On both my iMac and MacBook Air, when I change patches the volume bumps up for the patch for about 3 seconds, then drops back down to normal. Happens with every patch no matter what
iMac Line (2012 and Later)
Is it possible that signal from the previous patch is combining with signal from the newly-selected patch? I recently read a post by a user on another forum about this exact issue and the solution was to change the setting in the “Silence Previous Audio Patch” parameter (MainStage Options\Audio).
Try setting this to “immediately” and see if it fixes the problem.
Is it possible that signal from the previous patch is combining with signal from the newly-selected patch? I recently read a post by a user on another forum about this exact issue and the solution was to change the setting in the “Silence Previous Audio Patch” parameter (MainStage Options\Audio).
Try setting this to “immediately” and see if it fixes the problem.
That was it! Thanks a ton, it was killing me!
You’re most welcome!
MainStage Volume Bump on Patch Change, then goes back down
