hp printer driver ventura

Hello Everyone! I have been searching for an answer for this same problem, and finally came up with a solution. When you add the printer, just select "other software" (not the generic type), and in the drivers list, you should select HP LaserJet Pro MFP M125-M126. This made my HP Laserjet Pro M12w printer work with a Mac Book Pro M1 2021, Ventura 13. Hope it works for you too.

Install the app HP Smart from the Mac App Store that should fix it.

This solution worked for me (HP LaserJet MFP M28w, Ventura 13.01, MacBook Pro). Thanks a million!

lrizos

Jan 4, 2023 7:12 PM in response to nmjake18

I dowloaded the software from the following link on apple and it worked

HP 5.1.1 Printer Software Update

All the best

Leon

Better to look at HP's website and check if they provide a Ventura compatible drive for your printer model:

https://support.hp.com/us-en/drivers/printers

Hi,

Which exact HP printer model? It is difficult to answer your question without this information.

I had to download drivers from a couple of different hp sites. I'm not sure at this point, which one finally worked. However, here is one link to hp drivers: https://123.hp.com/us/en/

It is best if you can locate the latest driver for your particular printer model. Here is the link I used for mine, which you may be able to customize to access your model: https://support.hp.com/us-en/product/hp-laserjet-pro-m118-m119-series/21996892/model/21996893

Hi NadiaBR,

Have you tried the V3.93.08 universal driver https://ftp.hp.com/pub/softlib/software13/printers/SS/Print_Common_SW/Samsung_Mac_Driver_V3.93.08.dmg ?

https://support.hp.com/us-en/drivers/selfservice/samsung-xpress-sl-m2070-laser-multifunction-printer-series/16450377/model/16450379

Also, if you have one of the following (exact) models, AirPrint should work:

• Samsung Xpress M2070FW
• Samsung Xpress M2070W

About AirPrint - Apple Support

Have you rebooted since you installed the 5.1 driver? If not do so.

Thanks but no success.

The only solution for me at this moment is to connect the printer with USB to my iMac i7 running OS12 and share the printer over my network.

And hope HP and others come up with a solution.

I see many many users cannot print with several brands of printers since 13.1

Hope for the best,

Greets from Austria

For USB solution, I've used HP easy start and HP easy admin, with success.

You must do exactly what to do with them !

Good luck,

Hi,

As you probably know, the HP support page for the M12w only offers drivers for macOS 10.14 and earlier.

https://support.hp.com/us-en/drivers/selfservice/hp-laserjet-pro-m11-m13-printer-series/9365405/model/9365409

If this driver does not work with macOS 13 Ventura, any luck with HP Easy Admin?

https://support.hp.com/us-en/document/c06164609

Have you rebooted since installing it? Boot into Safe Mode according to How to use safe mode on your Mac and see if you can print from there. Reboot normally and test again.

Note:  if you have a wireless keyboard with rechargeable batteries connect it with its charging cable before booting into Safe Mode.  This makes it act as a wired keyboard as will assure a successful boot into Safe Mode.

I dowloaded the software from the following link on apple and it worked

HP 5.1.1 Printer Software Update

All the best

Leon

I have a Macbook Air running Ventura 13.2

I am trying to print from this laptop to my HP Envy 100 D410 series printer.

My printer appears "offline" or non-responsive despite being online + connected to the same wifi network.

I ran HPSmart "Fix & Diagnose" and it tells me there is a driver error. I then went to the HP website to see if there was anything there + this is what I found: https://support.hp.com/us-en/drivers/selfservice/hp-envy-100-e-all-in-one-printer-series-d410/4073853

I am not tech savvy - does this mean that my printer is no longer compatible with my Macbook because I updated to Ventura?

Please help :(

Cela fonctionnait très bien avec Ventura 13.1, quelle est la modification dans 13.2 qui empêche d'accéder en wifi à l'imprimante ? Le problème est apparu après la mise à jour de cette semaine.

J'ai réussi à retrouver l'accès (au wifi) après désinstallation complète sur mon iMac, mais quand j'ai voulu aussi imprimer à partir du MacBook Air l'accès n'est plus permis en wifi, seul le câble USB relié permet d'imprimer.