How do I send the L and R output from an effect on a bus to two separate busses?
Sending the L and R output from a channel's stereo output to two separate busses could also work for me.
The scenario is:
Thanks
iMac Line (2012 and Later)
• Phaser channelstrip stereo -> output to Bus #x
• create 2 stereo aux channel strips
• aux 1 - input Bus #x - Insert Gain Dual Mono - reduce right gain to -96dB => you hear only the left side
• aux 2 - input Bus #x - Insert Gain Dual Mono - reduce left gain to -96dB => you hear only the right side
• Phaser channelstrip stereo -> output to Bus #x
• create 2 stereo aux channel strips
• aux 1 - input Bus #x - Insert Gain Dual Mono - reduce right gain to -96dB => you hear only the left side
• aux 2 - input Bus #x - Insert Gain Dual Mono - reduce left gain to -96dB => you hear only the right side
Thanks – this works, with the two L and R busses each panned hard L and R, so the subsequent effects' stereo output doesn't mix the two busses together.
How do I send the L and R output from an effect to two separate buses?
