Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Question:

Question: iMac won’t start back up, just updated, what do I do?

My iMac won’t start up after I updated it. Keep shutting off after the bar under the apple symbol has been filled.

What do I do?

Posted on

Reply

Page content loaded

Nov 12, 2017 11:35 AM in response to HanneIBM In response to HanneIBM

Possible Fixes for High Sierra

You should try each, one at a time, then test to see if the problem is fixed before going on to the next.


Be sure to backup your files before proceeding if possible.


  1. Shutdown the computer, wait 30 seconds, restart the computer.
  2. Resetting your Mac’s PRAM and NVRAM
  3. Reset the System Management Controller (SMC)
  4. Start the computer in Safe Mode, then restart normally. This is slower than a standard startup.
  5. Repair the disk by booting from the Recovery HD. Immediately after the chime hold down the Command and R keys until the Utility Menu appears. Choose Disk Utility and click on the Continue button. Select the indented (usually, Macintosh HD) volume entry from the side list. Click on the First Aid button in the toolbar. Wait for the Done button to appear. Quit Disk Utility and return to the Utility Menu. Restart the computer from the Apple Menu.
  6. Create a New User Account Open Users & Groups preferences. Click on the lock icon and enter your Admin password when prompted. On the left under Current User click on the Add [+] button below Login Options. Setup a new Admin user account. Upon completion log out of your current account then log into the new account. If your problems cease, then consider switching to the new account and transferring your files to it - Transferring files from one User Account to another.
  7. Download and Install 10.13.1 High Sierra Update
  8. Reinstall OS X by booting from the Recovery HD using the Command and R keys. When the Utility Menu appears select Reinstall OS X then click on the Continue button.
  9. Erase and Install OS X Restart the computer. Immediately after the chime hold down the CommandandRkeys until the Apple logo appears. When the Utility Menu appears:
  1. Select Disk Utility from the Utility Menu and click on Continue button.
  2. When Disk Utility loads select the drive (out-dented entry) from the Device list.
  3. Click on the Erase icon in Disk Utility's toolbar. A panel will drop down.
  4. Set the Format type to Mac OS Extended (Journaled.)
  5. Click on the Apply button, then wait for the Done button to activate and click on it.
  6. Quit Disk Utility and return to the Utility Menu.
  7. Select Install OS X and click on the Continue button.

Nov 12, 2017 11:35 AM

Reply Helpful

Nov 12, 2017 12:05 PM in response to HanneIBM In response to HanneIBM

I don't think so because if you did you would have either fixed the problem or erased the drive and reinstalled macOS. This should have fixed it.


I have nothing more to suggest because you have not provided any added information relating to what you did and what results you received. We are neither clairvoyant nor mind readers.

Nov 12, 2017 12:05 PM

Reply Helpful
User profile for user: HanneIBM

Question: iMac won’t start back up, just updated, what do I do?