Slow OS After Wake From Sleep (Clamshell)

I need some help. I'm not sure what to do at this point...and this is getting FRUSTRATING. Maybe someone can help? 😀 


So...I have a 2016 MBP with Touch Bar. I was having issues with the system files taking up 340GB of space, so I did a clean install of Mojave and loaded what I needed after the fact. Now I have just under 400GB free of my 512GB SSD. So that's good.


I run my MBP through a Belkin Thunderbolt 3 dock that has may peripherals attached. It is connected to an external USB hub that has a DVD drive and two HD's connected as well as a SD card reader. The dock drives two LG 4K displays. I have had flickering issues...but that's another, smaller point. The MBP is running in clamshell mode and connected to the dock via a Thunderbolt 3 cable.


The computer runs great upon first boot. However, I will leave for lunch or for a meeting or something and when I come back to wake from sleep...the computer is just SLOW. Launchpad takes over 10 seconds to load and close. Apps take a LONG time to load. It's almost impossible to go between full-screen apps. I've looked at the Activity Monitor and don't see anything really taxing the system. I will say I have about 14GB of RAM in use...not sure why.


Anyway...any suggestions or clarifying questions? Thanks in advance for whatever help you can give.

MacBook Pro 15", macOS 10.14

Posted on Jun 5, 2019 10:34 AM

Reply

Similar questions

4 replies

Jun 5, 2019 10:59 PM in response to bigdog51421

It could be an issue with the dock, hub, or one of your other connected devices especially the USB hard drives. I would probably try ejecting the external drives first whenever you leave for lunch or a meeting to see if it solves the problem. If not, then just start going through each device in a similar manner.


Do your external devices have their own power adapters? Are you at least using a powered USB3 hub with UASP support?

Jun 6, 2019 8:28 AM in response to HWTech

I finally got an error with a report...here's the top header:


UUID: 821224EF-F4CA-4AAD-A42B-D4C94E7C788A


Stackshot Reason: Wake transition timed out after 180 seconds while calling power state change callbacks. Suspected bundle: com.apple.iokit.IOGraphicsFamily. Thread 0xc0036.


Failure code:: 0x00000002 00000027




================================================================


Date/Time:       2019-06-06 10:12:51 -0400


OS Version:      ??? ??? (Build ???)


Architecture:    x86_64


Report Version:  28




Data Source:     Stackshots


Shared Cache:    0x89da000 0C10BFF4-4E3C-3DE8-B088-395B0D67932F




Event:           Sleep Wake Failure


Duration:        0.00s


Steps:           1




Time Awake Since Boot: 34000s








Process:         kernel_task [0]


UUID:            7C8BB636-E593-3CE4-8528-9BD24A688851


Path:            /System/Library/Kernels/kernel


Architecture:    x86_64


Version:         Darwin Kernel Version 18.6.0: Thu Apr 25 23:16:27 PDT 2019; root:xnu-4903.261.4~2/RELEASE_X86_64


Footprint:       51.81 MB


Start time:      2019-06-06 10:12:51 -0400


End time:        2019-06-06 10:12:51 -0400


Num samples:     1 (1)

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

Slow OS After Wake From Sleep (Clamshell)

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.