10.13.3 wifi issue (doesn't automatically connect)

I just already updated to 10.13.3

But everytime I open my macbook air from sleep mode WiFi doesn't automatically connect.

Sometimes need to restart WiFi to make it connect.


Anyone got the same problem?? 😕

MacBook Air, macOS High Sierra (10.13.3), Macbook Air early 2014

Posted on Jan 25, 2018 7:23 AM

Reply
Question marked as Top-ranking reply

Posted on Mar 9, 2018 7:19 AM

I have a MacBook Pro (13-inch, 2017, Two Thunderbolt 3 ports, no Touch Bar). I have found a good solution that works for me every time this happens. The answer is to reset your System Management Controller (SMC). The full article can be found here: https://www.macworld.com/article/2881177/macs/how-to-reset-your-macs-nvram-pram- and-smc.html


Reset the SMC

Yet another component of your Mac’s hardware that stores crucial settings is the System Management Controller (SMC), a circuit that deals with power management, temperature monitoring and fan control, status lights, keyboard backlights, and a few other components. If your SMC becomes confused, you could experience problems like excessive fan noise, slow performance even though Activity Monitor doesn’t show the CPU being overtaxed, apps that take forever to launch, batteries that don’t charge correctly, problems with sleep or wake, and so on. (You can see a longer list on this Apple support page.) As with zapping the NVRAM, resetting the SMC to factory defaults may resolve these problems.


Apple says you shouldn’t reset the SMC without first trying other troubleshooting tasks, such as force-quitting problematic apps and restarting your Mac. However, Apple doesn’t mention any negative consequences of resetting the SMC, nor any way to determine for sure if the SMC is glitchy without resetting it and noticing that the problem went away. I’ve reset my Macs’ SMCs many times with no apparent ill effects, and on occasion that did in fact turn out to be the solution to a problem.

Before you can reset your SMC, you must shut down your Mac. After that, the procedure varies depending on the type of Mac you have.

  • Desktop Macs: Disconnect the power cord (either from the Mac or from the AC outlet). Wait 15 seconds and plug it back in. Then wait another 5 seconds and turn the Mac back on.
  • Portable Macs with non-removable batteries: Shut down and unplug your Mac. On the built-in keyboard, press and hold the Shift, Option, and Control keys on the left side and press the power button and hold all of these down for 10 seconds, then release the keys. Connect the power adapter and then turn the Mac on normally.
  • Portable Macs with removable batteries: Shut down your Mac. Disconnect the power cord and remove the battery. Press the power button, hold it for 5 seconds, and then let go. Put the battery back in, reconnect the power cord, and turn the Mac on normally.


User uploaded file

25 replies
Question marked as Top-ranking reply

Mar 9, 2018 7:19 AM in response to tp1033

I have a MacBook Pro (13-inch, 2017, Two Thunderbolt 3 ports, no Touch Bar). I have found a good solution that works for me every time this happens. The answer is to reset your System Management Controller (SMC). The full article can be found here: https://www.macworld.com/article/2881177/macs/how-to-reset-your-macs-nvram-pram- and-smc.html


Reset the SMC

Yet another component of your Mac’s hardware that stores crucial settings is the System Management Controller (SMC), a circuit that deals with power management, temperature monitoring and fan control, status lights, keyboard backlights, and a few other components. If your SMC becomes confused, you could experience problems like excessive fan noise, slow performance even though Activity Monitor doesn’t show the CPU being overtaxed, apps that take forever to launch, batteries that don’t charge correctly, problems with sleep or wake, and so on. (You can see a longer list on this Apple support page.) As with zapping the NVRAM, resetting the SMC to factory defaults may resolve these problems.


Apple says you shouldn’t reset the SMC without first trying other troubleshooting tasks, such as force-quitting problematic apps and restarting your Mac. However, Apple doesn’t mention any negative consequences of resetting the SMC, nor any way to determine for sure if the SMC is glitchy without resetting it and noticing that the problem went away. I’ve reset my Macs’ SMCs many times with no apparent ill effects, and on occasion that did in fact turn out to be the solution to a problem.

Before you can reset your SMC, you must shut down your Mac. After that, the procedure varies depending on the type of Mac you have.

  • Desktop Macs: Disconnect the power cord (either from the Mac or from the AC outlet). Wait 15 seconds and plug it back in. Then wait another 5 seconds and turn the Mac back on.
  • Portable Macs with non-removable batteries: Shut down and unplug your Mac. On the built-in keyboard, press and hold the Shift, Option, and Control keys on the left side and press the power button and hold all of these down for 10 seconds, then release the keys. Connect the power adapter and then turn the Mac on normally.
  • Portable Macs with removable batteries: Shut down your Mac. Disconnect the power cord and remove the battery. Press the power button, hold it for 5 seconds, and then let go. Put the battery back in, reconnect the power cord, and turn the Mac on normally.


User uploaded file

Jan 27, 2018 6:01 AM in response to tp1033

I have the same issue since upgrading to 10.3.3 on my Retina 15-inch Late 2013 MacBook Pro. Everything was fine with previous MacOS versions.

It's not specific to my home AirPort, either. My MacBook goes with me to work every day, and it is very slow to connect (if ever) with my work access point (Ubiquiti).

The wifi menu connect list doesn't populate immediately, then my Personal Hotspot is the 1st to show up. It stays like that for a while before the list slowly populates with the wifi in the area. More often than not, it will not automatically connect to my known networks.

Feb 6, 2018 1:25 AM in response to tp1033

same issue here, really frustrating.


(To be honest, I'm getting tired of what Apple does under the name of sw development. Every time a new SW update arrives on iPhone or on Mac, I'm praying for not breaking working features with no luck. There are 3 new bugs for every fixed problem. I'm seriously wondering about breaking with this ecosystem, and finding something else...)

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

10.13.3 wifi issue (doesn't automatically connect)

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.