Want to highlight a helpful answer? Upvote!

Did someone help you, or did an answer or User Tip resolve your issue? Upvote by selecting the upvote arrow. Your feedback helps others! Learn more about when to upvote >

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

User profile for user: jan006
jan006 Author
User level: Level 1
10 points

Macbook HD Upgrade

Hi everyone, I'm trying to figure out the best way to upgrade my HD on my macbook without screwing it up.

I bought a 160GB Seagate drive and an external enclosure for the stock HD from OWC. I plan on using SuperDuper to do the cloning.

Is this all I have to do? Or are there more steps?
-download SuperDuper
-Take out old hard drive and replace with new
-boot from old HD in the enclosure
-clone from enclosure to the new HD inside the MB

then all is well??

help!!

-jan

Macbook Core Duo, Mac OSX (10.4.8), 2.0Ghz, 2GB RAM Mac OS X (10.4.8)

Posted on Feb 5, 2007 5:37 PM

Reply
Question marked as Best reply
User profile for user: Kappy
Kappy
User level: Level 10
361,741 points

Posted on Feb 5, 2007 6:05 PM

Be sure you properly prep the new drive before attempting to clone.

Extended Hard Drive Preparation

1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)

2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.

3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.

4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.

5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.

6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.



Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.
View in context
12 replies
Question marked as Best reply
User profile for user: Kappy
Kappy
User level: Level 10
361,741 points

Feb 5, 2007 6:05 PM in response to jan006

Be sure you properly prep the new drive before attempting to clone.

Extended Hard Drive Preparation

1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger.)

2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.

3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.

4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.

5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.

6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.



Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.
Reply
User profile for user: Kappy
Kappy
User level: Level 10
361,741 points

Feb 6, 2007 11:42 AM in response to jan006

Yes, or you can use the Restore option of Disk Utility:

How to Clone Using Restore Option of Disk Utility

1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.

For added precaution you can boot into safe mode before doing the clone.
Reply
User profile for user: Kappy
Kappy
User level: Level 10
361,741 points

Feb 6, 2007 9:03 PM in response to jan006

I recommend you do this instead:

How to Clone Using Restore Option of Disk Utility

1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.

For added precaution you can boot into safe mode before doing the clone.
Reply

Macbook HD Upgrade

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.
Learn more Sign up