My iPad will not print to my Epsom printer, despite showing connected to my home wifi for both. My phones will both print. Only difference is that our iPads are updated to 14.5.1, and as yet our iPhones are not is this a problem with the update?

If set-up correctly, should you continue to experience difficulties, your WiFi Router may be unexpectedly failing to pass Apple Bonjour traffic on you local network - or your WiFi Router or Network Switch may be blocking this device discovery protocol.

The Apple Bonjour protocol uses mDNS (Multicast DNS) UDP port 5353.

You may find that restart of your network components will resolve the problem. You’ll need to restart your network devices in the correct order. Assuming that you WiFi Router provides DNS services for your network, restart devices in this order - allowing time for devices to fully boot/restart prior to restarting other devices:

• WiFi Router
• Upstream wired Network Switch(es)
• WiFi Access Points / Network Extenders
• Other fixed infrastructure devices - such as Printers
• Client devices

Restarting your iPad, after restarting other devices in the correct sequence, is most simply achieved by a forced-restart of the iPad:

• On an iPad with a Home button: Press and hold the top button and the Home button at the same time. When the Apple logo appears, release both buttons.
• On an iPad with Face ID: Press and quickly release the volume up button, press and quickly release the volume down button, then press and hold the top button. When the Apple logo appears, release the button.