How do I create a bootable external drive

Bootable USB Installers for OS X Mavericks, Yosemite, El Capitan, and Sierra

First, review this introductory article: Create a bootable installer for macOS. Second, see this How To outline for creating a bootable El Capitan installer. Simply replace the Terminal command with the one from the preceding article by copying it into the Terminal window. You will need an 8GB or larger USB flash drive that has been partitioned and formatted for use with OS X.

Drive Partition and Format

1. Open Disk Utility in the Utilities' folder.
2. After Disk Utility loads select the drive (out-dented entry with the mfg.'s ID and size) from the side list.
3. Click on the Erase tab in the Disk Utility toolbar. Name the drive, "MyVolume". <---- IMPORTANT!
4. In the drop down panel set the partition scheme to GUID. Set the Format type to Mac OS Extended (Journaled.)
5. Click on the Apply button and wait for the Done button to activate. When it does click on it.
6. Quit Disk Utility.

Create Installer

Open the Terminal in the Utilities' folder. Choose the appropriate command line (in red) depending upon what OS X installer you want. Paste that entire command line from below at the Terminal's prompt:

Command for macOS High Sierra:

sudo /Applications/Install\ macOS\ High\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ macOS\ High\ Sierra.app

Command for macOS Sierra:

sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ macOS\ Sierra.app

Command for El Capitan:

sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app

Command for Yosemite:

sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ OS\ X\ Yosemite.app

Command for Mavericks:

sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install\ OS\ X\ Mavericks.app

Press RETURN. You will be asked for your admin password. It will not echo to the Terminal window. Then press RETURN again. Wait for the return of the Terminal prompt signifying the process has completed. It takes quite some time to finish. Be patient.

Clone El Capitan and Later using Disk Utility

1. Restart the computer and after the chime press and hold down the Command and R keys until the Utility Menu appears.
2. Select Disk Utility from the Utility Menu then press the Continue button.
3. Select the destination volume from the left side list.
4. Select Restore from the Edit menu of Disk Utility. A panel will drop down.
5. Select the source volume from the drop down menu in the panel.
6. Double-check you got it right, then click on the Restore button.

Destination means an external drive. Source means the internal startup drive.

Pianomonster wrote:

Hi. Im a pro musician running MainStage and need to have a backup in case of problems. How do I make a bootable drive in case mine fails?

How to create a boot clone

I think you should be able to do it with Disk Utility. I personally use Carbon Copy Cloner. It's kind of slow working with an external hard drive, but if you have to it's tolerable.