You can make a difference in the Apple Support Community!
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.
I have a new M1 Studio and wonder how I can attach my other three 3.5 and a couple of SSD hard drives that were in my Mac Pro 5,1 to the new computer so they will show up on my screen. Would some kind of a multiple box be used, and if so, how could I power it. Any help appreciated.
[Re-Titled by Moderator]
Mac Studio
A wide assortment of single and multiple drive enclosures appropriate for your exact model Mac can be found at Mac-centric Illinois,USA Vendor OWC. They pride themselves on their Mac support, so anything they recommend works with your Mac AND is trouble-free.
If you are not in the US, you can sill use their site and recommendations as a guide for purchasing in your market.
Use the "My Upgrades" link at the center top of the page and specify your Mac to get recommendation for ONLY your model Mac (not a lot of chaff).
Do you more ports than what the studio has? You can use USB-C to USB-A adapters to use the 3.5" drives to TB ports and you also have two rear USB-A ports and two USB-C front ports. If you need more just connect a hub.
Mac Pro 5,1 has four drive bays internally for 3.5-in SATA drives, and can be adapted to 2.5-in SATA drives such as SSD drives. But when you unbolt the drive "sled", you are left with a bare SATA drive -- no power, no enclosure, no cables.
--That is why the dilemma about "what else do I need to make this "GO"?
How to connect multiple external drives to Mac Studio?
