M1 Mac mini 48" LG CX set up

I have an M1 Mac mini hooked up to an LG CX via a Belken UHD High Speed HDMI cable. Every so often the HDR on my Mac mini cuts in and out. The colors are nice and beautiful, than all of a sudden the image looks icky and I check my display settings and HDR magically became unchecked. Sometimes I recheck it and it's fine for a while, other times I recheck it and two seconds later the image becomes dull once more. I don't know if it's an issue with the Mac or the TV, or the cable or me, but I suspect it's the Mac.

OLED48CXPUB,

Posted on Jan 17, 2021 7:51 AM

Similar questions

M1 MBook Air 2020 gets rubbish LG27qn880 results Hi all. I just got my LG out of the box and have connected both the HDMI and USB C cables that came with the monitor. In short, the pictures are awful, and when moving say photos around the screen I can see windows open that are behind it as ghosts and contrast and colours horrible. I've looked at the resolution, messed with the LG settings but it's just not playing ball. Doesn't make a difference whether using the USB C or HDMI connections. Im in mirror mode and it's fine on the MB Air screen. Using Ventura. Thanks for any ideas of what to try next.
276 1
Mac mini 2020 drops hdmi video connection (intel chip) I just bought a mini 2020intel to replace my 2011 mini. It is fast, but at least 1x a day or overnight the video feed fails until I do a hard reset. Then it loses the adjustment I have to make to the display to make the image fit the screen. The monitor is a bit long in the tooth, 2014 or so but I never had this problem with the older mini. I am using hdmi connection on both mini and monitor. Previously used digital connection mini to monitor. The hard reset results in unsaved work when this occurs in the middle of the day, which it does about once a week. Any thoughts thanks.
1003 3
Mac Studio M2 Ultra and HDMI issue Hello! Just bought Mac Studio M2 Ultra on which I use Apple Studio Display (connected to TB port) and Samsung TV on HDMI (I use a quality HDMI 2.1 cable). The first day everything worked normally, until after 20 minutes of non-use the displays went to sleep. After "waking up", only Studio Display started working, the TV connected to HDMI was no longer detected (not even in System Preferences). I tried with another cable, with two other displays (Huawei 24" and DELL 27" computer displays), but the same problem. I went into DFU mode and "revive" again, which didn't help. Even a brand new reinstall of the system (system restore) did not help. What could happen? Does anyone have a similar problem? BTW, the same HDMI cable with the same display, connected to my good old Mac Pro 5.1 (with RX580 and Monterey) works normally.
2580 7

There are no replies.

This thread has been closed by the system or the community team. You may vote for any posts you find helpful, or search the Community for additional answers.

M1 Mac mini 48" LG CX set up

Welcome to Apple Support Community

A forum where Apple customers help each other with their products. Get started with your Apple Account.

Learn more Sign up