Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Could not connect with Wi-Fi Internet after updation latest version

Not able to connect to Internet or frequently disconnect Internet

MacBook Air 13″, 12.1

Posted on Feb 4, 2022 10:29 PM

Reply
Question marked as Best reply

Posted on Feb 4, 2022 10:53 PM

yatinjagtap Said:

"Could not connect with Wi-Fi Internet after updation latest version: Not able to connect to Internet or frequently disconnect Internet"

-------


Troubleshooting Mac Wi-Fi:

A few thoughts to try...

I. Clear the Temporary Internet Files:


II. Restart your Router:

  1. Power: off the router
  2. Wait: 30 seconds
  3. Power: It back on


III. Boot in Safe Mode:

In Safe ModeLogin Items do not run at login, certain preferences are set aside, and damaged system files are then reset. So, once booted in to Safe Mode, wait 30 seconds, and then boot up normally, attempting another update install. For instructions, go here: How to Use safe Mode on your Mac - Apple Support


IV. Try a New Admin User:

What happens when you create a new administrator user, and log into it? Do you still get this error? If not, then it is likely an error with the current user. If so, then it is likely an error with your Mac.


V. Reset your SMC and your NVRAM:

(Applies to Intel-Basel Macs Only) Sometimes changes (i.e. Installations) are made to the system and then settings (i.e. Networking) become corrupted, technically. So, reset both on your Mac. So, reset the SMC and reset the NVRAM or PRAM. It might take three tries. to fix this. So, be certain you have the time to do so.

Start With This:

2 replies
Question marked as Best reply

Feb 4, 2022 10:53 PM in response to yatinjagtap

yatinjagtap Said:

"Could not connect with Wi-Fi Internet after updation latest version: Not able to connect to Internet or frequently disconnect Internet"

-------


Troubleshooting Mac Wi-Fi:

A few thoughts to try...

I. Clear the Temporary Internet Files:


II. Restart your Router:

  1. Power: off the router
  2. Wait: 30 seconds
  3. Power: It back on


III. Boot in Safe Mode:

In Safe ModeLogin Items do not run at login, certain preferences are set aside, and damaged system files are then reset. So, once booted in to Safe Mode, wait 30 seconds, and then boot up normally, attempting another update install. For instructions, go here: How to Use safe Mode on your Mac - Apple Support


IV. Try a New Admin User:

What happens when you create a new administrator user, and log into it? Do you still get this error? If not, then it is likely an error with the current user. If so, then it is likely an error with your Mac.


V. Reset your SMC and your NVRAM:

(Applies to Intel-Basel Macs Only) Sometimes changes (i.e. Installations) are made to the system and then settings (i.e. Networking) become corrupted, technically. So, reset both on your Mac. So, reset the SMC and reset the NVRAM or PRAM. It might take three tries. to fix this. So, be certain you have the time to do so.

Start With This:

Could not connect with Wi-Fi Internet after updation latest version

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple ID.