Fixed my slow iPad Wi-Fi issue, here is what I found...

I just bought Ipad 4th gen. It is soooooooooooo slooooooow when I am using wifi on it.I have a D-Link DIR 600 Firmware 2.5 version. I have unchecked the QoS on Advance Settings. But when i go to set up - wireless set up, i could see WMM checked. I couldn't figure out how to uncheck it. PLEASE HELP. I've tried unconfiguring and re configuring my router it still the same. But when i removed the password of my WIFI my Ipad worked a BIT better than previous. Then put on my wifi password again, its back to slooooooow speed 😟

I also tried connecting at other wifi spot and it still works so slowww. I am thinking of updating the software to 6.0.1 . But i am afraid it might worsen it.

Finally an actual fix!! I was even going to have my router replace thinking that it was defective. I didn't even consider disabling wmm support before because I thought it would make things worse. I haven't even wanted to use my apple tv3 because it kept making my network crash. Thank you.

I have an iPad 4th Gen and my wife has an iPad 3rd Gen both were really slow, thanks to this thread I just disabled WMM on our TP-Link TLWA-901N Ap's and they work much better, thanks :-)

I turned off the Bluetooth on the iPad and wow!!! It's fast!!

Just going to General-Reset - Reset Network Setting on the iPad will probably work and you will not lose any of your other setting. At least in I-06 .

The wifi on my 16 Gig iPad2 had become very slow. I tried updating it to iOS 6, and it completely quit working. I was about to toss it in the trash in disgust, when I saw this post. - About a month ago I had tried a bluetooth keyboard on my iPad - only once - but I left the bluetooth on. When I saw this post I turned off the bluetooth on my iPad and full wifi functionality was restored instantly.

I had slowness on iPad 4th gen also after about two weeks and was tired of the call center answer and transfers. I solve it myself today after just posting about 20 minutes ago. I just set my ip to manual setting and changed it to a higher range ip that I think other network device is not using and surprise to me in speedtest.net app went from less than (1 Mbps upload or download) to over (17Mbps download speed/ 4Mbps upload speed). Not as fast as my pc network speed but still better than before. Just make sure you have copied all the same for subnet, dns, just change the ip address itself only. Probably the ultimate solution later is to let setup DHCP server change ip address once a day🙂

Hi everyone, I am new to this so can you please bear with me.

My ipad 2 is very slow and I have run the speed test as suggested, results were

Ping. 108ms

Download. 0.23 Mbps

Upload 0.28 Mbps

Is this normal please ? I checked the QoS and this is disabled,

Thanks for any help

It's only normal if you are sharing a dial-up connection.🙂 Try changing the last octate under IP address>Static in wifi (the number on the far right) to something above 200 and below 255 like 192.168.1.201 or what ever you want. You may want to copy the Subnet Mask, Router, DNS information so that you can copy over to Static address field. Once completed, use the speedtest.net app to test again to see if that correct your high speed internet connection. If it works then you should set up lease in your router for every 23 hours to renew ip address for your internet connected devices then set back to DHCP in wifi so that to autochange IP address every 23 hours or so.

Thank you, I am on broadband via cable and using a linksys router. I think I have tried everything you said but there is no improvement,

These were results

Ping 335

Download 0.42 Mbps

Upload. 0.16 mbps

Is there anything else I should try please ?

Have you tried upgrading your firmware on your linksys router. I don't think QOS should be disabled, reset back to stock configuration after router firmware update. Are you getting fast speed on your PC using speedtest.net website? If your not getttinng fast speed then it most likely not your iPad. If your cable modem is older than 2 years then you may want to upgrade that. Mine quit every two years, luckily I had an extra that my bro gave me.

If you have fast speed on your pc, then you can try this. Other ways of using a Intel laptop as an access point is to have Intel My Wifi Utility to enable a hotspot function or ad hoc network using windows to test for your iPad to the pc. Just a thought.

@Angie: The advice you have gotten so far is not very good here. If you read through the thread you will see that various things have fixed the problem.

I would start by simplifying your router config. Turn off DHCP, assign a static IP to the iPad, turn off QoS(!!!!), turn off any form of encryption (WPA/WEP) and see if it helps. If not, then change the default channel of the router and lock the router into G-only (No A, B or N). These above things have solved the problem for many people (but not all). If this fixes your problem, then start turning on features 1 by 1 and see if you can break the iPad again.

There is always the outside chance that your iPad is broken. The best way to tell this is to connect it to a Apple Airport router and test the speeds (maybe at an Apple store?). If the iPad gets fast then you will know for sure its your router.

I even saw someone claim that when their brightness is all the way up their wifi signal goes down. Sounds crazy but maybe try it. I can tell you this for sure... QoS has been a huge issue for a lot of people so make sure its off.

Carefull Dr. that you don't bash everyone that is trying to help. Oh.. to late.

I recently upgraded my cable to Ultimate at 50mbps Dn and 5 up. I have a linksys e4200 router. All my computers and laptop are doing 50 but my Apple products Ipad and Iphones don't go higher than 18. None drop the signal but I would expect them to runa at least close to 50mbps. I called Linksys but they say it's not a problem on their end.

Any ideas??!

@Vector2nds: I have been an IT professional for 28 yrs. I am not bashing the person, I am bashing the advice given since it is not very good.