Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

User profile for user: jompele
jompele Author
User level: Level 1
4 points

Network issues after macOS Catalina upgrade

Hi,


After installing the macOS Catalina, I have been facing some issues with my mid 2012 MBP. First and the most annoying issue is that for some unknown reason the webpages just stop loading. Everything works fine until it just stops loading and seems to load to infinity, no "No network connection" etc, it just keeps loading and this is true for all browsers, not just Safari. I have been trying the tips suggested here in the earlier posts, however in most cases there has been a "No network connection" associated with the issue and those tips haven't helped. I can use the internet normally with other computers on the same wifi, so the problem only exists with the Mac. This usually leads to having to force the Mac to shut down by keeping the power button pressed and then starting it again, after which it works again for some time.


What forces me to reboot my Mac by holding the power button is that after the update to macOS Catalina restarting via the Apple menu is not working anymore, this is true to shut down as well. It (usually) quits all the apps and the Finder bars disappear, but after that it gets stuck and just shows the wallpaper to eternity.


All the help will be highly appreciated, if nothing helps I think I will be forced to use the Time machine and restore the Mojave backup.


Thanks!

MacBook Pro 13", macOS 10.15

Posted on Feb 2, 2020 9:16 PM

Reply
Question marked as Best reply
User profile for user: Kappy
Kappy
User level: Level 10
361,765 points

Posted on Feb 3, 2020 9:31 AM

.fA Troubleshooting Procedure that may Fix Problems with macOS El Capitan or Later


You should try each, one at a time, then test to see if the problem is fixed before going on to the next.


    Be sure to backup your files before proceeding if possible.


  1. Shutdown the computer, wait 30 seconds, restart the computer.
  2. Disconnect all third-party peripherals.
  3. Resetting your Mac's PRAM and NVRAM
  4. Reset the System Management Controller (SMC)
  5. Reset your Startup Disk and Sound preferences, if needed, after resetting the PRAM.
  6. Test in safe mode to see if the problem persists, then restart normally.  Use safe mode to isolate issues with your Mac and Playing Safe - what does Safe mode do?
  7. Repair the disk by booting from the Recovery HD. Immediately after the chime hold down the Command and R keys until the Utility Menu appears. Choose Disk Utility and click on the Continue button. Select the indented (usually, Macintosh HD) volume entry from the side list.  Click on the First Aid button in the toolbar. Wait for the Done button to appear. Quit Disk Utility and return to the Utility Menu. Restart the computer from the Apple Menu.
  8. Repair permissions on the Home folder: Resolve issues caused by changing the permissions of items in your home folder.
  9. Create a New User Account Open Users & Groups preferences. Click on the lock icon and enter your Admin password when prompted. On the left under Current User click on the Add [+] button under Login Options. Setup a new Admin user account. Upon completion log out of your current account then log into the new account. If your problems cease, then consider switching to the new account and transferring your files to it - Transferring files from one User Account to another.
  10. Reinstall OS X by booting from the Recovery HD using the Command and R keys. When the Utility Menu appears select Install OS X then click on the Continue button.
  11. Erase and Install OS X Restart the computer. Immediately after the chime hold down the Command and R keys until the Apple logo appears. When the Utility Menu appears:


     1. Select Disk Utility from the Utility Menu and click on the Continue button.

     2. When Disk Utility loads select the drive (out-dented entry) from the Device list.

     3. Click on the Erase button in Disk Utility's toolbar. A panel will drop down.

     4. Set the Format type to APFS (for SSDs only) or Mac OS Extended (Journaled.)

     5. Click on the Apply button, then wait for the Done button to activate and click on it.

     6. Quit Disk Utility and return to the Utility Menu.

     7. Select Install OS X and click on the Continue button.


View in context

Similar questions

2 replies
Question marked as Best reply
User profile for user: Kappy
Kappy
User level: Level 10
361,765 points

Feb 3, 2020 9:31 AM in response to jompele

.fA Troubleshooting Procedure that may Fix Problems with macOS El Capitan or Later


You should try each, one at a time, then test to see if the problem is fixed before going on to the next.


    Be sure to backup your files before proceeding if possible.


  1. Shutdown the computer, wait 30 seconds, restart the computer.
  2. Disconnect all third-party peripherals.
  3. Resetting your Mac's PRAM and NVRAM
  4. Reset the System Management Controller (SMC)
  5. Reset your Startup Disk and Sound preferences, if needed, after resetting the PRAM.
  6. Test in safe mode to see if the problem persists, then restart normally.  Use safe mode to isolate issues with your Mac and Playing Safe - what does Safe mode do?
  7. Repair the disk by booting from the Recovery HD. Immediately after the chime hold down the Command and R keys until the Utility Menu appears. Choose Disk Utility and click on the Continue button. Select the indented (usually, Macintosh HD) volume entry from the side list.  Click on the First Aid button in the toolbar. Wait for the Done button to appear. Quit Disk Utility and return to the Utility Menu. Restart the computer from the Apple Menu.
  8. Repair permissions on the Home folder: Resolve issues caused by changing the permissions of items in your home folder.
  9. Create a New User Account Open Users & Groups preferences. Click on the lock icon and enter your Admin password when prompted. On the left under Current User click on the Add [+] button under Login Options. Setup a new Admin user account. Upon completion log out of your current account then log into the new account. If your problems cease, then consider switching to the new account and transferring your files to it - Transferring files from one User Account to another.
  10. Reinstall OS X by booting from the Recovery HD using the Command and R keys. When the Utility Menu appears select Install OS X then click on the Continue button.
  11. Erase and Install OS X Restart the computer. Immediately after the chime hold down the Command and R keys until the Apple logo appears. When the Utility Menu appears:


     1. Select Disk Utility from the Utility Menu and click on the Continue button.

     2. When Disk Utility loads select the drive (out-dented entry) from the Device list.

     3. Click on the Erase button in Disk Utility's toolbar. A panel will drop down.

     4. Set the Format type to APFS (for SSDs only) or Mac OS Extended (Journaled.)

     5. Click on the Apply button, then wait for the Done button to activate and click on it.

     6. Quit Disk Utility and return to the Utility Menu.

     7. Select Install OS X and click on the Continue button.


Reply

Network issues after macOS Catalina upgrade

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.
Learn more Sign up