Power Mac G5 Dual 2Ghz CPU 1 error on restart after a clean install

Question

Level 1

25 points

Power Mac G5 Dual 2Ghz CPU 1 error on restart after a clean install

Hi Guys.
I got this error this morning after a clean install.
I had restarted my G5 for the first time since the clean install and a error message was displayed - black box white writing stating i need to shut down and reboot. After shutting down and rebooting the below error report was displayed.

I ran both ASD 2.5.7 and 2.5.8 both runs reported PASSED on all tests. I thought maybe it was temp related but temps are nominal and there was no ramp up in fan speed at any time. There is a temp difference though, which has been present since i got my G5.

Currently the CPUs are running as below.
CPU A 48.1
CPU B 41.6

In side is not clogged up with mounds of dust but there is some. If it was do to clogged heatsinks would not the fans ramp up to increase airflow to try and compensate?

Any ideas?

-------------------------

Fri Jun 18 10:46:56 2010
panic(cpu 1 caller 0x00B69204): "DART entry exception: HyperTransport write logical page 0x00000
"@U3.cpp:1280
Latest stack backtrace for cpu 1:
Backtrace:
0x0009AD18 0x0009B6BC 0x00029DC4 0x00B69204 0x006AB3E8 0x00FB8700 0x00355B40 0x003547BC
0x00354E58 0x000AFE54
Kernel loadable modules in backtrace (with dependencies):
com.apple.driver.AppleGPIO(1.2.0d0)@0x6a8000->0x6abfff
dependency: com.apple.driver.IOPlatformFunction(1.8.5d5)@0x6a3000
com.apple.driver.MacIOGPIO(1.2.0d0)@0xfb6000->0xfb9fff
com.apple.driver.AppleMacRISC4PE(2.0.2d9)@0xb61000->0xb6efff
dependency: com.apple.driver.IOPlatformFunction(1.8.5d5)@0x6a3000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x6ac000
Proceeding back via exception chain:
Exception state (sv=0x1279c80)
PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)

BSD process name corresponding to current thread: kernel_task

Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:37:58 PDT 2007; root:xnu-1228~1/RELEASE_PPC

y

Model: PowerMac7,3, BootROM 5.2.4f1, 2 processors, PowerPC G5 (3.0), 2 GHz, 4 GB
Graphics: kHW_NVidiaGeForce6800GTItem, GeForce 6800 GT, spdisplays agpdevice, 256 MB
Memory Module: DIMM0/J11, 1 GB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM1/J12, 1 GB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM2/J13, 1 GB, DDR SDRAM, PC3200U-30330
Memory Module: DIMM3/J14, 1 GB, DDR SDRAM, PC3200U-30330
AirPort: spairport wireless_card_type_airportextreme (0x14E4, 0x4E), Broadcom BCM43xx 1.0 (4.170.25.10)
Network Service: Ethernet, Ethernet, en0
PCI Card: usb, usb, SLOT-3
PCI Card: usb, usb, SLOT-3
PCI Card: pci1033,e0, USB Enhanced Host Controller, SLOT-3
Serial ATA Device: ST3500418AS, 465.76 GB
Serial ATA Device: STM3500418AS, 465.76 GB
Parallel ATA Device: Optiarc DVD RW AD-7200A
USB Device: Keyboard Hub, Apple, Inc., high_speed, 500 mA
USB Device: Apple Optical USB Mouse, Logitech, low_speed, 100 mA
USB Device: Apple Keyboard, Apple, Inc, low_speed, 100 mA

DualG5 2Ghz 4GB GeForce6800GT 256mb Seagate/Maxtor 2x500GB - N4100+(2.8TB Raid5), Mac OS X (10.5.8), - eMac 1Ghz + 1.25Ghz - linux satellite box - xBox 360 - Emprex ME1 + 5pc's

Posted on Jun 18, 2010 5:23 AM

Reply

Answer 1

da RayMan Author

Level 1

25 points

Jun 18, 2010 9:22 AM in response to da RayMan

Just ran TechTool Pro 4 off my 10.4.11 firewire drive and all seems ok so i am baffled.

Cache

Friday, 18 June 2010 16:53:02 Europe/London
Passed

Processor 1:

L1 Cache: 96 KB
Data: 32 KB
Instruction: 64 KB
L2 Cache: 512 KB

Processor 2:

L1 Cache: 96 KB
Data: 32 KB
Instruction: 64 KB
L2 Cache: 512 KB

Cache Check 1

This test performs routines to utilize the L1 cache.

Cache Check 2

This test performs routines to utilize the L2 cache.

Passed
Clock

Friday, 18 June 2010 16:53:02 Europe/London
Passed

Clock Speed: 2.00 GHz
Bus Speed: 1.00 GHz

Read Register Check

This test checks the clock circuitry output by requesting several thousand read commands and verifying the contents.

Write Register Check

This test checks the clock circuitry input by sending several thousand write commands and verifying that the contents of the clock registers contain what was sent by the program.

Passed
FireWire

Friday, 18 June 2010 16:53:02 Europe/London
Passed

Prolific PL3507 Combo Device: (1394-ATAPI rev1.10)

FireWire 1 Check

This test checks the system for the presence of a loaded and actively running FireWire driver.

FireWire 2 Check

This test checks the ability to read the FireWire configuration ROM of the machine.

Passed
Main Memory

Friday, 18 June 2010 16:53:02 Europe/London
Passed

DIMM0: J11
Size: 1024 MB
Type: DDR SDRAM
Speed: PC3200U-30330

DIMM1: J12
Size: 1024 MB
Type: DDR SDRAM
Speed: PC3200U-30330

DIMM2: J13
Size: 1024 MB
Type: DDR SDRAM
Speed: PC3200U-30330

DIMM3: J14
Size: 1024 MB
Type: DDR SDRAM
Speed: PC3200U-30330

10101010 Check

This test works by writing the binary pattern 10101010 consecutively throughout the memory matrix, reading and verifying each pattern after it has been written.

01010101 Check

This test works by writing the binary pattern 01010101 consecutively throughout the memory matrix, reading and verifying each pattern after it has been written.

11110000 Check

This test works by writing the binary pattern 11110000 consecutively throughout the memory matrix, reading and verifying each pattern after it has been written.

00001111 Check

This test works by writing the binary pattern 00001111 consecutively throughout the memory matrix, reading and verifying each pattern after it has been written.

11111111 Check

This test works by writing the binary pattern 11111111 consecutively throughout the memory matrix, reading and verifying each pattern after it has been written.

00000000 Check

This test works by writing the binary pattern 00000000 consecutively throughout the memory matrix, reading and verifying each pattern after it has been written.

Passed
Mathematics

Friday, 18 June 2010 16:53:02 Europe/London
Passed

AltiVec: Present

Add Subtract Check

This test performs simple addition and subtraction.

Multiply Divide Check

This test performs simple multiplication and division.

Square Root Check

This test performs square root calculations.

Round Integral Check

This test performs general mathematical rounding operations.

Truncate Integral Check

This test performs truncate operations.

Remainder Check

This test performs division tests and verifies proper remainders.

Binary Log Check

This test performs logarithmic binary calculations.

Binary Scale Check

This test performs a binary scale operation and verifies the result.

Binary To Binary Check

This test checks the result of a binary to binary register shift.

Binary To Decimal Check

This test checks the result of a binary to decimal conversion.

Passed
Network

Friday, 18 June 2010 16:53:02 Europe/London
Passed

Wireless Network Adapter (802.11g):
Vendor: Apple
Driver: AirPortPCI_MM
Model: Wireless Network Adapter (802.11g)
Link Status: Active
Link Speed: Inactive
MAC Address: 00.11.24.2C.85.92

Ethernet:
Vendor: Apple
Driver: UniNEnet
Model: Ethernet
Link Status: Active
Link Speed: 1 Gbps
MAC Address: 00.14.51.11.2D.80

Network 1 Check

This test checks the availability of network services for the system.

Network 2 Check

This test checks whether a network host name is reachable using the current network configuration.

Passed
Processor

Friday, 18 June 2010 16:53:02 Europe/London
Passed

Generation: PowerPC G5
Model: 970FX (Neo2)
Version: 3.0
Speed: 2.00 GHz
AltiVec: Present
Configuration: Dual-Processor

Memory Move Check

Floating-point move instructions copy data from one floating-point register to another altering the sign bit (bit 0).

Memory Write Check

This test does memory load tests using little-endian byte ordering.

Memory Write Check

This test does memory store tests using little-endian byte ordering.

Integer Compare Check

This test does integer comparison tests using little-endian byte ordering.

Integer Logic Check

This test compares instructions logically with the UIMM operand.

Integer Rotate Check

This test rotates the contents of a register. The result of the rotation is inserted into the target register using mask bit 1 and mask bit 2 operations.

Passed
Universal Serial Bus (USB)

Friday, 18 June 2010 16:53:02 Europe/London
Passed

USB Bus:

USB Bus:

USB Bus:

USB High-Speed Bus:
Device: Keyboard Hub

Vendor: Apple, Inc.
Device: Apple Keyboard

Vendor: Apple, Inc
Device: Apple Optical USB Mouse

Vendor: Logitech

USB High-Speed Bus:

USB Bus:

USB Bus:

USB Bus:

USB Check

Sends and receives information through the USB bus to confirm proper functionality.

Passed
Video Memory

Friday, 18 June 2010 16:53:02 Europe/London
Passed

GeForce 6800 GT:
Card Vendor: NVIDIA
VRAM (Total): 256 MB

LCD:
Maximum Resolution: 1680 x 1050
Colors Supported: Millions

LCD:
Maximum Resolution: 1280 x 1024
Colors Supported: Millions

10101010 Check

This test works by writing the binary pattern 10101010 consecutively throughout the Video Memory matrix, reading and verifying each pattern after it has been written.

01010101 Check

This test works by writing the binary pattern 01010101 consecutively throughout the Video Memory matrix, reading and verifying each pattern after it has been written.

11110000 Check

This test works by writing the binary pattern 11110000 consecutively throughout the Video Memory matrix, reading and verifying each pattern after it has been written.

00001111 Check

This test works by writing the binary pattern 00001111 consecutively throughout the Video Memory matrix, reading and verifying each pattern after it has been written.

Passed

Disk Controller

Friday, 18 June 2010 16:55:00 Europe/London
Passed

Model: ST3500418AS
Mount Point: /dev/disk1
Capacity: 465.76 GB
Writable: Yes
Ejectable: No
Removable: No
Bus: ATA
Bus Location: Internal
Revision: CC34
Socket Type: Serial ATA
Serial Number: 5VM1XLRV
Connection: Master
disk1s3: Untitled 1
disk1s5: Untitled 2

This test executes the disk controller's built-in diagnostic test.

Built-in Diagnostic <Passed>

Tests Completed
Passed

Disk Controller

Friday, 18 June 2010 16:55:00 Europe/London
Passed

Model: STM3500418AS
Mount Point: /dev/disk0
Capacity: 465.76 GB
Writable: Yes
Ejectable: No
Removable: No
Bus: ATA
Bus Location: Internal
Revision: CC35
Socket Type: Serial ATA
Serial Number: 9VM1TAEH
Connection: Master
disk0s3: Storage
disk0s5: Untitled 3
disk0s6: Untitled 4

This test executes the disk controller's built-in diagnostic test.

Built-in Diagnostic <Passed>

Tests Completed
Passed

SMART

Friday, 18 June 2010 16:55:00 Europe/London
Passed

Model: ST3500418AS
Mount Point: /dev/disk1
Capacity: 465.76 GB
Writable: Yes
Ejectable: No
Removable: No
Bus: ATA
Bus Location: Internal
Revision: CC34
Socket Type: Serial ATA
Serial Number: 5VM1XLRV
Connection: Master
disk1s3: Untitled 1
disk1s5: Untitled 2

S.M.A.R.T. stands for Self-Monitoring Analysis and Reporting Technology. This test checks and reports on the status of the S.M.A.R.T. routines built into your drive. These routines monitor important drive parameters as your drive is operating. An examination and analysis of these parameters can aid in the prediction of drive failure. This will allow you to back up your data before your drive fails and the data becomes inaccessible.

S.M.A.R.T. Self-Checks

Attribute Normal Worst Threshold Status

1 Read Raw Error Rate
117 99 6 Okay
3 Spin Up Time
98 97 0 Okay
4 Start/Stop Count
100 100 20 Okay
5 Reallocated Sectors
100 100 36 Okay
7 Seek Error Rate
77 60 30 Okay
9 Power On Hours
97 97 0 Okay
10 Spin Retry Count
100 100 97 Okay
12 Power Cycle Count
100 100 20 Okay
183 Unknown
100 100 0 Okay
184 Unknown
100 100 99 Okay
187 Unknown
100 100 0 Okay
188 Unknown
100 100 0 Okay
189 Unknown
97 97 0 Okay
190 Unknown
68 56 45 Okay
194 Temperature
32 44 0 Okay
195 HW ECC Recovered
40 26 0 Okay
197 Current Pending Sector Count
100 100 0 Okay
198 Off-Line Scan Uncorrectable Sector Count
100 100 0 Okay
199 Ultra DMA CRC Error Count (Rate)
200 200 0 Okay
240 Unknown
100 253 0 Okay
241 Unknown
100 253 0 Okay
242 Unknown
100 253 0 Okay

S.M.A.R.T. Self-Checks <Passed>

Tests Completed
Passed

SMART

Friday, 18 June 2010 16:55:00 Europe/London
Passed

Model: STM3500418AS
Mount Point: /dev/disk0
Capacity: 465.76 GB
Writable: Yes
Ejectable: No
Removable: No
Bus: ATA
Bus Location: Internal
Revision: CC35
Socket Type: Serial ATA
Serial Number: 9VM1TAEH
Connection: Master
disk0s3: Storage
disk0s5: Untitled 3
disk0s6: Untitled 4

S.M.A.R.T. stands for Self-Monitoring Analysis and Reporting Technology. This test checks and reports on the status of the S.M.A.R.T. routines built into your drive. These routines monitor important drive parameters as your drive is operating. An examination and analysis of these parameters can aid in the prediction of drive failure. This will allow you to back up your data before your drive fails and the data becomes inaccessible.

S.M.A.R.T. Self-Checks

Attribute Normal Worst Threshold Status

1 Read Raw Error Rate
116 99 6 Okay
3 Spin Up Time
98 97 0 Okay
4 Start/Stop Count
95 95 20 Okay
5 Reallocated Sectors
100 100 36 Okay
7 Seek Error Rate
68 60 30 Okay
9 Power On Hours
96 96 0 Okay
10 Spin Retry Count
100 100 97 Okay
12 Power Cycle Count
100 100 20 Okay
183 Unknown
100 100 0 Okay
184 Unknown
100 100 99 Okay
187 Unknown
100 100 0 Okay
188 Unknown
100 100 0 Okay
189 Unknown
59 59 0 Okay
190 Unknown
68 55 45 Okay
194 Temperature
32 45 0 Okay
195 HW ECC Recovered
33 16 0 Okay
197 Current Pending Sector Count
100 100 0 Okay
198 Off-Line Scan Uncorrectable Sector Count
100 100 0 Okay
199 Ultra DMA CRC Error Count (Rate)
200 200 0 Okay
240 Unknown
100 253 0 Okay
241 Unknown
100 253 0 Okay
242 Unknown
100 253 0 Okay

S.M.A.R.T. Self-Checks <Passed>

Tests Completed
Passed

Reply

Answer 2

BDAqua

Level 10

250,259 points

Jun 18, 2010 9:37 AM in response to da RayMan

The differing CPU temps are normal.

Are you saying it boots off a Firewire drive but KPs off the internal drive, or is the internal OK now?

BTW, do blow out any dust at all, besides cooling problems it can cause static electricity & shorts.

Reply

Answer 3

da RayMan Author

Level 1

25 points

Jun 18, 2010 10:13 AM in response to BDAqua

I have not had any KP's since this morning, i can reboot to either the internal 10.5.8 or the firewire 10.4.11 and all is ok now.

I hate not knowing what caused the KP. Is CPU 1 on it's way out even though it passes all tests?

I've never had any KP's when using 10.4.11 only Leopard.

But this is the first KP stating a CPU was at fault.

Reply

Answer 4

BDAqua

Level 10

250,259 points

Jun 18, 2010 10:22 AM in response to da RayMan

Might just be "one of those things" that never shows up again, but 10.5.x does press the CPUs, Video card, RAM, etc., harder that 10.4.x does.

Did you thoroughly blow out the dust yet?

Reply

Answer 5

da RayMan Author

Level 1

25 points

Jun 18, 2010 10:28 AM in response to BDAqua

I'll be stripping it down and blowing it out the best i can on Sunday. I'll take my time.

And then give Leopard another go, failing that i'll re-image my back up of 10.4.11 and see if anyone wants a retail copy of Leopard.

And start saving for a Mac Pro.

Reply