Q: MBPr crashing (mostly on Safari) with Google Maps

Please launch the Console application in any one of the following ways:

☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)

☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Step 1

For this step, the title of the Console window should be All Messages. If it isn't, select

          SYSTEM LOG QUERIES ▹ All Messages

from the log list on the left. If you don't see that list, select

          View ▹ Show Log List

from the menu bar at the top of the screen.

In the top right corner of the Console window, there's a search box labeled Filter. Enter the name of the crashed application or process. For example, if Safari crashed, you would enter "Safari" (without the quotes.)

Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.

The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.

Please don't indiscriminately dump thousands of lines from the log into this discussion.

Please don't post screenshots of log messages—post the text.

Some private information, such as your name, may appear in the log. Anonymize before posting.

Step 2

In the Console window, please clear the search box, then select

          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports

(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.

I know the report is long, maybe several hundred lines. Please post all of it anyway. If the report is only a few lines, make sure you cleared the search box.

If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.

In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)

Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

When you post the log extract or the crash report, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created.

If you have an account on Pastebin, please don't select Private from the Paste Exposure menu on the page, because then no one but you will be able to see it.

If there are no crash reports, then Safari isn't crashing, or at least it hasn't done so recently. Get it to crash again and post the report. If it's not actually crashing, then please clarify your description of the problem.

Startup – Computer restarts by itself – Yosemite

Please read this whole message before doing anything.

This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.

The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.

Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem.

Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.

Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.

The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.

Test while in safe mode. Same problem?

After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Try running this program and then copy and paste the output in a reply. The program was created by Etresoft, a frequent contributor.  Please use copy and paste as screen shots can be hard to read. Click “Share Report” button in the toolbar, select “Copy to Clipboard” and then paste into a reply. This will show what is running on your computer. No personal information is shown.
  

Etrecheck – System Information

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.

The test works on OS X 10.8 ("Mountain Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.

Don't be put off by the complexity of these instructions. The procedure is easy to do right, but it's also easy to do wrong, so I've made the instructions very detailed. You do harder tasks with the computer all the time.

2. If you don't already have a current backup, please back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.

There are ways to back up a computer that isn't fully functional. Ask if you need guidance.

3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.

You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.

In this case, however, there are ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone who understands the code can verify what it does.

You may not be able to understand the script yourself. But variations of it have been posted on this website many times over a period of years. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.

Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.

4. Here's a general summary of what you need to do, if you choose to proceed:

☞ Copy the text of a particular web page (not this one) to the Clipboard.

☞ Paste into the window of another application.

☞ Wait for the test to run. It usually takes a few minutes.

☞ Paste the results, which will have been copied automatically, back into a reply on this page.

These are not specific instructions; just an overview. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait, paste again. You don't need to copy a second time.

5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is intermittently slow, run the test during a slowdown.

You may have started up in safe mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual before running it. If you can only test in safe mode, do that.

6. If you have more than one user, and only one user is affected by the problem,, and the affected user is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.

7. Load this linked web page (on the website "GitHub") in Safari. Press the key combination command-A to select all the text, then copy it to the Clipboard by pressing command-C.

8. Launch the built-in Terminal application in any one of the following ways:

☞ Enter the first few letters of its name ("Terminal") into a Spotlight search. Select it in the results (it should be at the top.)

☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing command-V, then press return. The text you pasted should vanish immediately.

9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.

If the test is taking much longer than usual to run because the computer is very slow, you might be prompted for your password a second time. The authorization that you grant by entering it expires automatically after five minutes.

If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.

10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:

    Test started

        Part 1 of 4 done at: … sec
        …
        Part 4 of 4 done at: … sec

    The test results are on the Clipboard.

    Please close this window.

The intervals between parts won't be exactly equal, but they give a rough indication of progress.

Wait for the final message "Please close this window" to appear—again, usually within a few minutes. If you don't see that message within about 30 minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it. Then go to the next step. You'll have incomplete results, but still something.

In order to get results, the test must either be allowed to complete or else manually stopped as above. If you close the Terminal window while the test is still running, the partial results won't be saved.

11. When the test is complete, or if you stopped it manually, quit Terminal. The results will have been saved to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.

At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "close this window" message. Please wait for it and try again.

If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.

12. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the software that runs this website. Please post the test results on Pastebin, then post a link here to the page you created.

If you have an account on Pastebin, please don't select Private from the Paste Exposure menu on the page, because then no one but you will be able to see it.

13. When you're done with the test, it's gone. There is nothing to uninstall or clean up.

14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.

15. The linked UNIX shell script bears a notice of copyright. Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

There's al kind of stuff on your Mac that should go: the adware for instance, and CleanMyMac. But I don't think these are causing the crashes. My two cents: https://www.apple.com/support/macbookpro-videoissues/