color bar line on start up, then black screen, then startup is fine

macOS Sierra - macOS 10.12 Beta (16A294a)

MacBook Pro (15-inch, Early 2011)

2.2GHz MacBook Pro (MC723LL/A)

Intel Core i7

Intel HD Graphics 3000 -512MB and AMD Radeon HD 6750M (1024MB) with automatic graphics switching

Processor: 2.2GHz

Memory 16GB 1333 MHz DDR3

Start Up Disk: 1TB - Samsung 850 SSD

Graphics - Intel HD Graphics 3000 512mb & AMD Radeon HD 6750M - 1024 MB


Here is the situation - When I initially push the power button - the screen comes on, apple logo come up, start up bar starts filling in across the screen and at the 1/2 way point I get an odd color line (pic 1).


Then the screen goes black for a second or 2 (pic 2).


Then boot up bar comes back on and completes. (pic 3)


Then I can log in. (pic 4).


Other than the log in issue, there does not seem to be any other issues. Systems has passed diagnostics. I have reset NVRAM & SMC.


Anyone know what is going on?


Any help is appreciated. I purchased the MBP, used, from a seller on Amazon.


Thank you.User uploaded fileUser uploaded fileUser uploaded fileUser uploaded file

Thank You.

iMac, OS X Yosemite (10.10.1), 32G Ram, i5 Intel Processor

Posted on Aug 16, 2016 10:10 AM

Reply
7 replies

Feb 13, 2017 3:29 PM in response to Bman2912

Did you ever figure this out Bman?!? I've had this issue on 2 DIFFERENT MacBook Pros! Both of them had the same result. The issue with the horizontal line and black screen at start up DID NOT happen in either MBP when I used a standard SATA hard drive, BUT when I used a SSD (solid state hard drive) in both MBPs the issue occurred with the horizontal line and black screen at the startup. WHY?!? This shouldn't be happening.


I've tried upgrading firmware on the SSDs and there don't seem to be any other troubleshooting methods available. Please advise.

Apr 26, 2017 9:45 PM in response to iwidesign

HI, I had this same problem with my MacBook Pro and MacOS Sierra (software update). Lines running across the second grey screen and getting frozen. I tried everything and nothing worked but reinstalling the previous operating system.

How to do it? Press option + command + R when restarting and the internet system recovery will install the operating system that suits your computer.

good luck!

Ceci

Oct 20, 2016 9:23 AM in response to Bman2912

I had this issue too but it is now resolved at the Apple store. They had seen it before on older hardware that was upgraded to Sierra with FireVault turned on and occurs when the OS is switching graphics modes. I just had my logic board replaced so wanted it resolved.


We tried turning off FireVault but the issue was still there. They then successfully installed a fresh copy of an Mavericks and the issue was gone. Then they installed a fresh copy of Sierra and the issue was still gone. Now I have re-enabled FireVault and the issue is still gone.

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

color bar line on start up, then black screen, then startup is fine

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.