WiFi drivers gone

I have recently got a Linksys Ethernet to USB adapter, and when I installed the Mac drivers for it, my WiFi stopped working.


It’s the infamous “No hardware installed”, but it isn’t physically broken, since when I started up the recovery assistant (CMD+R) it was working.


I have tried resetting the PRAM and SMC already, but no dice.


I have also tried to find the original drivers for the network/airport card but I couldn’t find any.


Anyone know what i should do next?


MacBook Pro 13", macOS 10.14

Posted on Dec 26, 2019 1:08 AM

Reply
Question marked as Top-ranking reply

Posted on Dec 27, 2019 1:48 AM

Merobieboy Said:

[...]I want my wireless network card to function, because it doesn’t right now.

———-


You Need to Reinstall the macOS:

Reinstalling the macOS does not rid of the install, it just fixes everything need be, by reinstalling drivers and moving items to their required locations. So, reinstall it.


To Install - Use a USB Bootable Installer:

Being that Wi-Fi is not working, the alternative way is to install this using a USB Bootable Installer. Create it using Terminal on this Mac. Enter the command provided in the following link that pertains to the macOS that is currently installed on this Mac. Use a USB Flash Drive of 8GB for this.


Go Here for the Command: How to create a bootable installer for macOS - Apple Support

7 replies
Question marked as Top-ranking reply

Dec 27, 2019 1:48 AM in response to Merobieboy

Merobieboy Said:

[...]I want my wireless network card to function, because it doesn’t right now.

———-


You Need to Reinstall the macOS:

Reinstalling the macOS does not rid of the install, it just fixes everything need be, by reinstalling drivers and moving items to their required locations. So, reinstall it.


To Install - Use a USB Bootable Installer:

Being that Wi-Fi is not working, the alternative way is to install this using a USB Bootable Installer. Create it using Terminal on this Mac. Enter the command provided in the following link that pertains to the macOS that is currently installed on this Mac. Use a USB Flash Drive of 8GB for this.


Go Here for the Command: How to create a bootable installer for macOS - Apple Support

Dec 26, 2019 1:56 AM in response to Merobieboy

Is this the Linksys adaptor you've fitted?:


If so, then you need to follow this instruction (scroll down to the OSX instruction).

Hopefully, your laptop, if that's what you are connecting to the router, has the necessary USB3 sockets.

https://www.linksys.com/us/support-article?articleNum=139086


Only certain MacBook Pro's have the necessary USB 3.0 ports: https://www.ifixit.com/Answers/View/289096/Where+are+the+USB+3.0+ports

Dec 26, 2019 4:27 AM in response to Merobieboy

OK, we've established that, but your model doesn't have built in ethernet, and the recommendations are that you purchase an Apple (or other third party) Thunderbolt to Gigabit Ethernet adaptor instead.


These are the necessary specs for your laptop.


This probably doesn't help given that you have already purchased the Linksys adaptor.


These may be what you need,

https://www.amazon.co.uk/s?k=Thunderbolt+to+gigabit+ethernet+adaptor&ref=nb_sb_noss_2

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

WiFi drivers gone

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.