help!!! native mode in logic 7pro

Question

help!!! native mode in logic 7pro

how do you activate native mode in logic 7pro .I'm useing kontrol 49 contoller by korg . I know with the korg you disable the native mode from there controller but how do you trun it back on from logic. korg states that logic is the only one that can reactivate native mode please can some one help me turn it back on .
I also downloaded logic 7 .1.1 latest control surface manual.which
did not tell you how to reactivate it.

Posted on Oct 12, 2005 4:16 PM

Reply

Answer 1

Oct 17, 2005 6:45 PM in response to jeffrey domond

I got this response from Korg today

The Kontrol 49 and Logic 7 work with a new protocol called native mode.
Native mode automatically recognizes the Kontrol 49 and maps the CC# to
the controller for you no need for editor anymore.
Now Logic has written the Native Mode to control Faders, Pans and
Transport controls, if you want to over ride this and use the editor and
manual assign the CC# then you will disengage the Native Mode by
pressing the Setting button, The Message button, Scene Button and Exit
at the same time that will disengage. Then you can go to
Preferences/Control Surfaces and rescan devices in Logic to re-engage
Native Mode.

Thank You,

Elijah
Korg USA, Inc.
Product Support

Reply