-
All replies
-
Helpful answers
-
Jul 26, 2016 1:10 PM in response to jonhyleoby lllaass,Updated from what?
Does the card work in another computer?
Have you tried other cards?
What does Disk Utility list about the card?
-
Jul 26, 2016 1:24 PM in response to lllaassby jonhyleo,Updated from the Mac App Store.
The card work fine in my Macbook Air.
I haven't tried other cards.
Disk Utility recognizes the SD Card but i cant erase or format it
-
Jul 26, 2016 2:14 PM in response to jonhyleoby lllaass,Updated from what OSX version?
Try inserting/removing the card a half dozen or so times.
Also try wigging the card in the slot.
Next:
- Try resetting the SMC and NVRAM/PRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
https://support.apple.com/en-us/HT201295
About NVRAM and PRAM
https://support.apple.com/en-us/HT204063
- Try starting in Safe Mode
OS X: What is Safe Boot, Safe Mode?
Does it work in Safe Mode?
https://support.apple.com/en-us/HT201262
- Boot to Recovery and repair the startup disk
OS X: About OS X Recovery - Apple Support
https://support.apple.com/en-us/HT201314
Does it work in Recovery mode?
- If it works in Recovery mode that rules out a hardware problem. If it is repairable reinstall the OSX
How to reinstall OS X on your Mac - Apple Support
https://support.apple.com/en-us/HT204904
- If you do not have a backup use disk utility to restore the internal disk to an external disk so you can try to recover data.
Then format the startup disk and do a fresh install of OSX
-
Jul 28, 2016 4:08 PM in response to lllaassby jonhyleo,Thank you for you help and your time.
I've solved the issue with the SD card reader using this solution posted in other thread:
"...there is a small arm in the reader that gets pushed when the switch on the card is set to lock. That's how the system knows when it shouldn't write to the SD card.
I looked at the small gap on the SD reader.
On the right hand side (Closest to the first USB port) there is a small silver arm that you can see. I simply pushed it back in with a paper clip, and now my SD reader recognizes the same card as Read/Write."