Can't get passed white screen

If you have a Late 2011 or later model you can do this:

Internet/Network Recovery of El Capitan or Later on a Clean Disk

1. Restart the computer. Immediately after the chime hold down the (Command-Option-Shift-R) keys until a globe appears.
2. The Utility Menu will appear in from 5-20 minutes. Be patient.
3. Select Disk Utility and click on the Continue button.
4. When Disk Utility loads select the drive (usually, the out-dented entry) from the side list.
5. Click on the Erase tab in Disk Utility's main window. A panel will drop down.
6. Set the partition scheme to GUID.
7. Set the Format type to Mac OS Extended (Journaled.)
8. Click on the Apply button, then click on the Done button when it activates.
9. Quit Disk Utility and return to the Utility Menu.
10. Select Reinstall OS X and click on the Continue button.

Note:

1. To install the version of OS X that was currently installed use Command-Option-R.

2. To install the original factory version when the computer was new use Command-Option-Shift-R.

How to Fix a Mac That Stalls on the Gray Screen at Startup

Question (?) Mark, Blinking Folder, or Gray Screen at Startup

These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:

A flashing question mark or globe appears when you start your Mac

About the screens you see when your Mac starts up

In most cases, the problems may be caused by one or more of these:

a. Problems with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.

b. Boot drive's directory has been corrupted - Repair with Disk Utility.

c. Critical system files are damaged or deleted - Reinstall OS X.

d. The disk drive is physically non-functional - Replace the hard drive.

Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service. Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.

Reinstall OS X Without Erasing The drive

1. Repair the Hard Drive and Permissions

Boot from your Snow Leopard Installer disc. After the installer loads, select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities' menu. After Disk Utility loads select your hard drive entry (mfgr.'s ID and drive size) from the left side list. In the Disk Utility status area, you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the installer.

If Disk Utility reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

The main difference if you are using Lion or later is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above for Lion and later.

2. Reinstall Snow Leopard

If the drive is OK then quit Disk Utility and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system. Download and install Mac OS X 10.6.8 Update Combo v1.1.

3. Reinstall Lion or later Without Erasing The Drive

1. Restart the computer and after the chime hold down the Command and R keys until the Utility Menu appears.
2. Choose Disk Utility from the Utility Menu and click on the Continue button.
3. After Disk Utility loads select the indented (usually, Macintosh HD) entry from the side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button.
4. When the process finishes, quit Disk Utility and return to the Utility Menu.
5. Select Reinstall OS X and click on the Continue button.

Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.