E
BANK 1/DIMM0:
Size: 2 GB
Speed: 1067 MHz
Status: OK
Manufacturer: 0x80AD
Battery
Cycle Count: 1039
SATA
Hitachi HTS545032B9SA02
FileVault: FileVault master keychain appears to be installed
Log
May 17 16:03:45 AssertMacros: tmpData (value: 0x0), file: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785
May 17 16:03:45 IO80211ControllerMonitor::configureSubscriptions() failed to add subscriptionIO80211Controller::start _controller is 0xf9bfbe728b218111, provider is 0xf9bfbe728b17e511
May 17 16:04:35 NTFS-fs error (device /dev/disk0s4, pid 193): ntfs_restart_page_header_is_valid(): $LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
May 17 16:04:35 NTFS-fs error (device /dev/disk0s4, pid 193): ntfs_restart_page_header_is_valid(): $LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
May 17 16:04:35 NTFS-fs error (device /dev/disk0s4, pid 193): ntfs_logfile_check(): Did not find any restart pages in $LogFile and it was not empty.
May 17 16:06:51 process ss_conn_service[81] caught causing excessive wakeups. Observed wakeups rate (per sec): 246; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 46113
May 17 16:09:16 utun_start: ifnet_disable_output returned error 12
May 17 16:12:00 process WindowServer[210] caught causing excessive wakeups. Observed wakeups rate (per sec): 263; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 56073
May 18 06:56:55 AssertMacros: tmpData (value: 0x0), file: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785
May 18 06:56:55 IO80211ControllerMonitor::configureSubscriptions() failed to add subscriptionIO80211Controller::start _controller is 0xffea4dac75b1163f, provider is 0xffea4dac75a4fe3f
May 18 06:57:47 utun_start: ifnet_disable_output returned error 12
May 18 06:57:49 NTFS-fs error (device /dev/disk0s4, pid 204): ntfs_restart_page_header_is_valid(): $LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
May 18 06:57:49 NTFS-fs error (device /dev/disk0s4, pid 204): ntfs_restart_page_header_is_valid(): $LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
May 18 06:57:49 NTFS-fs error (device /dev/disk0s4, pid 204): ntfs_logfile_check(): Did not find any restart pages in $LogFile and it was not empty.
May 18 06:59:22 process ss_conn_service[81] caught causing excessive wakeups. Observed wakeups rate (per sec): 292; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45029
May 18 07:05:37 process WindowServer[209] caught causing excessive wakeups. Observed wakeups rate (per sec): 228; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 69854
May 18 07:17:11 Process launchd [1] disabling system-wide I/O Throttling
May 18 07:17:11 Process launchd [1] disabling system-wide CPU Throttling
May 18 13:44:24 AssertMacros: tmpData (value: 0x0), file: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-83.40.3/AppleCredentialManager/AppleCredentialManager.cpp, line: 785
May 18 13:44:24 IO80211ControllerMonitor::configureSubscriptions() failed to add subscriptionIO80211Controller::start _controller is 0x814f914e5fd64821, provider is 0x814f914e5fd86621
May 18 13:45:08 NTFS-fs error (device /dev/disk0s4, pid 202): ntfs_restart_page_header_is_valid(): $LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
May 18 13:45:08 NTFS-fs error (device /dev/disk0s4, pid 202): ntfs_restart_page_header_is_valid(): $LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
May 18 13:45:08 NTFS-fs error (device /dev/disk0s4, pid 202): ntfs_logfile_check(): Did not find any restart pages in $LogFile and it was not empty.
May 18 13:45:15 utun_start: ifnet_disable_output returned error 12
May 18 13:46:50 process ss_conn_service[80] caught causing excessive wakeups. Observed wakeups rate (per sec): 295; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45158
Activity
CPU: user 6%, system 23%
CPU per process: mds (UID 0) is using 26.9 %
Daemons
com.lexar.IRInstaller
com.devguru.ssconnservice
com.adobe.ARMDC.Communicator
com.microsoft.office.licensing.helper
com.teamviewer.service
com.google.keystone.daemon
jp.co.canon.MasterInstaller
com.adobe.SwitchBoard
com.adobe.fpsaud
com.adobe.ARMDC.SMJobBlessHelper
org.macosforge.xquartz.privileged_startx
com.teamviewer.Helper
com.bitdefender.agent
Agents
org.gpgtools.gpgmail.updater
com.fiplab.BatteryHealthHelper
com.adobe.ARM.UUID
com.google.keystone.system.agent
com.canon.MFManager
org.macosforge.xquartz.startx
com.adobe.ARMDCHelper.UUID
org.gpgtools.gpgmail.enable-bundles
com.teamviewer.desktop
com.teamviewer.teamviewer
launchd
/Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
- com.adobe.AAM.Startup-1.0
/Library/LaunchAgents/com.adobe.ARMDCHelper.UUID.plist
- com.adobe.ARMDCHelper.UUID
/Library/LaunchAgents/com.canon.MFManager.plist
- com.canon.MFManager
/Library/LaunchAgents/com.google.keystone.agent.plist
- com.google.keystone.system.agent
/Library/LaunchAgents/com.teamviewer.teamviewer.plist
- com.teamviewer.teamviewer
/Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist
- com.teamviewer.desktop
/Library/LaunchAgents/org.gpgtools.gpgmail.enable-bundles.plist
- org.gpgtools.gpgmail.enable-bundles
/Library/LaunchAgents/org.gpgtools.gpgmail.updater.plist
- org.gpgtools.gpgmail.updater
/Library/LaunchAgents/org.macosforge.xquartz.startx.plist
- org.macosforge.xquartz.startx
/Library/LaunchDaemons/com.adobe.ARMDC.Communicator.plist
- com.adobe.ARMDC.Communicator
/Library/LaunchDaemons/com.adobe.ARMDC.SMJobBlessHelper.plist
- com.adobe.ARMDC.SMJobBlessHelper
/Library/LaunchDaemons/com.adobe.fpsaud.plist
- com.adobe.fpsaud
/Library/LaunchDaemons/com.adobe.SwitchBoard.plist
- com.adobe.SwitchBoard
/Library/LaunchDaemons/com.bitdefender.agent.plist
- com.bitdefender.agent
/Library/LaunchDaemons/com.devguru.ssconnservice.plist
- com.devguru.ssconnservice
/Library/LaunchDaemons/com.google.keystone.daemon.plist
- com.google.keystone.daemon
/Library/LaunchDaemons/com.lexar.IRInstaller.plist
- com.lexar.IRInstaller
/Library/LaunchDaemons/com.microsoft.office.licensing.helper.plist
- com.microsoft.office.licensing.helper
/Library/LaunchDaemons/com.teamviewer.Helper.plist
- com.teamviewer.Helper
/Library/LaunchDaemons/com.teamviewer.teamviewer_service.plist
- com.teamviewer.service
/Library/LaunchDaemons/jp.co.canon.MasterInstaller.plist
- jp.co.canon.MasterInstaller
/Library/LaunchDaemons/org.macosforge.xquartz.privileged_startx.plist
- org.macosforge.xquartz.privileged_startx
Library/LaunchAgents/com.adobe.ARM.UUID.plist
- com.adobe.ARM.UUID
Library/LaunchAgents/jp.co.canon.Inkjet_Extended_Survey_Agent.plist
- jp.co.canon.Inkjet_Extended_Survey_Agent
Bundles
/System/Library/Extensions/ssuddrv.kext
- com.devguru.driver.SamsungComposite
/System/Library/Extensions/SXUPTP.kext
- com.silex.driver.sxuptp
/System/Library/Extensions/WD1394_64_109HPDriver.kext
- com.wdc.driver.1394.64.10.9
/System/Library/Extensions/WDUSB_64_109HPDriver.kext
- com.wdc.driver.USB.64.10.9
/Library/Extensions/BJUSBLoad.kext
- jp.co.canon.bj.print.BJUSBLoad
/Library/Extensions/CIJUSBLoad.kext
- jp.co.canon.ij.print.CIJUSBLoad
/Library/Internet Plug-Ins/AdobePDFViewer.plugin
- com.adobe.acrobat.pdfviewer
/Library/Internet Plug-Ins/AdobePDFViewerNPAPI.plugin
- com.adobe.acrobat.pdfviewerNPAPI
/Library/Internet Plug-Ins/EPPEX Plugin.plugin
- N/A
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/MeetingJoinPlugin.plugin
- com.microsoft.communicator.meetingjoinplugin
/Library/Internet Plug-Ins/PepperFlashPlayer/PepperFlashPlayer.plugin
- com.macromedia.PepperFlashPlayer.pepper
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/QuickTime/CanonMJPEGAVI.component
- jp.co.canon.MJPEGAVIExporter
/Library/QuickTime/CanonMJPEGAVIDec.component
- jp.co.canon.CanonMJPEGAVIDec
/Library/QuickTime/CanonText.component
- jp.co.canon.Text
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
/Library/Security/SecurityAgentPlugins/TeamViewerAuthPlugin.bundle
- com.teamviewer.AuthorizationPlugin
Library/Address Book Plug-Ins/SkypeABCaller.bundle
- com.skype.SkypeABCaller
Library/Address Book Plug-Ins/SkypeABChatter.bundle
- com.skype.SkypeABChatter
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.SkypeABDialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.SkypeABSMS
Library/Caches/com.apple.Safari/Extensions/AdBlock Ultimate.safariextension
- net.adblockultimate.adblockultimatesafari
Library/Caches/com.apple.Safari/Extensions/Norton Security.safariextension
- com.symantec.NortonInternetSecurityBF
Library/Caches/com.apple.Safari/Extensions/TrafficLight.safariextension
- com.BitDefender.TrafficLight
Library/Internet Plug-Ins/OctoshapeWeb.plugin
- com.octoshape.browserplugin
Library/Internet Plug-Ins/SkypePlugin-7.15.0.49.bundle
- com.skype.plugin
Apps
/Applications/Dropbox.app
Contents of /etc/hosts
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
Contents of /etc/pf.conf
scrub-anchor "com.apple/*"
nat-anchor "com.apple/*"
rdr-anchor "com.apple/*"
dummynet-anchor "com.apple/*"
anchor "com.apple/*"
load anchor "com.apple" from "/etc/pf.anchors/com.apple"
Contents of /etc/syslog.conf
install.* @127.0.0.1:32376
Contents of /etc/pam.d/authorization
auth optional pam_krb5.so use_first_pass use_kcminit
auth optional pam_ntlm.so use_first_pass
auth required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so
Contents of /etc/pam.d/checkpw
auth required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so no_check_home no_check_shell
Contents of /etc/pam.d/chkpasswd
auth required pam_opendirectory.so
account required pam_opendirectory.so
password required pam_permit.so
session required pam_permit.so
Contents of /etc/pam.d/cups
auth required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Contents of /etc/pam.d/ftpd
auth required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Contents of /etc/pam.d/login
auth optional pam_krb5.so use_kcminit
auth optional pam_ntlm.so try_first_pass
auth optional pam_mount.so try_first_pass
auth required pam_opendirectory.so try_first_pass
account required pam_nologin.so
account required pam_opendirectory.so
password required pam_opendirectory.so
session required pam_launchd.so
session required pam_uwtmp.so
session optional pam_mount.so
Contents of /etc/pam.d/login.term
account required pam_nologin.so
account required pam_opendirectory.so
session required pam_uwtmp.so
Contents of /etc/pam.d/other
auth required pam_deny.so
account required pam_deny.so
password required pam_deny.so
session required pam_deny.so
Contents of /etc/pam.d/passwd
auth required pam_permit.so
account required pam_opendirectory.so
password required pam_opendirectory.so
session required pam_permit.so
Contents of /etc/pam.d/rshd
auth required pam_permit.so
account required pam_nologin.so
account required pam_opendirectory.so
session required pam_launchd.so
Contents of /etc/pam.d/screensaver
auth optional pam_krb5.so use_first_pass use_kcminit
auth required pam_opendirectory.so use_first_pass nullok
account required pam_opendirectory.so
account sufficient pam_self.so
account required pam_group.so no_warn group=admin,wheel fail_safe
account required pam_group.so no_warn deny group=admin,wheel ruser fail_safe
Contents of /etc/pam.d/smbd
account required pam_sacl.so sacl_service=smb allow_trustacct
session required pam_permit.so
Contents of /etc/pam.d/sshd
auth optional pam_krb5.so use_kcminit
auth optional pam_ntlm.so try_first_pass
auth optional pam_mount.so try_first_pass
auth required pam_opendirectory.so try_first_pass
account required pam_nologin.so
account required pam_sacl.so sacl_service=ssh
account required pam_opendirectory.so
password required pam_opendirectory.so
session required pam_launchd.so
session optional pam_mount.so
Contents of /etc/pam.d/su
auth sufficient pam_rootok.so
auth required pam_opendirectory.so
account required pam_group.so no_warn group=admin,wheel ruser root_only fail_safe
account required pam_opendirectory.so no_check_shell
password required pam_opendirectory.so
session required pam_launchd.so
Contents of /etc/pam.d/sudo
auth required pam_opendirectory.so
account required pam_permit.so
password required pam_deny.so
session required pam_permit.so
Contents of /etc/ssh_config
Host *
XAuthLocation /opt/X11/bin/xauth
Contents of /etc/sshd_config
XAuthLocation /opt/X11/bin/xauth
Contents of /etc/periodic/daily/110.clean-tmps
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
case "$daily_clean_tmps_enable" in
[Yy][Ee][Ss])
if [ -z "$daily_clean_tmps_days" ]
then
echo '$daily_clean_tmps_enable is set but' \
'$daily_clean_tmps_days is not'
rc=2
else
echo ""
echo "Removing old temporary files:"
set -f noglob
args="-atime +$daily_clean_tmps_days -mtime +$daily_clean_tmps_days"
args="${args} -ctime +$daily_clean_tmps_days"
dargs="-empty -mtime +$daily_clean_tmps_days"
dargs="${dargs} ! -name .vfs_rsrc_streams_*"
[ -n "$daily_clean_tmps_ignore" ] && {
args="$args "`echo " ${daily_clean_tmps_ignore% }" |
sed 's/[ ][ ]*/ ! -name /g'`
dargs="$dargs "`echo " ${daily_clean_tmps_ignore% }" |
sed 's/[ ][ ]*/ ! -name /g'`
...and 21 more line(s)
Contents of /etc/periodic/daily/130.clean-msgs
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
case "$daily_clean_msgs_enable" in
[Yy][Ee][Ss])
if [ ! -d /var/msgs ]
then
echo '$daily_clean_msgs_enable is set but /var/msgs' \
"doesn't exist"
rc=2
else
echo ""
echo "Cleaning out old system announcements:"
[ -n "$daily_clean_msgs_days" ] &&
arg=-${daily_clean_msgs_days#-} || arg=
msgs -c $arg && rc=0 || rc=3
fi;;
*) rc=0;;
esac
exit $rc
Contents of /etc/periodic/daily/140.clean-rwho
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
case "$daily_clean_rwho_enable" in
[Yy][Ee][Ss])
if [ -z "$daily_clean_rwho_days" ]
then
echo '$daily_clean_rwho_enable is enabled but' \
'$daily_clean_rwho_days is not set'
rc=2
elif [ ! -d /var/rwho ]
then
echo '$daily_clean_rwho_enable is enabled but /var/rwho' \
"doesn't exist"
rc=2
else
echo ""
echo "Removing stale files from /var/rwho:"
case "$daily_clean_rwho_verbose" in
[Yy][Ee][Ss])
print=-print;;
*)
print=;;
...and 14 more line(s)
Contents of /etc/periodic/daily/199.clean-fax
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
if [ -d /var/spool/fax ]; then
echo ""
echo "Removing scratch fax files"
cd /var/spool/fax && \
find . -type f -name '[0-9]*.[0-9][0-9][0-9]' -mtime +7 -delete >/dev/null 2>&1;
fi
Contents of /etc/periodic/daily/310.accounting
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
case "$daily_accounting_enable" in
[Yy][Ee][Ss])
if [ ! -f /var/account/acct ]
then
echo '$daily_accounting_enable is set but /var/account/acct' \
"doesn't exist"
rc=2
elif [ -z "$daily_accounting_save" ]
then
echo '$daily_accounting_enable is set but ' \
'$daily_accounting_save is not'
rc=2
else
echo ""
echo "Rotating accounting logs and gathering statistics:"
cd /var/account
rc=0
n=$daily_accounting_save
rm -f acct.$n.gz acct.$n || rc=3
m=$n
...and 18 more line(s)
Contents of /etc/periodic/daily/400.status-disks
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
case "$daily_status_disks_enable" in
[Yy][Ee][Ss])
echo ""
echo "Disk status:"
df $daily_status_disks_df_flags && rc=1 || rc=3
;;
*) rc=0;;
esac
exit $rc
Contents of /etc/periodic/daily/420.status-network
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
case "$daily_status_network_enable" in
[Yy][Ee][Ss])
echo ""
echo "Network interface status:"
case "$daily_status_network_usedns" in
[Yy][Ee][Ss])
netstat -i && rc=0 || rc=3;;
*)
netstat -in && rc=0 || rc=3;;
esac;;
*) rc=0;;
esac
exit $rc
Contents of /etc/periodic/daily/430.status-rwho
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
case "$daily_status_rwho_enable" in
[Yy][Ee][Ss])
rwho=$(echo /var/rwho/*)
if [ -f "${rwho%% *}" ]
then
echo ""
echo "Local network system status:"
prog=ruptime
else
echo ""
echo "Local system status:"
prog=uptime
fi
rc=$($prog | tee /dev/stderr | wc -l)
if [ $? -eq 0 ]
then
[ $rc -gt 1 ] && rc=1
else
rc=3
fi;;
...and 3 more line(s)
Contents of /etc/periodic/daily/999.local
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
rc=0
for script in $daily_local
do
echo ''
case "$script" in
/*)
if [ -f "$script" ]
then
echo "Running $script:"
sh $script || rc=3
else
echo "$script: No such file"
[ $rc -lt 2 ] && rc=2
fi;;
*)
echo "$script: Not an absolute path"
[ $rc -lt 2 ] && rc=2;;
esac
done
exit $rc
Contents of /etc/periodic/monthly/199.rotate-fax
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
echo ""
printf %s "Rotating fax log files:"
cd /var/log/fax
for i in *.log; do
if [ -f "${i}" ]; then
echo -n " $i"
if [ -x /usr/bin/gzip ]; then gzext=".gz"; else gzext=""; fi
if [ -f "${i}.3${gzext}" ]; then mv -f "${i}.3${gzext}" "${i}.4${gzext}"; fi
if [ -f "${i}.2${gzext}" ]; then mv -f "${i}.2${gzext}" "${i}.3${gzext}"; fi
if [ -f "${i}.1${gzext}" ]; then mv -f "${i}.1${gzext}" "${i}.2${gzext}"; fi
if [ -f "${i}.0${gzext}" ]; then mv -f "${i}.0${gzext}" "${i}.1${gzext}"; fi
if [ -f "${i}" ]; then mv -f "${i}" "${i}.0" && if [ -x /usr/bin/gzip ]; then gzip -9 "${i}.0"; fi; fi
touch "${i}" && chmod 640 "${i}" && chown root:admin "${i}"
fi
done
echo ""
Contents of /etc/periodic/monthly/200.accounting
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
oldmask=$(umask)
umask 066
case "$monthly_accounting_enable" in
[Yy][Ee][Ss])
W=/var/log/wtmp
rc=0
remove=NO
if [ $rc -eq 0 ]
then
echo ""
echo "Doing login accounting:"
rc=$(ac -p | sort -nr -k 2 | tee /dev/stderr | wc -l)
[ $rc -gt 0 ] && rc=1
fi
[ $remove = YES ] && rm -f $W.0;;
*) rc=0;;
esac
umask $oldmask
exit $rc
Contents of /etc/periodic/monthly/999.local
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
rc=0
for script in $monthly_local
do
echo ''
case "$script" in
/*)
if [ -f "$script" ]
then
echo "Running $script:"
sh $script || rc=3
else
echo "$script: No such file"
[ $rc -lt 2 ] && rc=2
fi;;
*)
echo "$script: Not an absolute path"
[ $rc -lt 2 ] && rc=2;;
esac
done
exit $rc
Contents of /etc/periodic/weekly/320.whatis
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
case "$weekly_whatis_enable" in
[Yy][Ee][Ss])
echo ""
echo "Rebuilding whatis database:"
MANPATH=`/usr/bin/manpath -q`
if [ $? = 0 ]
then
if [ -z "${MANPATH}" ]
then
echo "manpath failed to find any manpage directories"
rc=3
else
rc=0
/usr/libexec/makewhatis.local "${MANPATH}" || rc=3
if [ X"${man_locales}" != X ]
then
for i in ${man_locales}
do
LC_ALL=$i /usr/libexec/makewhatis.local -a \
-L "${MANPATH}" || rc=3
...and 9 more line(s)
Contents of /etc/periodic/weekly/999.local
if [ -r /etc/defaults/periodic.conf ]
then
. /etc/defaults/periodic.conf
source_periodic_confs
fi
rc=0
for script in $weekly_local
do
echo ''
case "$script" in
/*)
if [ -f "$script" ]
then
echo "Running $script:"
sh $script || rc=3
else
echo "$script: No such file"
[ $rc -lt 2 ] && rc=2
fi;;
*)
echo "$script: Not an absolute path"
[ $rc -lt 2 ] && rc=2;;
esac
done
exit $rc
Contents of /Library/Preferences/com.apple.security.appsandbox.plist (XML document text)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>UnrestrictSpotlightContainerScope</key>
<true/>
</dict>
</plist>
Contents of /Library/Preferences/SystemConfiguration/com.apple.Boot.plist (XML document text)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Kernel Flags</key>
<string></string>
</dict>
</plist>
Firewall: On
TCP/IP
Subnet mask: 255.255.224.0
Listeners
launchd: afpovertcp
launchd: afpovertcp
launchd: microsoft-ds
launchd: microsoft-ds
kdc: kerberos
Safari extensions
AdBlock Ultimate
Norton Security
TrafficLight
Restricted files: 391
Elapsed time (s): 300
