This discussion is locked
-
All replies
-
Helpful answers
Previous
Page
2
-
Mar 16, 2007 6:36 PM in response to Grant Bennet-Alderby Ann White,I had no idea the screen could be replaced. I don't know that I would ever do that, but just in case I should have the opportunity, do you know where I might find instructions--Is the complete hinged top replaced?
Ann -
Mar 16, 2007 7:45 PM in response to Ann Whiteby Grant Bennet-Alder,yes, the complete top and its hinges is the unit that is replaced. Great pictorial instructions are available thanks to this generous web vendor:
http://www.ifixit.com/Guide/Mac/PowerBook-G3-Wallstreet/Display
There are some who will replace only the display, not the entire top, but that is too much work for a machine that is getting a little old.
If your WallStreet has the display output connector, you can run an external VGA display, as long as it can run at the same resolution as the built-in screen. Oh -- I guess you're a little low on spare displays right now. -
Mar 17, 2007 5:49 AM in response to Grant Bennet-Alderby Ann White,Wow! That is amazing. I've only replaced a modem in this machine, but I do like to try working on it. I do have a later laptop so I don't know if I will spend any more on this one, but I am tempted to see what a new screen would cost. Thank you for this information.
Ann -
Mar 17, 2007 10:21 AM in response to Ann Whiteby jpl,Ann,
Just a comment on replacing the display...
If you have the 233MHz CPU without the backside L2 cache, you are stuck with using the same display. This first-generation Wallstreet 233MHz/no cache only had 2MB of VideoRAM (VRAM) and thus will not support the 13.3" and 14.1" active-matrix displays; they require the logic boards that had 4MB of VRAM. I only mention this in the event you found a great price on one of these larger displays.
You can check if you have the 233MHz CPU in the Apple System Profiler. -
Mar 17, 2007 5:45 PM in response to jplby Ann White,Yes, I am almost sure that I have the 233MHz CPU. Thanks for the warning.
Ann