Problem integrating my hardware synth and logic

Question

Level 1

8 points

Problem integrating my hardware synth and logic

I'm having a tough time integrating my Moog Sub Phatty and Logic pro(10.5.1).I usually open up the External Instrument Pluggin in Logic and select my hardware's name on the Midi Destination and on the Input section,specify the same audio input channel that my synth is routed to on my Audio Interface(RME-babyface).

I've connected my synth via usb, straight into my Mac and an audio out from the SubPhatty to the input of my Audio Interface with an audio cable.

Am i doing the right thing or i need to watch out for something?

My SubPhatty firmware version is 2.2.0

SubPhatty Editor version is 2.2.0

I suppose these are the latest ones.

MacOS Mojave.

Any help would be much appreciated.

Thanks in advance

Posted on Jun 20, 2020 8:35 AM

Reply

Answer 1

Pancenter

Level 6

14,782 points

Jun 21, 2020 3:00 AM in response to raja253

You are using a Software Instrument Track.

The Track is Record Enabled

In Logic's Preferences/Audio is the Baby Face set as bothe the Input and Output device. do you have Phones/Speakers plugged into the Babyface for monitoring?

In Logic Preferences/Audio/General tab Software Monitoring is enabled?

Are you sure you have audio coming into Logic, can you see the input meter register on the Babyface.

Does the Babyface have a software configuration applet, it may need to be adjusted for monitoring?

Reply

Answer 2

Pancenter

Level 6

14,782 points

Jun 20, 2020 6:00 PM in response to raja253

What do you expect to happen and what is happening.

What it means is that your synth is now running through Logic's audio engine, you can now use Logic's effects on the Moog and the synth can be treated like any software instrument and included in a "real time" Bounce.

Reply

Answer 3

raja253 Author

Level 1

8 points

Jun 20, 2020 10:39 PM in response to Pancenter

Thanks for your prompt reply Pancenter.But the problem is, after hooking up my synth and Logic exactly in the manner I've mentioned in my earlier post, there's no sound when I play my synth.All i get is the midi information without the sound.

Reply

Problem integrating my hardware synth and logic

Similar questions