Late 2007 MacBook not charging and not recognizing battery

I recently started having trouble with my macbook charging, so I purchased a new battery. The new battery is also not working. I followed the troubleshooting steps (i.e., resetting PRAM and SMC). I still have nothing. The battery icon displays an "X" and reads that no battery is available. When I open the system preferences (power option), I do not see battery information.


The light on my magsafe adapter is typically green; however, it was red for a brief period--then back to green. I tried cleaning the ports, etc. I tried a friend's charger--still nothing. Could I possibly need a higher wattage charger? How can I tell what wattage my current charger is putting out? Can anyone offer any suggestions? I have spent several days reading the forums, etc.


Thank you for any advice.


RyanUser uploaded file

MacBook (13-inch Mid 2007)

Posted on Aug 26, 2016 9:27 AM

Reply
2 replies

Aug 27, 2016 11:34 PM in response to Rmandree

There is a chance the 'MagSafe Board' may be defective, that is

a name for the DC-in Board which includes circuitry that allows

the MagSafe adapter to power the computer and charge battery

at the same time. It can be partially defective; or appear to be

some other issue. The power management reset, SMC can help;

also the magsafe adapter may have defects. And a battery may

show low-cycles yet be well beyond a useful existence.


If your computer is identified by any of these numbers &/or specs

then yours is a 13-inch Late 2007 MacBook (not pro) if you have

documentation of the original (sales) order number that helps, too.


Introduced November 2007

Discontinued February 2008

Model Identifier MacBook3,1

Model Number A1181

EMC 2200

Order Number MB061LL/B (White), MB062LL/B (White), MB063LL/B (Black)


The part and instructions for replacement of the part are available

in an iFixit repair guide for older macbook (2006-2010) model...


Assuming you've identified the MacBook correctly, the guide to use

for the model suggested, would be based on identifiers noted above:


• MacBook Core2Duo repair guide -- (includes Late 2007 13-inch model)

https://www.ifixit.com/Device/MacBook_Core_2_Duo

"Model A1181 / 1.83, 2, 2.1, 2.16, 2.2, or 2.4 GHz Core 2 Duo processor"

The 'model number' is about least helpful to cite, because so many builds

over a few years used that number, among other different spec numbers.


If the problem is the MagSafe Board, note details & difficulty:

https://www.ifixit.com/Guide/MacBook+Core+2+Duo+Magsafe+Board+Replacement/520


Detailed care in removal and replacement so as to not cause any other damages

to the electrical or physical components, is necessary; some school age youth

have been able to replace the MagSafe Board in as little as 15 minutes. If you

are not skilled, an Apple Authorized Service Provider could test, diagnose, &

replace the necessary parts. Other contributing factors may be involved, btw.


While an Apple store Genius may be helpful to troubleshoot, with older Macs,

they tend to not offer repair; yet may suggest off-site third party AASP repairer.


They have their methods; so you may end up going to an independent AASP

anyway. When the computer is open, is also a good time to consider items that

may need replacement. Some of the cost to access the inside, is already involved.



So you may or may not be up to the levels of difficulty and methods involved as

suggested or outlined in the iFixit repair guide that covers your vintage Macbook.


In any event...

Good luck & happy computing! 🙂

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

Late 2007 MacBook not charging and not recognizing battery

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.