LOGIC PRO X Using Allen & Heath QU-24 digital Mixer and Mac Pro 2009

After I Updated to Logic Pro X 10.4.8 on my Mac Pro 2009 with High Sierra I have had issues with my A&H QU-24. I reached out to them and then advised to contact Logic as well.................. My group of 8's have changed on my QU24 in Logic Pro X...... After the upgrade, I noticed that when I set up a new project in Logic, my projects groups were 8 white, 8 Brown and 8 Yellow groups and they all stay in that order no mater if I moved a fader from 12 to 2 in Logic prior to the upgrade........................ Now If I move a fader from the brown section it stays brown.... Like if I moved fader 12 in Logic to fader 2 it does not reflected that on the QU24. Now what is happening is that If I move that same number 12 to number 2 it moves in logic but now on the Q… The fader in logic moved to number 2 but stays as number 12 fader on the QU24..... It used to move to number 2 on the Q but no longer. Fader 12 still controls it even though it was moved to number 2 in Logic. The color on the logic screen no longer changes. The number two fader was white but the color brown moved with it…….. My DAW Control are set normal for the Mac… I see the little boxes on the DAW control on the bottom right working. I deleted the Logic Mackie controls and put new ones and that did not work…. I did a factory reset and that does not seem to have did anything to fix the issue. I have the latest firmware in it......... Allen & Heath advises that it could be some preference issues in Logic since Logic is not making the changes along with the QU-24...... Can you please help me with my problem….