try cleaning or blowing it out and make sure your head phones are ok i have had thad isue most times a can of air will blow it out and no more static
try cleaning or blowing it out and make sure your head phones are ok i have had thad isue most times a can of air will blow it out and no more static
Try pushing the headphones in more that’s what I had to do today for mine
Try rubbing alcohol on a cotton swap and turn it while inserted in the headphone jack. I do this while the phones on but probably safer while it's powered off. Works for me.
If your headphones don‘t work with your iPhone, iPad, or iPod touchCheck for debris, damage, or loose connections
- Check for debris in the headphone port on your iPhone, iPad or iPod touch.
- Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage.
- Look for debris on the meshes in each earbud. To remove debris, gently brush all openings with a small, soft-bristled brush that's clean and dry.
- Firmly plug your headphones back in. If your iOS device has a case, remove the case to get a firm connection.
Looks like you need a new headphone jack. The charging port, speaker and headphone jack are connected together. There not hard to change yourself. Cost about 15 bucks on eBay for the part and a quick you tube video on how to install. Sorry looks like you exhausted every other options.
That didn't work either. It works if I turn the headphone plug around or wiggle it a little
Yea it happens with other headphones as well.
I'm assuming you hear a static noise in your headphone.
Is your iPhone charging its battery whenever you hear that static noise?
(I had that issue with my iPhone 5s.)
Yes it makes the noise through the headphones. No not when it's charging
I push it all the way in but still when I'm on a phone call. If I turn the plug where headphone goes in. You hear the scratchy noise
Unfortunately I believe so. Thank you for the help and advice
when i plug in headphones it makes a static noise
