Mac Pro 13'' 2020 can not recognize HDMI, VGA and connect to external display.
I can not connect to my display by Vention hub, HDMI VGA not recognize, MacOSBig Sur Display setup preference also do not show arrangement and connect to my monitor
MacBook Pro 13″, macOS 11.1
yes indeed says plug and play and claims to support Macs.
--------
to get a Mac display to become active, you need the Mac to query the display, and the display to answer with its name and capabilities. Otherwise, the display will not be shown as present, and no data will be sent to the display. "No signal detected" is generated by the DISPLAY, not by the Mac.
This query is only sent at certain times:
• at startup
• at wake from sleep
• at insertion of the Mac-end of the display-cable, provided everything on that cable is ready-to-go
• on invoking Option-(Detect Display) button in Displays preferences (from another display)
so try doing some of those things and see if the display comes alive.
Modern Displays with multiple ports are sometimes busy scanning the other ports, looking for an input, and miss the query from the Mac. They need to pay attention to the port you are actually using, or they will miss the query.
Some displays have On-Screen Display settings that can be used to tell the display a computer is attached on a certain port, or a certain port should be highest priority. Changing those may make your display more responsive.
Some displays include their own private "sleep" settings for the display alone. This can allow the display to enter its own sleep mode, on top of the Mac's not sending it data. A display that is sleeping on its own cannot respond to the Mac's query, and will stay dark.
yes indeed says plug and play and claims to support Macs.
--------
to get a Mac display to become active, you need the Mac to query the display, and the display to answer with its name and capabilities. Otherwise, the display will not be shown as present, and no data will be sent to the display. "No signal detected" is generated by the DISPLAY, not by the Mac.
This query is only sent at certain times:
• at startup
• at wake from sleep
• at insertion of the Mac-end of the display-cable, provided everything on that cable is ready-to-go
• on invoking Option-(Detect Display) button in Displays preferences (from another display)
so try doing some of those things and see if the display comes alive.
Modern Displays with multiple ports are sometimes busy scanning the other ports, looking for an input, and miss the query from the Mac. They need to pay attention to the port you are actually using, or they will miss the query.
Some displays have On-Screen Display settings that can be used to tell the display a computer is attached on a certain port, or a certain port should be highest priority. Changing those may make your display more responsive.
Some displays include their own private "sleep" settings for the display alone. This can allow the display to enter its own sleep mode, on top of the Mac's not sending it data. A display that is sleeping on its own cannot respond to the Mac's query, and will stay dark.
You may need a new Driver for the Hub after updating to Big Sur, because it treats extensions differently.
How come? It must be plug and play as technical guides. Where I can find the driver, from adapter seller or Apple support?
what Make&model hub, or a link to its specifications
Correct! Helpful answer, I was able to isolate the problem of inside chip of Vention Hub and replaced another hub.
Thanks!
External Display can not connect
