You can make a difference in the Apple Support Community!

When you sign up with your Apple Account, you can provide valuable feedback to other community members by upvoting helpful replies and User Tips.

Looks like no one’s replied in a while. To start the conversation again, simply ask a new question.

Failed Update

Trying to install update and it says not connected to the internet?


Posted on Nov 29, 2022 9:20 PM

Reply
Question marked as Top-ranking reply

Posted on Nov 30, 2022 4:15 AM

This support page may be helpful with initial troubleshooting of WiFi connection difficulties:

If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support


If your WiFi has been set-up according to Apple’s recommended settings, WiFi and Internet connection difficulties are usually an indication that your device does not have a routable IP Address - your IP Address usually being assigned by DHCP. When this occurs, your iPad may only have a self-assigned link-local IP address that begins 169.254.x.x.


System software updates can, in some circumstances, trigger a problem with the iPad (or iPhone) internal routing table. The causes are many, but are usually attributable to some types of App or associated device configuration.


If you have a VPN App or profiles installed, or a security App such as Norton, these may be interfering with DHCP - and preventing your device from obtaining a valid IP Address for the WiFi network/hotspot to which you are attempting to connect. The resolution is usually simple; if installed, you may only need to temporarily disable or remove the Security App and/or VPN.


If you continue to have difficulties and your iPad is running iPadOS, check to see if your iPad is using the new WiFi Private Address feature. This feature is intended to provide additional privacy and security when using “public” (untrusted) WiFi networks.

Settings > WiFi > [Your WiFi Network / SSID] - tap the “i” icon - Private Address


The Private Address feature is largely unnecessary for your home WiFi network; if enabled, Private Addressing can cause issues if specific MAC addresses are expected by your WiFi Router. You may need to disable this feature - and can be enabled or disabled for each individual network.


Use private Wi-Fi addresses in iOS 14, iPadOS 14, and watchOS 7 - Apple Support


DHCP is frequently used to automatically obtain an IP Address. Until your iPad has a valid IP Address to connect to your network, you will not have an internet connection. Disabling or removing VPN and/or the offending security App should allow DHCP to operate normally - allowing connection to your network and the internet.


If this resolves your issue, the VPN and/or security App can be reinstated after the connectivity problem has been resolved.



As an alternative approach to updating your iPad, instead of attempting the update directly from iPad settings, consider using a computer to perform the update. To do so, you will need access to either a Window PC (with iTunes for Windows installed) or a Mac (with iTunes or Finder - as appropriate for the installed version of MacOS). Ensure that your installed version of iTunes has been updated to the most recent version; the essential device drivers are included.

Download and use iTunes for Windows – Apple Support

Update to the latest version of iTunes – Apple Support

Update software on iPhone, iPad or iPod touch in iTunes on PC - Apple Support


2 replies
Question marked as Top-ranking reply

Nov 30, 2022 4:15 AM in response to Officialteddy11

This support page may be helpful with initial troubleshooting of WiFi connection difficulties:

If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network - Apple Support


If your WiFi has been set-up according to Apple’s recommended settings, WiFi and Internet connection difficulties are usually an indication that your device does not have a routable IP Address - your IP Address usually being assigned by DHCP. When this occurs, your iPad may only have a self-assigned link-local IP address that begins 169.254.x.x.


System software updates can, in some circumstances, trigger a problem with the iPad (or iPhone) internal routing table. The causes are many, but are usually attributable to some types of App or associated device configuration.


If you have a VPN App or profiles installed, or a security App such as Norton, these may be interfering with DHCP - and preventing your device from obtaining a valid IP Address for the WiFi network/hotspot to which you are attempting to connect. The resolution is usually simple; if installed, you may only need to temporarily disable or remove the Security App and/or VPN.


If you continue to have difficulties and your iPad is running iPadOS, check to see if your iPad is using the new WiFi Private Address feature. This feature is intended to provide additional privacy and security when using “public” (untrusted) WiFi networks.

Settings > WiFi > [Your WiFi Network / SSID] - tap the “i” icon - Private Address


The Private Address feature is largely unnecessary for your home WiFi network; if enabled, Private Addressing can cause issues if specific MAC addresses are expected by your WiFi Router. You may need to disable this feature - and can be enabled or disabled for each individual network.


Use private Wi-Fi addresses in iOS 14, iPadOS 14, and watchOS 7 - Apple Support


DHCP is frequently used to automatically obtain an IP Address. Until your iPad has a valid IP Address to connect to your network, you will not have an internet connection. Disabling or removing VPN and/or the offending security App should allow DHCP to operate normally - allowing connection to your network and the internet.


If this resolves your issue, the VPN and/or security App can be reinstated after the connectivity problem has been resolved.



As an alternative approach to updating your iPad, instead of attempting the update directly from iPad settings, consider using a computer to perform the update. To do so, you will need access to either a Window PC (with iTunes for Windows installed) or a Mac (with iTunes or Finder - as appropriate for the installed version of MacOS). Ensure that your installed version of iTunes has been updated to the most recent version; the essential device drivers are included.

Download and use iTunes for Windows – Apple Support

Update to the latest version of iTunes – Apple Support

Update software on iPhone, iPad or iPod touch in iTunes on PC - Apple Support


Failed Update

Welcome to Apple Support Community
A forum where Apple customers help each other with their products. Get started with your Apple Account.