MagSafe wireless charger not working with USB-C to USB adapter

It won't work because the adapter needs to be USB Power Delivery 3 (USB P.D. 3.0). Apple changed the charging requirements for MagSafe to that requirement so pretty much most of your older bricks or adapters won't work work with MagSafe or they will charge at a very slow speed. You'll need to buy an adapter that complies to that standard.

I was having a problem where my magsafe charger would stop charging after I started the car. I would have to unplug it and plug it back in to get it to work which was really annoying. Doing some research I discovered that the magsafe has a safety feature that trips it if it's getting a bad power source. I surmised that the voltage drop when my car starts must be tripping the magsafe charger off. The solution I found was to use a battery pack that can output to the USB C while also charging itself through another port. Since doing this I haven't had a problem and I have the added benefit of having a portable battery bank ready to go if I need it. I've included a link to the one that I bought. It charges itself through micro USB while simultaneously powering the magsafe through USB C. Hope this helps someone.

USB C Power Bank, 26800mAh Portable Charger USB C, Charmast Slim Thin 3A High-Speed Battery Pack Type C with 3 Input & 4 Output Compatible with MacBook, iPhone, Samsung, Pixel More https://www.amazon.com/dp/B07P5ZP943/ref=cm_sw_r_cp_api_glt_fabc_21RWZY0ZYBFMY0V5J957?_encoding=UTF8&psc=1

Does Apple sell or recommend a USB Power Delivery 3.0 that is USb-C to USB 3.0