External firewire 800 disk: Raid or non Raid?
I am currently about to by a new external firwire 800 hard disk to replace my firewire 400 200GB Maxtor. I mainly use this disk for timemachine backups and all my final cut express scratch area and work area. I am working with AVCHD video and looking to expand the storage and speed of this disk. I have narrowed my options down to two. They are both high quality options. I will be buying the enclosure and hard disks seperatly to ensure I get a good enclosure and good quality hard disk drive.
Enclosure options:
1. http://www.macpower.com.tw/products/hdd3/pleiades/pd_scombo.
Pleiades Super S-Combo, FireWire 400/800, USB 2.0, and eSATA interfaces. This enclosure uses Oxford 934DSb or Oxford 924DSb chipset. This is a single drive enclosure and non Raid. I would put a 1TB disk in this enclosure.
2. http://www.macpower.com.tw/products/hddmulti/taurus/pdd_raid2
Taurus Raid II enclosure. FireWire 400/800, USB 2.0 and USB 1.0 interfaces. This enclosure uses Oxford 934DSb or Oxford 924DSb chipset. This is a dual drive enclosure and Raid 0 and 1. I would put a two 500GB disks in this enclosure. But will use with mirroring such that a copy of data will reside on each disk. Whilst this will reduce the overal capacity to 500GB I will have the extra redundancy should a drive fail. From which I can just replace the failed drive.
I am aware that using Raid mirroring will slow down the data transfer to the disk enclosure but I think this should be ok for AVCHD editing for my purposes. Cost wise there is not much difference between the two options. In both options I will go for either Seagate Baracuda drive or Samsung Spinpoint.
Would like to know what your thoughts are?
Which options would you go for?
Message was edited by: Just-Karma
iMac 2.6GHz, Mac OS X (10.5.4)