Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

What is support code -2003F ?

I tried doing an Internet Recovery and it came back with Apple.com/support -2003F. What does this mean?

Posted on May 21, 2019 3:46 PM

Reply
Question marked as Best reply

Posted on May 21, 2019 4:05 PM

In Internet Recovery, these low negative thousands error messages indicate that your provided Wi-Fi Network is inadequate in some fashion, and cannot be used (for this purpose) in its current state.


Common problems include:

Hidden Network-name

required use of a proxy server to get Internet access

required use of a login page to get Internet access

Use of a login server or certificate to get Internet access

Use of PPPoE in the Mac to get Internet access (typically only applies to DSL)

Use of Fixed IP address rather than good old DHCP

Variance of the time by more than five minutes

Failure of Router to provide workable DNS server addresses, or providing 0.0.0.0 [may produce -2002f]


If you have an Ethernet port, you may in some cases be able to move your Mac close to the Router and connect to the Router using Ethernet.


The higher the number, the more obscure the problem.


Also, make certain the Date&Time and Time Zone are correct within 5 minutes.


1 reply
Question marked as Best reply

May 21, 2019 4:05 PM in response to Bigpuppy

In Internet Recovery, these low negative thousands error messages indicate that your provided Wi-Fi Network is inadequate in some fashion, and cannot be used (for this purpose) in its current state.


Common problems include:

Hidden Network-name

required use of a proxy server to get Internet access

required use of a login page to get Internet access

Use of a login server or certificate to get Internet access

Use of PPPoE in the Mac to get Internet access (typically only applies to DSL)

Use of Fixed IP address rather than good old DHCP

Variance of the time by more than five minutes

Failure of Router to provide workable DNS server addresses, or providing 0.0.0.0 [may produce -2002f]


If you have an Ethernet port, you may in some cases be able to move your Mac close to the Router and connect to the Router using Ethernet.


The higher the number, the more obscure the problem.


Also, make certain the Date&Time and Time Zone are correct within 5 minutes.


What is support code -2003F ?

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.